Page 2 - Table Of Contents
1 Table Of Contents Important Safety Instructions--------------------------------------------------1 Product Features ------------------------------------------------------------------3 Disc Information -------------------------------------------------------------------4 Front Panel-----------------...
Page 3 - Important Safety Instructions
- 2 - Important Safety Instructions CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. POWER SUPPLY : Connect the supplied adapter to the side of the DVD player in the slot marked “Power In”. Plug the two-prong end o...
Page 4 - Copyright Protection
- 3 - Important Safety Instructions Note: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Maintain well ventilated conditions around the product...
Page 5 - Product Features; Multiple Mode; Advanced Playing Features
- 4 - Product Features This product incorporates DVD player, LCD display and TV receiver in one system. Multiple Mode DVD mode Component mode VGA mode TV mode CVBS mode S-VIDEO mode High Quality Property High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 li...
Page 6 - Disc Information; Discs Formats Supported By This Player; DVD; JPEG; About Disc Terms; Chapter
- 5 - Disc Information Discs Formats Supported By This Player DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) 242min(SS-DL) 266min(DS-SL) DVD Audio+Video (active picture) 12cm 484min(DS-DL) CD Audio 12cm 74min JPEG Still high resolution 12cm The operating method of some DVD discs is specified by ...
Page 7 - Front Panel
- 6 - Front Panel 1. 20" color TFT screen 20" color TFT screen. 2. SOURCE button Press to select the modes: DVD, Component, VGA, TV, CVBS or S-VIDEO. 3. MENU button Press to enter or exit setup menu. 4. CH ▲ / ▼ button In the TV mode, press to select channels. In setup menu, the same functio...
Page 9 - Rear Panel; TV Signal Input Jack
- 8 - Rear Panel 1. Y/Pb/Pr Input Jack Connected to the Y/Pb/Pr input in Component mode. 2. L/R Audio Input Jack Connected to the L/R audio input in Component mode. 3. AV Output Jacks Connected to the external AV input device. 4. AV and S-Video input Jacks In the S-VIDEO mode, connected to S-VIDEO s...
Page 10 - Remote Control; Remote Control Drawing
- 9 - Remote Control Remote Control Drawing 1. POWER button Press to enter or exit the standby mode. 2. 0~9 Number buttons Press to select numbers. 3. LAST button In the TV mode, press to return to the channel last viewed. 4. MTS button Press to activate MTS function in TV mode. 5. VOL +/- button Pr...
Page 12 - Preparation of Remote Control
- 11 - Remote Control Preparation of Remote Control Softly push the back cover to open the battery compartment. Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. Softly press the back cover to close it. Under normal use the battery will la...
Page 13 - System Connections; Connecting to External AV Signal Source
- 12 - System Connections Do not connect the power cord until all other connections have been made. Ensure that you observe the color cord when connecting audio and video cables. Connecting to External AV Signal Source Use the audio and video cable to connect the AV input jacks on the rear panel of ...
Page 14 - Connecting to External AV Signal Source YPbPr
- 13 - System Connections Connecting to External AV Signal Source YPbPr Use the audio and video cables to connect the Y/Pb/Pr input Jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and external AV signal source and then press the S...
Page 15 - Connecting to External AV Device (AV Out)
- 14 - System Connections Connecting to External AV Device (AV Out) The unit supports audio and video signal input function, it can be connected to the external audio and video device. Use the audio and video cables to connect the AV output Jacks on the rear panel of the unit to the external AV inpu...
Page 16 - Connecting to PC
- 15 - System Connections Connecting to PC The unit can be connected to PC (personal computer) via the VGA cable. Follow the steps and the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit. 2. Connect the other end to the PC. 3. Connect ...
Page 17 - Connecting to Earphones
- 16 - System Connections Connecting to Earphones This unit can be connected to an earphone for listening to music privately. See the below figure for details: After connecting to the earphone, the internal speakers output will turn off automatically. Connecting to Power Adapter Power is supplied th...
Page 18 - Connecting to TV Antenna
- 17 - System Connections Connecting to TV Antenna This unit can be connected to the TV signal input source via the TV jack on the rear panel. After connection, turn on the power of the unit, press the SOURCE button to shift to TV mode. After connecting to the antenna, turn on the unit, and go on wi...
Page 19 - TV Setup and Operation; Preparations
- 18 - TV Setup and Operation Preparations 1. After connection, press the POWER button to turn on the power. (If it is turned on, the power indicator is blue.) 2. Press the SOURCE button to shift to TV mode. You can go on with the following operations: Image Setting Note: This item is only available...
Page 22 - Parental Setting
- 21 - TV Setup and Operation Parental Setting Note: The Parental Function is the same as that of V-CHIP. Press the MENU button to enter the setupmenu. Press the ▲▼ button to select Parental and press the ENTER button to enter the menushown on the right. In the Parental setup menu, press the ENTER b...
Page 28 - DVD Playback Operation; DVD Playback
- 27 - DVD Playback Operation Preparation After connections, turn on the unit and select the relevant video input before playback. Disc Loading Steps: 1. Press the POWER button to turn on the power. Press the SOURCE button to shift to DVD mode. 2. Handing the disc with its printed side outward verti...
Page 30 - CD Playback
- 29 - DVD Playback Operation Language (Audio) There can be up to 8 audio languages on a DVD disc. When you play a multi-language DVD disc you can press the AUDIO button to select different audio languages. Subtitle The DVD player can support multiple kinds of subtitles. When you play a multi-subtit...
Page 31 - JPEG Playback
- 30 - DVD Playback Operation Fast Playback Press the or button on the remote control to activate fast forward or backward playback. Repeat Use the REPEAT button repeatedly to repeat Single, All or to cancel repeat. Some discs do not support the repeat function. Goto Press the GOTO button to access ...
Page 34 - DVD System Setup
- 33 - DVD System Setup Preparations 1. Connect to the power supply and turn on the unit. 2. Press the SOURCE button to shift to DVD mode. 3. Press the SETUP button on the remote control to display the settings menu. The menu includes General setup, Audio setup, Video setup, Preference and Password ...
Page 36 - Audio Setup Page
- 35 - DVD System Setup Media Center Audio Setup Page Press the SETUP button to enter the General setup menu, then use the direction buttons to select Audio Setup Page, the screen will display as the below: Dolby Digital Setup Dual Mono In the menu, Use the direction buttons to select the desired it...
Page 37 - Video Setup
- 36 - DVD System Setup Dynamic Hdcd Setup In the Audio Setup Page, use the direction buttons to select Hdcd Setup , press the ENTER button to enter the setup, the screen will display as below: Video Setup Press the SETUP button to enter the General setup menu, then use the direction buttons to sele...
Page 39 - Preference Setup
- 38 - DVD System Setup Preference Setup Press the SETUP button to enter the General setup menu, then use the direction buttons to select Preference Page, the screen will display as the below: Audio Subtitle Disc Menu In the menu, Use the direction buttons to select the desired item. Press the ENTER...
Page 40 - Password Setup
- 39 - DVD System Setup Parental Default Password Setup Press the SETUP button to enter the setup menu, then use the direction buttons to select Password Setup Page, the screen will display as the below: 3. Press the direction buttons to select Default . 4. Press the ENTER button, all the settings w...
Page 42 - Other Functions; External AV Input Function
- 41 - Other Functions External AV Input Function The unit has external AV input function. It supports CVBS, S-VIDEO and Component modes. Use the audio, video and S-Video cable to connect the unit to the external AV signal source such as recorder, vidicon, satellite receiver or game player etc. Then...