ATD ATD-8696 - Manuals

Disassembly 1. Remove any external and/or internal lock rings. 2. Position the C-frame press around the drive shaft yoke, and tighten the forcing screw until the first bearing is removed. 3. Reposition the C-frame and remove the second bearing. Assembly 1. Clean all dirt and oil from the yoke area. ...

refer to Figure 3. 2. Tighten the forcing screw until the receiving tube contacts the control arm. Check the alignment of all tooling and components, and continue tightening the forcing screw until the ball joint is removed. Installation 1. Clean the control arm and coat the I.D. with a suitable lub...

Ite m# Orde ring Part# De scription 1 PRT8696-1 SCREW 2 PRT8696-2 BLOW MOLDED CASE 3 PRT8696-3 INSTALL ADAPTER 4 PRT8696-4 INSTALL CUP ADAPTER 5 PRT8696-5 RECEIVING CUP 6 PRT8696-6 1-3/4" x 2" RING 7 PRT8696-7 2-3/4" X 2-1/2" RING 8 PRT8696-8 2-1/4" X 3" RING 9 PRT8696-9 C-FR...