Audiovox 128-8128 - Manuals

Page 2 - YOUR “CODE HOPPING“ TRANSMITTERS

128-8128 2 of 24 Page 2 Protected Push Button Valet/Override Switch 7-Function LED-Arm / Disarm / Zone 1 / Zone 2 / Zone 3 / Valet / Arming Intrusion Alert With Memory Instant Siren Activation Starter Disable Output Additional Engine Immobilizer Output, (Optional Relay Required) True L...

Page 3 - will not; ARMING THE SYSTEM - ACTIVE

128-8128 3 of 24 Page 3 known as a code grabber, which will receive and store the signal from your keychain transmitter and re-transmit at a later time to disarm your system.Your Keeloq Code Hopping transmitters will change their signal every time the button is pressed, so when a thief grabs then re...

Page 4 - PROTECTION WHILE THE SYSTEM IS ARMED

128-8128 4 of 24 Page 4 ; The dash mounted LED begins to flash slowly. ; Parking Lights flash one time. ; Siren will not sound. If the siren "chirped" three times, sometime after arming, the exclusive delayeddome light learn circuit has been programmed and the system detected a openentry poi...

Page 5 - SILENT DISARMING

128-8128 5 of 24 Page 5 ; Any mild impact to the vehicle’s glass will cause the alarm to sound a short series of warning tones. ; Any strong impact to the vehicle’s glass will cause the alarm to trigger for the full 30 second alarm cycle. NOTE: If the optional interior illumination circuit was insta...

Page 7 - PROGRAMMING YOUR CUSTOM OVERRIDE CODE:

128-8128 7 of 24 Page 7 LED turns on solid. The system will remain in the valet mode. 3. To return to normal operation, press and release the pushbutton switch any time the ignition is on. NOTE: Always remember to return the system to normal operation. This will ensure that the vehicle remains prote...

Page 8 - the need to hold the ARM / DISARM button for 2 seconds. To do this:

128-8128 8 of 24 Page 8 Custom Code Programming Example: To Change the code from the factory pre-assigned code of 11 to “52” you would do the following: 1. Disarm the system by use of the transmitter or by use of the emergency override sequence. 2. Turn the ignition switch to the on position.3. With...

Page 10 - REMOTE STARTING THE VEHICLE

128-8128 10 of 24 Page 10 4. Stage 3 (City Mode) In this mode, the pre-detect chirps will change from six pre-warning tones to a full 10 seconds of warning chirps. The full detect trigger duration will be reduced from 30 seconds to 15 seconds. NOTE: Setting the stage of the shock sensor will be effe...

Page 13 - TURBO TIMER MODE

128-8128 13 of 24 Page 13 Remote Car Starter Remote Window Closure Remote Garage Door Interface To remotely operate the device indicated, momentarily press, or press and hold the appropriate transmitter button(s) as indicated above. ADDITIONAL REMOTE FUNCTION ( CHANNEL 6 ) Channel 6 is an alte...

Page 14 - TRANSCEIVER ICONS AND THEIR INDICATIONS

128-8128 14 of 24 Page 14 To activate the turbo timer:Anytime the engine is running for more than 15 seconds:1) Place the gear selector in park.2) Set the parking, (hand), brake.3) Be certain your foot is off the brake pedal.4) Press the program/Push-Button switch 2 times within 5 seconds.The parkin...

Page 16 - ADDITIONAL ICONS THAT MAY BE DISPLAYED ARE:

128-8128 16 of 24 Page 16 Triggered and entry attempt was made to the vehicles glass, orthe vehicle has been hit or bumped hard enough to cause aresponse from the vibration detector. ADDITIONAL ICONS THAT MAY BE DISPLAYED ARE: If the arm/disarm chirp tones have been turned off at the ve-hicle, when ...

Page 18 - Parking Meter Counter:

128-8128 18 of 24 Page 18 set time. To toggle this feature off, press the option + lock buttons simulta- neously until a beep is heard and the 24 hr timer turns off. Note: the unit will start once and run for the prescribed time. If you require more frequent starting please refer to auto start up ti...

Page 19 - Temperature Start Mode.

128-8128 19 of 24 Page 19 corner of the screen as shown left. This icon indicates a new batteryshown with 3 bars. As the battery deteriorates, the bars will disappear. 1bar indicates the battery should be replaced. Replace battery with a fresh 1.5V AAA battery and dispose of the used battery properl...

Page 20 - THIS PAGE LEFT BLANK INTENTIONALLY

128-8128 20 of 24 Page 20 THIS PAGE LEFT BLANK INTENTIONALLY

Page 23 - SYSTEM FUNCTIONS AT A GLANCE; DASH LED INDICATORS

128-8128 23 of 24 Page 23 APS 997a SYSTEM FUNCTIONS AT A GLANCE DASH LED INDICATORS RAPID FLASHING = PASSIVE ARMING/ACTIVE REARMINGSLOW FLASHING = ARMED OFF = DISARMED ON SOLID = VALET MODE 3 FLASH...PAUSE = INTRUSION ZONE 3 2 FLASH...PAUSE = INTRUSION ZONE 2 1 FLASH...PAUSE = INTRUSION ZONE 1 SIREN...