Page 3 - SILENT ARMING - ACTIVE (Must be activated during programming)
128-7404 3 of 24 Page 3 known as a code grabber, which will receive and store the signal from your keychain transmitter and re-transmit at a later time to disarm your system.Your Keeloq Code Hopping transmitters will change their signal every time the button is pressed, so when a thief grabs then re...
Page 4 - PROTECTION WHILE THE SYSTEM IS ARMED
128-7404 4 of 24 Page 4 þ The dash mounted LED begins to flash slowly. þ Parking Lights flash one time. þ Siren will not sound. If the siren "chirped" three times, sometime after arming, the exclusive delayeddome light learn circuit has been programmed and the system detected a openentry poi...
Page 9 - NOTE: Shock Sensor Icon Is Displayed On The LCD Panel.
128-7404 9 of 24 Page 9 3. If the chirps were on before you started, then you will hear two chirps indicat- ing they have been turned off. If the chirps were off before you started, then you will hear one chirp indicating they have been turned on.NOTE: Whenever the chirps are bypassed, the 4-chirp i...
Page 11 - TO BEGIN THE AUTOMATIC START UP TIMER
128-7404 11 of 24 Page 11 To Remote Start The Vehicle:Press and release the programmed channel of your keychain transmitter two times within 2 seconds. The vehicle will start and remain running for the pre- programmed 5, 10, 15, or 20 minutes. As a visual indication, the parking lights will flash or...
Page 14 - When Armed, Press the Disarm/Unlock button to
128-7404 14 of 24 Page 14 Anytime the engine is running for more than 15 seconds:1) Place the the gear selector in park.2) Set the parking, (hand), brake.3) Be certain your foot is off the brake pedal.4) Press the program/Push-Button switch 2 times within 5 seconds.The parking lights will flash two ...
Page 15 - ADDITIONAL ICONS THAT MAY BE DISPLAYED ARE:
128-7404 15 of 24 Page 15 Note Engine can be started in many modes armed, disarmed,valet, etc... The screen shown is Locked/Armed and running. When Panic Mode has been activated and the system isarmed the vehicle's lights, the lock and the siren icon willflash on the LCD screen. If the system is dis...
Page 18 - indicating that someone is calling you to the vehicle.
128-7404 18 of 24 Page 18 the transmitter will emit a tone confirming the feature is active. Note: the unit will start once and run for the prescribed time. If you require more frequent starting please refer to auto start up timer mode shown earlier in this guide. NOTE: To insure accurate 24 Hour St...
Page 22 - THIS PAGE LEFT BLANK INTENTIONALLY
128-7404 22 of 24 Page 22 THIS PAGE LEFT BLANK INTENTIONALLY
Page 23 - SYSTEM FUNCTIONS AT A GLANCE; DASH LED INDICATORS
128-7404 23 of 24 Page 23 APS 998 SYSTEM FUNCTIONS AT A GLANCE DASH LED INDICATORS RAPID FLASHING = PASSIVE ARMING/ACTIVE REARMINGSLOW FLASHING = ARMED OFF = DISARMED ON SOLID = VALET MODE 3 FLASH...PAUSE = INTRUSION ZONE 3 2 FLASH...PAUSE = INTRUSION ZONE 2 1 FLASH...PAUSE = INTRUSION ZONE 1 SIREN ...