AT&T ISB7105 - Manuals - manualsarea.com

Page 3 - Contents

3 Contents Notice for Installers .......................................................................................................... 4 IMPORTANT SAFETY INSTRUCTIONS.............................................................................. 4 Change the Way You Watch TV .......................

Page 4 - Power Source Warning; IMPORTANT SAFETY INSTRUCTIONS

4 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in a c c o r d a n c e w i t h t h e m a n u f a c t u r e r ’ s instru...

Page 5 - IMPORTANT SAFETY INSTRUCTIONS,; continued

5 Ground the Product WARNING: Avoid electric shock and fire hazard! If this product connects to cable wiring, be sure the cable system is grounded (earthed). Grounding provides some protection against voltage surges and built-up static charges. Protect the Product from Lightning In addition to disco...

Page 8 - Front Panel

8 Front Panel 1 Power Turns the receiver on or places it in standby. To restart the receiver, press and hold the POWER button for 10 seconds. The LED is green 2 Model Number Identifi es the model number of your receiver as ISB7105 3 Signal Strength Identifi es the strength of the wireless connection...

Page 9 - Back Panel

9 Back Panel 1 Network Connect to the Ethernet (CAT-5) network at your home, if applicable 2 YPbPr Connect the receiver to the component video input (YPbPr) on the HDTV. See pages 13 and 14 for more information 3 Video Out Connect to composite input on your HDTV or SDTV 4 Audio Out (L/R) Connect RCA...

Page 10 - Connecting the Receiver; See pages; Home Theater

10 Because the connections for a high-defi nition (HD) or standard-defi nition (SD) TV are diff erent, you must determine if your TV is HD or SD. Your TV must receive HD signals for you to enjoy the benefi ts of HDTV. Refer to the manual that came with your TV for more information. See page 25 for m...

Page 11 - Receiver Operational Status; You must obtain three or more green bars at initial installation.; Signal Strength Indicator

11 ISB7105 Wireless NetworkConnection The ISB7105 receiver allows for easy and secure connection to IPTV services. The signal strength indicator on the front panel of the receiver identifi es the strength of the wireless connection and aids in the proper placement of the receiver. • The receiver mus...

Page 12 - Connecting the Wireless Access Point to the Gateway; Pairing the Wireless Access Point and Receiver; Power; Cable

12 Connecting the Wireless Access Point to the Gateway 1. Connect the 12 VDC Power Supply plug on the access point to the wall power outlet. Use only the power adapter provided with the product. 2. Connect the power plug to the power receptacle on the wireless access point. 3. Connect the supplied y...

Page 13 - one; Adapter Needed

13 Connecti ons f or a High-Defi nition TV (HDTV) To use the receiver with an HDTV, you must make one of the following connections to view the HD content. Refer to the owner’s manual for your TV and the cabling diagrams in this manual for more detailed connection information.Although all connections...

Page 14 - Connections f; When using the receiver with an SDTV, you must make

14 Connections f or a Standard-Defi nition TV (SDTV) When using the receiver with an SDTV, you must make one of the following connections to view content. Some SDTVs may not have all these connections. Refer to the owner’s manual for your TV and the cabling diagrams in this manual for more detailed ...

Page 15 - When using the receiver with a VCR or DVD recorder, you must make; Connections; VD R

15 Connections f or a VCR or DVD Recorder When using the receiver with a VCR or DVD recorder, you must make one of the following connections to view content. Although all connections provide you with quality service, we list the connections in our recommended order. Notes: • The labeling on your rec...

Page 16 - Cable Used in this Confi guration; • 1 HDMI Cable; connecting or disconnecting any device cables to the receiver.; Receiver; Back of HDTV

16 Connecti ng t o an HDTV with an HDMI Connector Cable Used in this Confi guration • 1 HDMI Cable Notes: • The HDMI port on the TV must support high-bandwidth digital content protection (HDCP). • The HDMI interface supports Dolby Digital 5.1 audio. WARNING: Electric shock hazard! Unplug all electro...

Page 17 - Cables Used in this Confi guration; OR

17 Connecti ng t o an H DTV with a DVI Connector Cables Used in this Confi guration • 1 HDMI-to-DVI Cable or 1 HDMI Cable and 1 HDMI-to-DVI Adapter • 1 Audio Left/Right Cable (You can also use an optical cable [indicated by the dotted line] instead of the Audio Left/Right Cable as shown in the diagr...

