Asko T208C.W.AU - Manuals

6 • The dryer is made in compliance with all relevant safety standards. This dryer may be used by children aged 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, but only if they are supervised during the use of the appliance,...

7 DRYER DESCRIPTION 1. Main switch (ON/OFF) 2. Program selector knob 3. Display unit 4. Program selector buttons 5. Button (start/pause/stop) 6. Rating plate with information about the dryer (on the inside of the drying machine door) 7. QR and AUID code (on the inside of the drying machine door) 8. ...

8 PACKAGING Remove all packaging. Please sor t the materials in compliance with local recommendations (see chapter "DISPOSAL"). CLEANING Disconnect the dr yer from the power mains and open the door towards you. Clean the dr yer drum with a damp cloth and a mild detergent. No program can be s...

9 INSTALLATION AND CONNECTION DRYER PLACEMENT The dryer can be either free standing or installed onto a washing machine. The dryer emits heat. Therefore, do not place it in a very small room, as the drying process may be longer due to limited amount of available air. Do not place the dryer in a room...

10 Stacking on top of a washing machine To stack the dr yer on top of a washing machine, use the extra vacuum feet and the tipping guard (A+B), supplied in the cardboard box in the dr yer drum. Tipping gurad par t B is designed to fi t on ASKO washing machines and might be hard or imposible to mount...

12 CHANGING THE DOOR OPENING DIRECTION To change the direction of door opening, proceed as follows. 1 Open the door fully. 2 Undo the screws and remove the door. 3 Use the screwdriver to remove the door lock cover and undo the screw on the door lock. 4 Push the door lock upwards and remove it. Move ...

14 DRAINING THE CONDENSATE The moisture from the laundr y is extracted in the condenser unit and accumulated in the condensate tank. Condensate tank has to be emptied regularly (see chapter "CLEANING AND MAINTENANCE"). Interruption of the dr ying cycle due to full condensate tank can be avoi...

15 CONNECTING TO THE POWER MAINS After installation, the dr yer should stand still for two hours before it is connected to the power mains. Connect the appliance to an ear thed power outlet. After installation, the wall outlet should be freely accessible. The outlet should be fi tted with an ear th ...

16 This chapter includes several tips on how to prepare the laundr y from dr ying. LAUNDRY SORTING Sor t the laundr y according to: • type, • fabric thickness. For the most even dr ying, make sure the laundr y is made of a similar material. CLOTHING 1. Close the buttons, zips, and hook-and-loop fast...

17 MATERIALS (FABRICS) SUITABLE FOR DRYING IN A TUMBLE DRYER Material is suitable for tumble dr ying. Clothes dried in a tumble dr yer are softer and lighter than air-dried clothes. The dr yer does not cause any considerable wear of the fabric. The lint collected in the lint fi lter consists of dust...

18 DRYING PROCESS, STEP BY STEP (1 – 7) STEP 1: SORT THE FABRICS See chapter "TIPS BEFORE DRYING" STEP 2: TURN ON THE MAIN SWITCH. Turning on Press the on/off button. Turning off Press the on/off button. STEP 3: OPEN THE DRYER DOOR AND INSERT THE LAUNDRY. Open the dr yer door towards you. 1 ...

19 STEP 4: CHOOSE THE DRYING PROGRAM. Choose the program by rotating the program selector knob in either direction. The program selector knob can be used when arrows appear on the display. Select the program based on the type and remaining moisture of the laundr y you wish to dr y. Anticipated progr...

20 Program Max. kg Description 9. AIRING PROGRAM (Airing) 2 Use the airing program when you only wish to refresh, aerate, or soften your laundry. Program duration can be adjusted from 15 minutes to 3 hours (in 15-minute steps). 10. SYSTEM SETTINGS Use the program selector knob to select System Setti...

21 STEP 5: CHOOSING THE PROGRAM SETTINGS Using the program settings, the dr ying programs can be fur ther adjusted to your wishes. Some program settings may not be available for your selected program. Selected program settings will remain stored after the end of the dr ying cycle and may be changed ...

22 5. Timed drying First, use the program selector knob to select the Timed Dr y program. Press the button 5 to select a dr ying time from 30 minutes to 4 hours, in 15-minute steps. Time 2 OK 2:15 5 6 Use the button 6 (OK) to con fi rm the selected dr ying time. Press the Start / Pause/Stop button t...

23 STEP 6: CLOSE THE DOOR AND START THE DRYING PROCESS. Close the dr yer door and press the Start /Pause/Stop button. Star t (pressed brie fl y – star t /resume) Pause (pressed brie fl y – dr ying temporarily suspended) Stop (press and hold for 3 seconds – stop or cancel) Starting 2:20 Remaining tim...

