Asko T608HX - User Manual

6 • Do not let children younger than three years to come near the dryer, unless they are under constant supervision. • The dryer is made in compliance with all relevant safety standards. This dryer may be used by children aged 8 years and above and by persons with reduced physical, sensory or mental...

7 1. Main switch (ON/OFF) 2. Program selector knob 3. Display unit 4. Program selector buttons 5. Button (start/pause) 6. Rating plate with information about the dryer (on the inside of the drying machine door) 7. QR and AUID code (on the inside of the drying machine door) 8. Dryer door 9. Door net ...

8 PACKAGING Remove all packaging. Please sor t the materials in compliance with local recommendations (see chapter "DISPOSAL"). CLEANING Disconnect the dr yer from the power mains and open the door towards you. Before using the dr yer for the fi rst time, clean the dr yer drum using a soft d...

10 INSTALLATION AND CONNECTION After installation, wait for 24 hours without moving the appliance before using it for the fi rst time. If the dr yer has to be laid down on one of the sides during transpor t or ser vicing, place it with its left side, viewing from the appliance front, downwards. 90° ...

13 CHANGING THE DOOR OPENING DIRECTION To change the direction of door opening, proceed as follows. 1 Open the door fully. 2 Undo the screws and remove the door. 3 Use a screwdriver to remove the door lock cover and undo the screw on the door lock. 4 Push the door lock upwards and remove it. Move it...

15 BUILT-IN ASKO dr yers can be installed beneath a cabinet or worktop with a minimum height of 864 mm. There must be a gap of about 12 mm all around the machine and a minimum gap of 25 mm between the rear edge of the machine top panel and the back wall. The opening width must be at least 622 mm. Th...

16 DRAINING THE CONDENSATE The moisture from the laundr y is extracted in the condenser unit and accumulated in the condensate tank. Condensate tank has to be emptied regularly (see chapter "CLEANING AND MAINTENANCE"). To simpli fi ed and avoid emptying and interruption of the dr ying cycle ...

17 CONNECTING TO THE POWER MAINS After installation, the dr yer should stand still for two hours before it is connected to the power mains. Connect the appliance to an ear thed power outlet. After installation, the wall outlet should be freely accessible. The outlet should be fi tted with an ear th ...

19 Laundry care plinth Thanks to the stainless steel plinth, your appliance will be raised by 30 cm, which makes loading and unloading of laundr y easier. *AVAILABILITY DEPENDING ON MARKET DENOMINATION ART. No. IRONING BOARD HI1153 White 576552 IRONING BOARD HI1153 Stainless steel 732756 IRONING BOA...

20 This chapter includes several advices on how to prepare the laundr y from dr ying. LAUNDRY SORTING Sor t the laundr y according to: • type, • fabric thickness. For the most even dr ying, make sure the laundr y is made of a similar material. CLOTHING 1. Close the buttons, zips, and hook-and-loop f...

21 MATERIALS (FABRICS) SUITABLE FOR DRYING IN A TUMBLE DRYER Material is suitable for tumble dr ying. Clothes dried in a tumble dr yer will be softer and lighter than air-dried clothes. The dr yer does not cause any considerable wear of the fabric. The lint collected in the lint fi lter consists of ...

22 DRYING PROCESS, STEP BY STEP (1 – 7) STEP 1: SORT THE FABRICS See chapter "ADVICES BEFORE DRYING" STEP 2: TURN ON THE MAIN SWITCH. Turning on / Turning off Press the on/off button. STEP 3: OPEN THE DRYER DOOR AND INSERT THE LAUNDRY. Open the dr yer door towards you. 1 2 3 Place the laundr...

23 STEP 4: CHOOSE THE DRYING PROGRAM. Choose the program by rotating the program selector knob in either direction. Con fi rm the program selection by pressing the button under the program. Select the program based on the type and remaining moisture of the laundr y you wish to dr y. Anticipated prog...

25 STEP 5: CHOOSING THE PROGRAM SETTINGS Using the program settings, the dr ying programs can be fur ther adjusted to your wishes. Some program settings may not be available for your selected program. Selected program settings will remain stored after the end of the dr ying cycle and may be changed ...

27 Favourite programs /Add to fav? Wash dried Add to fav Start new Good ECO performance Auto extra 6 After the end of the dr ying program, you can use the button 6 to store the program, including all extra settings, as your favourite program. (Empty) (Empty) (Empty) (Empty) (Empty) (Empty) Save Prog...

28 STEP 6: CLOSE THE DOOR AND START THE DRYING PROCESS. Close the dr yer door and press the Start /Pause button. Star t (pressed brie fl y – star t /resume) Pause (pressed brie fl y – dr ying temporarily suspended) Cancel (press and hold the button for 3 seconds) 00:26 Starting Auto extra Dr ying pr...

30 STEP 7: END OF PROGRAM 00:00 Drying finished Auto extra After the end of the dr ying program, the display will indicate that the dr ying has been fi nished ("Dr ying Finished"). Anti crease Drying finished Auto extra If you have selected the "anti-crease" option, the dr yer will c...

