AT&T TL760 - Manuals - manualsarea.com

Page 2 - Battery installation; . Press on both sides of the battery

Getting started Battery installation Install the battery as shown below. After installing the battery, you may be able to make and receive short calls. For optimal performance, charge the headset battery for at least six hours before use. When not in use, recharge the headset by returning it to the ...

Page 3 - Battery charging; IMPORTANT INFORMATION

2 Getting started Battery charging After installing the battery, charge the headset by placing it in the headset base as shown below. The headset ON/OFF light will be on when the headset is charging. IMPORTANT INFORMATION Use only the supplied rechargeable battery or replacement battery (model BT954...

Page 4 - Avoid placing the headset base too close to:; • Communication devices such as: television sets, VCRs, or other; Installation preparation; For customer service or product information, visit our website at

3 Getting started Avoid placing the headset base too close to: • Communication devices such as: television sets, VCRs, or other cordless telephones. • Excessive heat sources.• Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting. • Exce...

Page 5 - Headset base installation; If you purchased model TL76, see the TL7000; Optional accessories; Visit our website

4 Getting started Headset base installation IMPORTANT: If you purchased model TL76, see the TL7000 handset lifter manual for installation instructions. Optional accessories It is recommended that you install a handset lifter (model TL7000) and/or a dial pad (model TL760) with your headset. The follo...

Page 6 - If you purchased model TL76, or if you purchased; Cord labels

5 Getting started Headset base installation Installation optionsIMPORTANT: If you purchased model TL76, or if you purchased a model TL7000 handset lifter (purchased separately), follow the installation instructions in the TL7000 handset lifter manual and then proceed on page 0 of this quick start gu...

Page 7 - Before installing the headset base:

6 Getting started Headset base installation Before installing the headset base: Remove the rear bottom piece of the headset base by pushing it away from the base (as shown in Figure ). Install the headset base as shown on the following pages. After completing installation option or 2: Slide the rear...

Page 8 - Option 1: Headset base with corded or cordless phone; POWER; TEL WALL JACK

7 Getting started Headset base installation Option 1: Headset base with corded or cordless phone installation (TL7610) 1. Plug the small end of the headset base power adapter into the POWER jack (green dot) at the back of the headset base. 2. Plug one end of the telephone line cord into the TEL WALL...

Page 10 - Option 3: Headset base with corded phone for; With this installation, you can make and receive calls using the; LIFTER MODE

9 Getting started Headset base installation Option 3: Headset base with corded phone for multiple line system or digital business system installation (TL7610) With this installation, you can make and receive calls using the LIFTER MODE without a lifter. 1. Plug the small end of the headset base powe...

Page 11 - Quick reference guide - headset; VOLUME

0 Getting started Quick reference guide - headset ON/OFF Press to make and/or answer a call, and end a call.The light is on when the headset is charging in the headset base. The light flashes slowly when you are on a call or flashes quickly when there is an incoming call. VOLUME Press the volume key...

Page 12 - Quick reference guide - headset base; Charging cradle; PAIR; NO LIFTER MODE; LIFTER MODE light; MUTE light

Getting started For complete instructions, please refer to the user's manual. If you are unable to find your manual, please visit www.telephones.att.com to read and/or download the manual. Quick reference guide - headset base Charging cradle Insert the headset here for charging. PAIR Press to regist...

Page 13 - NO; LIFTER AUDIO ADJUST

2 Getting started VOLUME Press the volume keys on the side of the headset base to adjust the speaking volume when on a call. MODE Press to choose between the NO LIFTER MODE or LIFTER MODE when the headset is not in use. The corresponding light will come on. LIFTER AUDIO ADJUST Adjust the switch to c...