AT&T 8510T - Manuals

Kickstand Routing channel Line jack Adjunct jack Handset jack FCC Warning Bar Code label label Figure 2. 8510T Voice Terminal (Bottom View With Kickstand) The various components which appear on the bottom of the 8510T voice terminal are shown in Figure 2 and listed and explained below. Adjunct jack ...

What the Features Do Here are brief descriptions of the features which you can use with an ISDN 8510Tvoice terminal connected to a DEFINITY Communications System Generic 1 or Generic 3. The following descriptions include what each one does and how you mightwant to use it. The features in this sectio...

Message Retrieval Your Message light goes on to let you know that a caller has left a message. Follow your System’s message retrieval procedures to get your message. Mute Turns off the microphone associated with the handset or the speakerphone, whichever is currently active. Use when you want to con...

Lock Allows you to lock your Directory so that no one can make unauthorized changes in it; lock your Call Log so that no one else can view your Call Log entries;lock all of the softkeys so that no one can view or change any of the features accessedby the softkeys. Number of Names (on a Directory Pag...

Switch Features Abbreviated Dialing Allows you to store selected telephone numbers for quick and easy dialing. Each number can be a complete or partial voice terminal number, an extension number, or a trunk or feature code. There are 4 possible types of lists— personal, group, system, and enhanced—a...

Switch Features Since your 8510T voice terminal is connected to a DEFINITY CommunicationsSystem Generic 1 or Generic 3, you may be able to use some of the following features. Check with your System Manager to see which of these features have been assigned to your voice terminal. Special Instructions...

[ Feature ] Each of these boxes represents a button that has afeature assigned to it. The button is labeled with thefeature name. [handset tone] The tone that appears in brackets after a stepindicates what you should hear from your handset (orthe speakerphone, if appropriate) after successfullyperfo...

Abbreviated Dialing To program or reprograman outside number, extension, or feature code into a personal list 1 2 3 4 5 6 On a separate sheet of paper, jot down the outsidenumbers, extensions, and/or feature codes you wantto program as items on your personal list(s) (seeexample to the left) Note: Ea...

To place a call using a 1 Dial appropriate Abbreviated Dialing List code: personal, group, system, ● List 1 or enhanced list ● List 2 [dial tone] ● List 3 2 Dial desired list item (1, 2, 3...) ● Stored number is automatically dialed Automatic Callback To automatically placeanother call to anextensio...

Call Forwarding All Calls To temporarily redirectall calls to an extensionor outside numberof your choice 1 2 3 Press [ Call Forward ] or Dial Call Forward code [dial tone] Note: If you have console permission, you may next dial the extension number whose calls are to be forwarded. Dial extension or...

To retrieve parked call 1 from any extension 2 Dial Answer Back code [dial tone] Dial extension where call is parked [confirmation tone] Note: If you receive intercept tone, parked call has been disconnected or retrieved by someone else. Call Pickup To answer a call to a 1 Press [ Call Pickup ] memb...

Leave Word Calling To leave a message after 1 Press [ LWC ] before hanging up your handset dialing an extension [confirmation tone] (when your call is not answered, you hear ● Message light goes on at called voice terminal coverage or busy tone, or Note: If reorder tone is heard, message is not you ...

Priority Calling To place a priority call 1 Press [ Priority ] 2 3 or Dial Priority Calling code [dial tone] Dial extension Wait for called party to answer Send All Calls To send all incoming calls 1 Press [ Send All Calls ] (except priority calls) or Dial Send All Calls code immediately to coverage...

Voice Message Retrieval To retrieve your voice 1 messages when yourMessage light is on 2 3 4 Dial Voice Message Retrieval code [dial tone] Press [ # ] [voice prompting] Note: Do not press [ # ] if calling from someone else’s extension; instead, dial your own extension andyour security code, if requi...

Tones and Their Meanings Ringing tones are produced by an incoming call. Handset tones are those which you hear through the handset (receiver) or speakerphone. Ringing Tones ● 1 ring —A call from another extension. ● 2 rings —A call from outside or from the attendant. ● 3 rings —A priority call from...

Key Words to Know activate To begin or turn on the operation of a feature. attendant The person who handles incoming and outgoing calls at the main console. AUDIX Audio Information Exchange, an optional voice mail and message service that provides coverage for calls to you by recording callers’ mess...

System Manager The person responsible for specifying and managing the operation of features for all the voice and data equipment in your network. trunk A telecommunications channel between your DEFINITY Generic 1 or Generic 3 and the local or long distance calling network. Trunks of the same kindcon...

Quick Reference Lists Feature Codes F e a t u r e C o d e F e a t u r e Code ABBREVIATED DIALING List 1 List 2 List 3 P r o g r a m AUTOMATIC CALLBACK C a n c e l CALL FORWARDING ALL CALLS CALL PARK A n s w e r B a c k CALL PICKUP LEAVE WORD CALLING C a n c e l PRIORITY CALLING SEND ALL CALLS C a n ...