31 SETTINGS Program Program Quick pro Time program Airing Settings Sports wear Settings Conditioning 6 In the main menu, use the program selector knob to select Settings. Con fi rm the selection by pressing the button 6. Then, use the program selector knob to scroll the list of settings that can be ...

32 SET LANGUAGE Set language to: GB English You can choose between 24 languages. Press the button . Use the program selector knob to scroll the list of languages. Con fi rm selection with button under chosen language. Use the button to return to Settings. SOUNDS SETTINGS Sound volume You may choose ...

33 CUSTOMIZE FAVORITES AND PROGRAMS The main menu includes the entire set of programs that you can choose using the program selector knob. This setting allows only displaying the selected program in the main menu. Auto iron Auto jeans Auto synth Auto extra Auto Auto normal Use the program selector k...

34 CLEANING AND MAINTENANCE Before cleaning, make sure to switch o ff the appliance and disconnect it from the power mains (unplug the power cord from the outlet). CLEANING THE DOOR NET FILTER IN THE DOOR 1 Open the fi lter housing. 2 Pull out the net fi lter. 3 Gently scrape the fi lter to remove th...

35 EMPTYING THE CONDENSATE TANK After each dr ying cycle, empty the condensate tank. If the condensate tank is over fl owing the dr ying program will be paused automatically. A warning will appear on the display unit that the condensate tank has to be emptied. (Disregard this warning if you fed the ...

36 CLEANING THE HEAT PUMP FILTER Do not touch the inner metal par ts of the heat exchanger with bare hands. Danger of injur y on sharp par ts. Use appropriate protection gloves when cleaning the heat exchanger. Incorrect cleaning of the metal fi ns of the heat exchanger can permanently damage the tu...

38 CLEANING THE STEAM GENERATOR TANK FILTER Each time you empty the condensate tank, clean the steam generator tank fi lter as well. The fi lter is located in the tank housing (visible when the condensate tank is removed). 1 Remove the condensate tank. 2 Remove the fi lter from the slot in the conde...

39 EMPTYING THE STEAM GENERATOR TANK Before transpor ting a dr yer that has been previously used, the steam generator tank must also be emptied. Otherwise, water from the tank may spill into the dr yer interior. 1 Move the dr yer approximately 40 cm away from the wall and tilt it backwards. 2 The st...

40 ADDITIONAL INFORMATION REGARDING CLEANING If you have inadver tently removed the entire net fi lter housing in the dr yer door, reinstall it in the same position. Opening on the lower side of the door should occasionally be cleaned with a vacuum cleaner. If necessar y, clean the fi lter housing a...

41 CLEANING THE APPLIANCE EXTERIOR Clean the appliance exterior and the display unit using a soft damp cotton cloth and water. Do not use solvents or abrasive cleaners that could damage the appliance (please obser ve the recommendations and warnings provided by the manufacturers of the cleaning agen...

44 FAILURE DISPLAY In case of a failure while a program is in progress, the relevant Error X is indicated on the display unit. Error Error 3 Info 5 Press and hold the INFO button to display the error description. Switch o ff the dr yer and turn it back on. Errors indicated on the display unit (depend...

46 SERVICING BEFORE CALLING A SERVICE TECHNICIAN See the chapters "TROUBLESHOOTING and "CLEANING AND MAINTENANCE" and see if you can resolve the problem yourself. When you contact a ser vice centre, please state the model (1), type (2), and serial number (3) of your dr yer. Model, type, ...

47 TECHNICAL INFORMATION Information sheet pursuant to the Commission Regulation (EU) No. 392/2012 Model TD75.23XX Max. drying capacity 8 kg (See rating plate) Energy efficiency class A+++ Annual energy consumption 176,80 (kWh/year) 1) Power consumption Automatic normal drying with maximum load (E d...

49 PROGRAM TABLE The table indicates the power consumption and time values for dr ying of a test batch of laundr y with various loads and after spinning at various rates, consistently with the EN61121. The following requirements apply to the consumption values speci fi ed below. Inlet air temperatur...

50 Program Amount Spinning speed (rpm) Powe r consu m ption, appro ximately (k W h ) * Pr ogr am dur ation, appr o ximately (h:min)* Conditioning 1000 0,30 0:40 Quick Pro 1400 0,50 0:59 Full load Partial load Small load * Due to deviations in terms of type and amount of laundry, spinning, power supp...

51 Disposal / recycling of packaging Our product packaging is made of environmentally friendly materials that can be recycled, disposed of, or destroyed without any hazard to the environment. To this end, packaging materials are labelled appropriately. The symbol on the product or its packaging indi...

55 QUICK GUIDE 3. 2. 4. 6. 5. 7. 1. SORT THE FABRICS Sort the fabric by type and by how heavily soiled the laundry is. Observe the drying symbols on the laundry labels. Close the zippers, hook-and-loop fasteners and buttons. SWITCH ON THE MAIN ON/OFF SWITCH ( ON/OFF ) OPEN THE DRYER DOOR AND INSERT ...

Gorenje, Par tizanska 12, 3320 Velenje, Slovenija www.asko.com TD75.23 SPHP GP en (08-21)