24 STEP 7: END OF PROGRAM Cycle completed succsessfully new Start After the end of the dr ying program, the display will indicate that the program has been successfully completed ("Cycle completed successfully"). Cycle completed succsessfully Anti creasing If you have selected the "anti-...

25 Favourite programs Cycle completed succsessfully fav Add new Start 6 After the end of the dr ying program, you can use the button 6 to store the program, including all extra settings, as your favourite program. Make your list of four own favourite programs. Up to 4 favourite programs can be store...

26 SYSTEM SETTINGS Enter System settings 2 In the main menu, use the program selector knob to select System Settings. Con fi rm the selection by pressing the button 2. Then, use the program selector knob to scroll the list of settings that can be changed. • Child Lock • Language • Programs • Display...

27 PROGRAMS The main menu includes the entire set of programs that you can choose using the program selector knob. This setting allows only displaying the selected program in the main menu. Sports wear Programs Back Info 1 3 6 Press the button 1 for to appear. Use the program selector knob or the bu...

28 RESET This means that all settings will return to the default settings and your own settings will be deleted. Reset Back Info Yes 3 6 Con fi rm the selection by pressing the button 3 (YES). Press the button 6 to return to System Settings. NOISES In the initial stage of dr ying or during dr ying, ...

29 CLEANING AND MAINTENANCE CLEANING THE NET FILTER IN THE DOOR 1 Open the fi lter housing. 2 Pull out the net fi lter. 3 Gently scrape the fi lter to remove the lint lining ( fi bres and threads). 4 Replace the net fi lter. 5 Close the fi lter housing. Make sure the net fi lter is correctly inser t...

30 EMPTYING THE CONDENSATE TANK After each dr ying cycle, empty the condensate tank. If the condensate tank is over fl owing the dr ying program will be paused automatically. A warning will appear on the display unit that the condensate tank has to be emptied. 1 Pull out the condensate tank from the...

31 CLEANING OF WATER CONDENSER Clean the condenser when warning indicate on the display. Before cleaning, make sure to switch o ff the appliance and disconnect it from the power mains (unplug the power cord from the outlet). 1 During cleaning, some water may be spilled. It is therefore recommended to...

33 ADDITIONAL INFORMATION REGARDING CLEANING If you have inadver tently removed the entire net fi lter housing in the dr yer door, replace it in the same position. Opening on the lower side of the door should occasionally be cleaned with a vacuum cleaner. If necessar y, clean the fi lter housing and...

34 CLEANING THE APPLIANCE EXTERIOR Wipe the dr yer exterior using a soft damp cotton cloth and mild detergent. Do not use any cleaning agents that could damage the dr yer (please obser ve the recommendations and warnings provided by the manufacturers of the cleaning agents). Wipe all par ts of the d...

36 Problem/error Cause What to do? Unevenly dried laundry. • Laundry of varying types and thickness, and excessive amount of laundry. • Make sure you have sorted the laundry by type and thickness, whether you have added a suitable amount of laundry to the drum, and whether you have selected a suitab...

37 INFORMATION before, during, and after the program (depending on the model) Error indication on the display What to do? EN: STEAM TANK IS EMPTY. PLEASE FILL WATER Fill the condensate tank with water. Pour the water through the filter tank of the steam generator in the condensate tank housing. EN: ...

38 SERVICING BEFORE CALLING A SERVICE TECHNICIAN See the chapters "TROUBLESHOOTING and "CLEANING AND MAINTENANCE" and see if you can resolve the problem yourself. When you contact a ser vice centre, please state the model (1), type (2), and serial number (3) of your dr yer. Model, type, ...

40 PROGRAM TABLE The following table lists the power consumption and duration for several programs. The table shows the e ff ect on dr ying parameters at var ying spinning speeds during the washing cycle. Actual consumption can var y depending on the room temperature, humidity, load, changes in power...

41 Disposal / recycling of packaging Our product packaging is made of environmentally friendly materials that can be recycled, disposed of, or destroyed without any hazard to the environment. To this end, packaging materials are labelled appropriately. The symbol on the product or its packaging indi...

43 QUICK GUIDE 3. 2. 4. 6. 5. 7. 1. SORT THE FABRICS Sort the fabric by type and by how heavily soiled the laundry is. Observe the drying symbols on the laundry labels. Close the zippers, hook-and-loop fasteners and buttons. SWITCH ON THE MAIN ON/OFF SWITCH ( ON/OFF ) OPEN THE DRYER DOOR AND INSERT ...