Audiovox APS-596 - Manuals - manualsarea.com

Page 2 - YOUR “ Code Hopping “ TRANSMITTERS; will not; ARMING THE SYSTEM - ACTIVE

128-7131 2 of 16 YOUR “ Code Hopping “ TRANSMITTERS The transmitters included with your new security system use the most advancedand secure form of radio frequency transmission available on any currentautomotive security system. Some of today’s sophisticated auto thieves use adevice known as a code ...

Page 3 - PROTECTION WHILE THE SYSTEM IS ARMED

128-7131 3 of 16 entry point after the learned delay expired. Closing the hood, trunk, or doors willcorrect the problem and you do not need to disarm the system to make the correc-tion. # Doors Lock - Optional # Headlight Illumination - Optional ARMING THE SYSTEM - PASSIVE ( AUTOMATIC ) 1. Turn off ...

Page 5 - Headlight Illumination - Optional; WHILE THE SYSTEM IS SOUNDING; turns on. The LED will remain on as long as the system is in valet mode.

128-7131 5 of 16 transmitter has a separate lock/unlock buttons, pressing the unlockbutton anytime after the first unlock command will cause all the vehicledoors to unlock. # Headlight Illumination - Optional WHILE THE SYSTEM IS SOUNDING If during a triggered state, you wish to shut off the siren wi...

Page 6 - Programming Your Custom Override Code:; override sequence. Turn the ignition switch to the on position.

128-7131 6 of 16 MANUALLY OVERRIDING YOUR SYSTEM:USING THE VALET SWITCH MANUAL OVERRIDE Your Security System can be disarmed without the use of the keychain transmitter.This is necessary, since you will need the ability to operate your vehicle if thetransmitter is lost or its battery fails. If your ...

Page 7 - Custom Code Programming Example:; (The siren or horn will beep and the lights will flash one time.); ELIMINATING THE NORMAL ARM / DISARM CHIRPS

128-7131 7 of 16 Custom Code Programming Example: To Change the code from the factory pre-assigned code of 11 to “52” you would dothe following: 1. Disarm the system by use of the transmitter, or by use of the emergency override sequence. 2. Turn the ignition switch to the on position.3. Within 10 s...

Page 8 - REMOTE PANIC OPERATION

128-7131 8 of 16 can be turned off permanently, eliminating the need to hold the ARM / DISARM buttonfor two seconds. To do this, 1. Turn the ignition key on then off.2. Within 10 seconds, press and release the valet push button switch three times. 3. If the chirps were on before you started, then yo...

Page 9 - IGNITION CONTROLLED LOCK UNLOCK:

128-7131 9 of 16 ADDITIONAL REMOTE FUNCTION ( CHANNEL 4 ) This security system has an additional feature that can be connected to a numberof different optional accessories. Some of the more common uses for this channelare: # Remote Trunk Release # Remote Car Starter # Remote Window Closure # Remote ...

Page 15 - SYSTEM FUNCTIONS AT A GLANCE; DASH LED INDICATORS

128-7131 15 of 16 APS-596 SYSTEM FUNCTIONS AT A GLANCE DASH LED INDICATORS RAPID FLASHING = PASSIVE ARMING SLOW FLASHING = ARMED OFF = DISARMED ON SOLID = VALET MODE 3 FLASH...PAUSE = INTRUSION ZONE 3 2 FLASH...PAUSE = INTRUSION ZONE 2 1 FLASH...PAUSE = INTRUSION ZONE 1 SIREN CHIRP INDICATORS *1 CHI...