AT&T TR1909W - Manuals

1 Product overview This AT&T TR1909 Trimline® telephone with caller ID/call waiting can be used either in desktop or wall mount position, and requires four AA alkaline batteries (not included) for all functions. The telephone can still operate with limited features when there are no batteries in...

Getting started 2 3 Handset layout OPTION/SELECT Press to display the setting options.While in the option menu, press to save the selection and move to the next feature (page 12).While reviewing the call log, press repeatedly to show different dialing formats (page 26). FLASH When there is a call wa...

Getting started 4 5 Screen display messages Screen icons The telephone line cord is not plugged into the wall jack.The telephone or another telephone on the same line is in use. • • LOW The battery power is low. CALL# Call number in the call log. NEW The call is new and has not been reviewed. REP Re...

4 5 Getting started For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111 . In Canada, dial 1 (866) 288-4268 . CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully...

Getting started 6 7 Before using the telephone, install four good AA alkaline batteries (not included) to provide memory backup, and to enable features such as caller ID and the IN USE light. If good batteries are not installed, the display only works when you lift the handset. When operating in thi...

Getting started 8 9 If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone lines, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Pl...

8 9 Getting started Wall installation Your telephone base is ready for desktop use. If you want to mount your telephone on a wall, use the provided mounting bracket to connect with a standard dual-stud telephone wall mounting plate. If you do not have this mounting plate, you can purchase one from m...

Getting started 10 11 Wall installation Rotate the bracket 180 degrees to the wall mounting position. Push the bracket upwards as shown until it clicks into place. 3. Route the telephone line cord through the slot as shown and plug the other end of the cord into a telephone wall jack. To mount the t...

10 11 Getting started Switching from wall installation to desktop To return the bracket from wall mount position to desktop use, follow the instructions below: Remove the telephone base from the mounting plate. Unplug the telephone line cord from the telephone wall jack and remove the cord from the ...

12 13 The table on page 13 provides a summary of the feature menu. Use the instructions below to change the setting in the menu: When the telephone is idle, press OPTION/ SELECT repeatedly until the screen displays the desired feature.Press or until the screen displays the desired setting.Press OPTI...

12 13 Telephone settings Default settings are indicated by an asterisk (*). Screen display Function Options SET CONTRAST Adjust the screen brightness to a comfortable level, from 1 (lightest) to 5 (darkest). The contrast may be different for desktop and wall mount installation. 1, 2, 3*, 4, 5 HOME A...

14 Telephone settings 15 HOME AREA CODE? HAC - _ _ _ Contrast This feature allows you to adjust the screen contrast level for different lighting conditions. Press OPTION/ SELECT repeatedly until the screen displays SET CONTRAST . Press or to select the desired screen contrast level from 1 (lightest)...

14 15 Telephone settings Repeat steps 2 and 3 for the second and third digits of your home area code.Press OPTION /SELECT to save the home area code and continue to set the local area code. Local area codes Local area codes are area codes associated with other telephone numbers for which you must di...

18 19 Basic telephone operation Make and answer a call To make a call: Lift the handset and wait for a dial tone.Use the dialing keys to enter the number you want to dial.Place the handset on the telephone base to hang up. To answer a call: Lift the handset.Place the handset on the telephone base to...

18 19 Telephone operation Options while on calls Flash If you subscribe to call waiting service from your local telephone service provider (see About caller ID on page 23), you hear a beep if someone calls while you are already on a call. Press FLASH on the handset to put your current call on hold a...

20 21 This telephone has 13 memory locations with three one-touch memory location keys ( M1 , M2 , M3 ) and 10 speed dial memory locations ( 0 through 9 ). Each location can hold a number up to 32 digits. To store a number in a one-touch memory location Follow the steps below to store a number in a ...

20 21 Telephone memory To review a number in a one-touch memory location To review a number in a one-touch memory location, lift the handset and hold down the switch hook on the handset, then press a one-touch key ( M1 , M2 or M3 ). The number stored in the one-touch memory location is displayed on ...

22 23 CALL#NEWREP 01 10 : 03 AM 12/01 800-222-3111 CHARLIE JOHNSON About caller ID This product supports caller ID services that most local telephone service providers offer. There is a fee for this service, and it might not be available in all areas. Caller ID with call waiting lets you see the nam...

24 Caller ID operation 25 This telephone deletes the earliest entry when the log is full to make room for new calls. The call log stores information about the last 80 incoming calls. NOTES: The caller’s name (up to 16 characters) is sent by your telephone service provider if you subscribe to caller ...

24 25 Caller ID operation To review the call log You can access the call log while the handset is lifted or on the base. Press or to access the call list and display the latest caller ID entry.Press repeatedly to scroll through the call list, which is in reverse chronological order (from the newest ...

26 Caller ID operation 27 To dial the displayed number To dial a call log number currently displayed, follow the steps below: Press DISPLAY DIAL . The screen displays LIFT RECEIVER . - OR - Press OPTION /SELECT repeatedly to display different dialing options for local and long distance numbers. When...

26 27 Caller ID operation 10 : 03 AM 12/01 REMOvE ALL? 10 : 03 AM 12/01 -END OF LIST- Copying a call log entry into memory When you are reviewing call log entries, you can copy the displayed telephone number to a one-touch or speed dial memory location. Lift the handset.Press or to scroll to your de...

28 29 If you have difficulty with your telephone, please try the suggestions below. For customer service, visit our website at www.telephones.att.com or call 1 (800) 222-3111 . In Canada, dial 1 (866) 288-4268 . There is no dial tone. Inspect the telephone line cord connection at the telephone wall ...

30 31 Appendix General product care To keep your telephone working well and looking good, follow these guidelines: Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps).DO NOT expose it to direct sunlight or moisture.Avoid drop...

32 33 Appendix If this equipment was approved for connection to the telephone network prior to July 23, 2001, it complies with Part 68 of the Federal Communications Commission (FCC) rules. If the equipment was approved after that date, it complies with the Part 68 rules and with the Technical Requir...

34 35 Appendix The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to: In the United States of America, call 1 (800) 222-3111 or visit www.telephones.att.com . In Canada, dial 1 (866) 288-4268 . What does thi...

38 Appendix A Adjust ringer volume, 18Answer a call, 18 B Battery installation, 6 C Caller ID, 23Call list, 25Call log, 25CLEAR key, 2, 12Contrast, 14Copy into memory, 27 D Deleting call log entries, 27Dialing options, 26Dialing the displayed number, 26Directory card, 21DISPLAY DIAL key, 2, 26 F FCC...