AT&T 360 - Manuals

5 TELEPHONE OPERATION Volume Control To adjust the listening level in the handset, set the volumecontrol on the left side of thehandset. Temporary Tone Dialing If you have dial pulse (rotary)service, you can change fromdial pulse to touch tonedialing during a call bypressing * . This is useful if yo...

7 TELEPHONE MEMORY Dialing Numbers inTelephone Memory For two touch dialing, lift the handset and press m and the number button (0-9)where the memory number is stored. Storing Numbers inTelephone Memory 1 Press and release P . 2 Enter the telephone number (up to 32 digits). 3 Press and release P . 4...

8 CALLER ID OPERATION Remove a call from call history Customize features Dial number displayed on screen Indicates repeatcaller Caller’s telephonenumber Caller’s name Date call wasreceived When on steadily, indicates phone on this line is in use. When flashing, indicates line is ringing Number of ne...

9 About Caller Identification This telephone is designed to store and display information about incomingcalls. It must be used with Caller Identification service provided by yourlocal telephone company; there is a fee for this service, and it may not beavailable in all areas. This phone can provide ...

10 Removing All Calls from Call History 1 Press C to enter the call history. 2 Press and release r for 1.5 seconds when no call is displayed. The screen displays REMOVE ALL CALLS? . 3 Press and release r for 1.5 seconds again to remove all calls. The screen displays END OF LIST . Display Dial As you...

11 Programming Area Codes In addition to programming your home area code (see Step 9 in INSTALLATION), you can program up to four other local area codes.These are area codes that do not require dialing a “1” before them.After programming, if you receive a call from one of these area codes,the screen...

Display Screen Messages Screen Displays: When: PRIVATE NAME The other party is blocking name information. PPP The other party is blocking telephone numberinformation. PRIVATE CALLER The other party is blocking name and numberinformation. UNKNOWN CALLER Your phone company is unable to receive informa...

14 RADIO/ALARM OPERATION Set separate alarms Silence alarm for about 10 minutes Select AM or FM Current radio station Set radio to automatically turn off Turn radio on or off Search for next clear radio station

15 Turning Radio On/Off Press I to turn the radio on or off. When you turn the radio on, the screen displays the currently selected station, band, and MHz or KHz.You can access Caller ID information while the radio is on. NOTE : If you receive a call while the radio is on, the screen will display Ca...

16 RADIO/ALARM OPERATION Setting Alarm Time You can set the alarm ( ALARM A ) or ( ALARM B ) to wake you with the radio or the buzzer. NOTE: To set the clock, see the INSTALLATION section of this manual. 1 Press and hold d for about one second. 2 Press and release a A — OR — Press and release a B . ...

17 If you have difficulty operating this phone, try the suggestions below.For Customer Service, visit our website at www.telephones.att.com or call 1 800 222–3111. Please retain your receipt as your proof of purchase . No Dial Tone • Make sure all plugs are connected properly. Inspect the line cord ...