AT&T 9351 - Manuals

INSTALLATION 5 Wall Installation 1 Position the wall mount adapter on the base. 2 Connect the telephone line cord. 3 Connect the power cord. The ANSWER ON/OFF light goes on, and CL f lashes in the Message Window. Use only the power cord supplied with this product. If youneed a replacement, call 1 80...

TELEPHONE OPERATION 7 End a Call Place handset in base — OR — Press O . Exit programming. Cancel a page. Handset Volume Adjust volume ofwhat you hearthrough the handset. Make or Answer a Call Lift handset from base — OR — Press P and wait for light to go on steadily. Flash/Call Waiting Access specia...

TELEPHONE OPERATION 9 Temporary Tone Dialing If you have dial pulse (rotary) service, you can change from dial pulse totouch tone dialing during a call by pressing * . This is useful if you need to send touch tone signals for access to telephone banking or long-distanceservices. 1 Dial the number. 2...

TELEPHONE MEMORY 11 Store a Pause in a Memory Number Press to store a two-second pause in the dialing sequence. Each press adds another two- second pause and counts as one digit. Store MemoryNumbers 1 Make sure thehandset is off. 2 Press G . The PHONE light blinks. 3 Press the numberbutton (0–9) whe...

ANSWERING SYSTEM OPERATION AT THE BASE 12 Audible Indicators This system gives you voice prompts for feature operations and voiceconfirmations when you press a button or complete an operation. About Mailboxes This answering system has three voice mailboxes. Callers using a touchtone phone can select...

ANSWERING SYSTEM OPERATION AT THE BASE 13 Record Your Announcement NOTE: If you have assigned different mailboxes to different people, be sure to tell callers in your announcement to press # 1 , # 2 , or # 3 to leave a message in the appropriate mailbox. 1 Press U until you hear “Set Outgoing Messag...

ANSWERING SYSTEM OPERATION AT THE BASE 15 Listen To, Save & Delete Messages The system automatically saves your messages until you delete them,and can store approximately 15 minutes of messages, memos, andannouncements (up to a maximum of 99 messages). After playing a message, the system announc...

Call Screening/Intercept 1 Make sure the answering system is on, and set the message playbackvolume control above level 1 so you can hear the caller’s message. 2 If you decide to take the call, press P on the handset. 3 If you pick up an extension phone during the announcement and theannouncement do...

ANSWERING SYSTEM OPERATION AT TOUCH TONE PHONE 17 Connect with the Answering System You can access many features of this system remotely from a touch tonephone. 1 Dial your telephone number. 2 When the system answers, press # , then enter your Remote Access Code (preset to 19). The system beeps twic...

Remote Access Commands Function: Command: Play messages in Press # , then the appropriate mailbox a mailbox number ( 1 , 2 , or 3 ). The system plays new messages. If there are no newmessages, the system plays old messages. Repeat a message Press # 4 while message is playing; each press backs up ano...

BATTERIES 19 Charging the Handset Battery Pack This battery should remain charged up to six days with the ringer turnedon and up to twelve days with the ringer off. A fully charged batteryprovides an average talk time of about six hours. The battery pack needs charging when:• A new battery is instal...

20 Replacing the Handset Battery Pack 1 Remove the battery compartment cover on the handset by pressing on the indentation and sliding the cover downward. 2 Lift out the old battery pack and disconnect. 3 Align the two holes in the new battery pack’s plug with thesocket pins, and snap the plug into ...

BATTERIES 21 Spare Battery Charger This phone is equipped with a built-in spare battery charger in the baseunit. The spare battery charger allows you to always have a chargedbattery available should the handset battery charge become low. To install the spare battery pack (purchased separately, Repla...

IN CASE OF DIFFICULTY 22 If you have difficulty operating this phone, try the suggestions below.For Customer Service, visit our website at www.telephones.att.com or call 1 800 222–3111. Please retain your receipt as your proof of purchase . If the phone doesn’t work at all, check these items first: ...

IN CASE OF DIFFICULTY 23 If you hear noise or interference when using the phone: • Make sure the base antenna is fully upright. • You may be out of range. Move closer to the base. • Press and release C to change to another of the 30 channels available. If noise is exceptionally loud, move closer to ...

IN CASE OF DIFFICULTY 24 If you have difficulty hearing messages: Check the volume setting. If the system does not answer after the correct number of rings: • Make sure that the ANSWER ON/OFF light on the base is on. If it is off,press o . • If Toll Saver is on, the number of rings changes to two wh...