Page 18 - Back of

18 Connecti ng t o an H DTV with Component (YPbPr) Connectors Cables Used in this Confi guration • 1 Component Video Cable (YPbPr) • 1 Audio Left/Right Cable (You can also use an optical cable [indicated by the dotted line] instead of the Audio Left/Right Cable as shown in the diagram, dependent upo...

Page 19 - • 1 Audio Left/Right Cable; Back of SDTV

19 Connecti ng t o an SDTV with Component (YPbPr) Connectors Cables Used in this Confi guration • 1 Component Video Cable (YPbPr) • 1 Audio Left/Right Cable Note: The receiver must be set to the proper standard-defi nition mode. WARNING: Electric shock hazard! Unplug all electronic devices before co...

Page 20 - Connecting to an SDTV with an RCA-Type Connector; • 1 RCA-type Video Cable

20 Connecting to an SDTV with an RCA-Type Connector Cables Used in this Confi guration • 1 RCA-type Video Cable • 1 Audio Left/Right Cable WARNING: Electric shock hazard! Unplug all electronic devices before connecting or disconnecting any device cables to the receiver. Receiver T 1 5 8 8 2 NETWORK ...

Page 21 - connecting your other video and audio devices.

21 Connecting to a Home Theater System with Component (YPbPr) Connectors Cables Used in this Confi guration • 1 Component Video Cable (YPbPr) • 1 Audio Left/Right Cable (You can also use an optical cable [indicated by the dotted line] instead of the Audio Left/Right Cable as shown in the diagram.) N...

Page 22 - Connecting to a Stereo VCR or DVD Recorder (optional); Back of Stereo

22 Connecting to a Stereo VCR or DVD Recorder (optional) The diagram below shows how to connect a recording device to your receiver. Although it is possible to watch TV using a connection through your VCR or DVD recorder to the TV, this connection may not provide the best picture, and HDTV users are...

Page 23 - Troubleshooting; No Picture; Wireless Receiver Signal Strength; • Verify that you are able to receive wireless signal. See; No Color or Incorrect Color; completely and properly plugged into the receiver and TV.; No Sound; connected the device to the receiver.

23 Troubleshooting If the receiver does not perform as expected, the following tips may help. If you need further assistance, contact your service provider. No Picture • Verify that the power to your TV is turned on. • Verify that your wireless receiver and wireless access point are powered on.• Ver...

Page 24 - Frequently Asked Questions; What Is Digital Television?; the middle of the screen. There are bars surrounding the picture.; What Is HDMI and Does it Support Dolby Digital 5.1 Audio?

24 Frequently Asked Questions What Is Digital Television? Digital television (DTV) is a huge leap forward in television technology compared to analog television that has been widely available since the 1940s. DTV is delivered and displayed using digital encoding, similar to the way a PC operates. By...

Page 25 - Picture Formats; aspect ratio; What Is Aspect Ratio?; With the; progressive scanning; method, the lines are drawn on the screen one at a time; interlaced method; then the even lines.

25 Picture Formats What Is the Diff erence Between a Standard-Screen and aWide-Screen HDTV? The type of screen your HDTV has (wide-screen or standard-screen) determines how the receiver displays programs on the screen. The picture format for an HDTV is a combination of aspect ratio and screen resolu...

Page 26 - Index

26 A AC Power input 9 Arrow keys 8 Aspect ratio 24 Audio Out 9, 13, 14, 15 B Back panel 9 Burn-in of screen 23 Buttons See Front Panel C Cables 9, 12-23 CAT-5 See Ethernet Coaxial Cable Input 23 Compliance, FCC 28 Component video connection. See YPbPr Connectors See also Front panel; Back panel DVD ...

Page 27 - See

27 Index, continued K Keys. See Front panel N Network 9, 10, 11 O Optical Audio Output 9, 13, 17, 18, 21 Over-the-air converter box 15 P Picture formats 25 Ports. See Connectors Power 8, 9 Programs, view 24 Progressive screen resolution 25 R RGB connector 13, 23 S Safety 4, 5 Scan rates. See screen ...

Page 28 - United States FCC Compliance; FCC Declaration of Conformity; Compliance Information; Canada EMI Regulation

28 United States FCC Compliance This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against such interference in a residential installation. This equipment gener...

Page 29 - Federal Communication Commission Interference Statement; Industry Canada Statement:

29 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential i...