APC P D U - Manuals

Switched Rack PDU Installation and Quick-Start Manual 3 Install the Switched Rack PDU Installation guidelines • If the PDU is installed in an enclosed communications rack, the recommended maximum ambient temperature should be no greater than 45° C. • Install the PDU so that there is air flow to the ...

6 Switched Rack PDU Installation and Quick-Start Manual Quick Configuration Overview You must configure the following TCP/IP settings before the Switched Rack PDU can operate on a network: • IP address of the Switched Rack PDU• Subnet mask• Default gateway TCP/IP configuration methods Use one of the...

Quick Configuration 8 Switched Rack PDU Installation and Quick-Start Manual BOOTP. You can use an RFC951-compliant BOOTP server to configure the TCP/IP settings for the Switched Rack PDU. If the BOOTP server is properly configured, the Switched Rack PDU’s default setting ( DHCP & BOOTP ) for BOO...

Quick Configuration Switched Rack PDU Installation and Quick-Start Manual 9 DHCP. You can use a RFC2131/RFC2132-compliant DHCP server to configure the TCP/IP settings for the Switched Rack PDU. 1. The Switched Rack PDU sends a DHCP request that uses the following to identify itself:– Vendor Class Id...

Quick Configuration 10 Switched Rack PDU Installation and Quick-Start Manual Local access to the control console You can use a local computer to connect to the PDU to access the control console. 1. Select a serial port at the local computer, and disable any service which uses that port. 2. Use the c...

Quick Configuration Switched Rack PDU Installation and Quick-Start Manual 11 3. Use Telnet to access the Switched Rack PDU at its newly assigned IP address. For example: telnet 156.205.14.141 4. Use apc for both User Name and Password. 5. See “Control console” on this page to finish the configuratio...

12 Switched Rack PDU Installation and Quick-Start Manual How to Access a Configured Switched Rack PDU Overview After the Switched Rack PDU is running on your network, you can use several different interfaces to access the Switched Rack PDU. Web interface Use Microsoft ® Internet Explorer 5.0 (and hi...

Switched Rack PDU Installation and Quick-Start Manual 13 How to Recover From a Lost Password You can use a local computer that connects to the Switched Rack PDU through the serial port on the front of the unit. 1. Select a serial port at a local computer, and disable any service that uses the port. ...

14 Switched Rack PDU Installation and Quick-Start Manual How to Download Firmware Updates You can use a local computer that connects to the Switched Rack PDU through the serial port on the front of the unit. 1. Select a serial port at the local computer, and disable any service that uses that port. ...

Switched Rack PDU Installation and Quick-Start Manual 15 Warranty and Service Limited warranty APC warrants the Switched Rack PDU to be free from defects in materials and workmanship for a period of two years from the date of purchase. Its obligation under this warranty is limited to repairing or re...

16 Switched Rack PDU Installation and Quick-Start Manual Life-Support Policy General policy American Power Conversion (APC) does not recommend the use of any of its products in the following situations: • In life-support applications where failure or malfunction of the APC product can be reasonably ...

Radio Frequency Interference This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial e...

APC Worldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways: • Visit the APC Web site to find answers to frequently asked questions ( FAQ s), to access documents in the APC Knowledge Base, and to submit customer support req...