APC NBWL0355 - Manuals

NetBotz 355 Installation and Quick Configuration Manual 1 Introduction Product Description The American Power Conversion (APC ® ) NetBotz ® Room Monitor 355 functions as the central hardware appliance for a NetBotz security and environmental monitoring system. The NetBotz 355 can be installed anywhe...

2 NetBotz 355 Installation and Quick Configuration Manual Document Overview The NetBotz Room Monitor 355 Installation and Quick Configuration Manual describes how to install a NetBotz Room Monitor 355, how to connect devices to the appliance, and how to configure network settings. After performing t...

NetBotz 355 Installation and Quick Configuration Manual 3 Additional Options The following options are available for the NetBotz 355. For more information about any of the options, contact your APC representative or the distributor from whom you purchased your APC product. • Temperature Sensor (AP93...

4 NetBotz 355 Installation and Quick Configuration Manual Physical Description Front Item Description  Vented internal sensors Vented opening for airflow, temperature, and humidity sensors.  Network link LED Shows the status of the network connection. Blinks to indicate network traffic (green—conn...

NetBotz 355 Installation and Quick Configuration Manual 5 Rear Item Description  Sensor ports (4) Used for connecting APC sensors, third-party dry-contact sensors, and standard third-party 0-5 V sensors. Third-party dry-contact state sensors require the NetBotz Dry Contact Cable (NBES0304). Standar...

6 NetBotz 355 Installation and Quick Configuration Manual Inventory Inspect the contents of the package to ensure that the parts included match those shown below. Report missing or damaged contents to APC or your APC reseller. However, if damage was due to shipping, immediately report the damage to ...

8 NetBotz 355 Installation and Quick Configuration Manual Installation Install the NetBotz 355 Choose an installation option that meets your needs. Take the following into consideration: Caution: Only connect approved devices to ports on the NetBotz 355 as directed in this manual. Plugging in other ...

NetBotz 355 Installation and Quick Configuration Manual 9 Wall Note: Drill 4.76-mm (3/16-in) pilot holes for wall anchors. Caution: Do not overtighten the screws.

10 NetBotz 355 Installation and Quick Configuration Manual Ceiling

NetBotz 355 Installation and Quick Configuration Manual 11 Enclosure Note: Use a #32 drill to make four 2.94-mm (0.116-in) pilot holes.

12 NetBotz 355 Installation and Quick Configuration Manual Connect the NetBotz 355 to Your Network Power-over-Ethernet (PoE) injector Caution: Before you energize the NetBotz 355, review the electrical specifications on page 19 to avoid overloading the circuit. Caution: Be sure the appliance is prop...

NetBotz 355 Installation and Quick Configuration Manual 13 Connect Sensors to Sensor Ports This procedure applies to the following sensors, which are supported by the NetBotz 355 and connect to the sensor ports: • Temperature Sensor (AP9335T) • Temperature and Humidity Sensor (AP9335TH) • NetBotz Sp...

14 NetBotz 355 Installation and Quick Configuration Manual Adjust the Lens View the camera feed during the adjustment of the camera in order to correctly adjust the focus of the feed and field of view settings. To access the adjustment screws, remove the lens housing by turning the lens housing coun...

NetBotz 355 Installation and Quick Configuration Manual 15 Configure Your Appliance Overview This chapter explains how to set up your network settings and other configuration tasks. Gather Network Settings Information Collect the following information from your systems administrator. You will need t...

16 NetBotz 355 Installation and Quick Configuration Manual To Install on a Windows System To install the applications and the JRE on a supported Windows system: 1. Place the NetBotz Appliance Utility CD in the CD drive of the system that you will use to configure and manage your appliance. The NetBo...

NetBotz 355 Installation and Quick Configuration Manual 17 Root account user ID & password Your NetBotz 355 comes with a pre-configured root account. The root account is used only for appliance communications that are performed using the serial port, such as when you use the Serial Configuration...

18 NetBotz 355 Installation and Quick Configuration Manual Use the Serial Configuration Utility You can use the Serial Configuration Utility (installed during the Advanced View installation) to assign network settings to your appliance. To configure your appliance using the Serial Configuration Util...

NetBotz 355 Installation and Quick Configuration Manual 19 Clean the NetBotz 355 To clean the device, gently wipe surfaces with a clean, dry cloth. Specifications Electrical Input voltage, nominal 48 VDC (Power-over-Ethernet) Maximum power consumption 15 W Physical Dimensions (H x W x D) 210 x 170 x...

20 NetBotz 355 Installation and Quick Configuration Manual Warranty Two-Year Factory Warranty This warranty applies only to the products you purchase for your use in accordance with this manual. Terms of warranty APC warrants its products to be free from defects in materials and workmanship for a pe...

Radio Frequency Interference Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. USA — FCC This equipment has been tested and found to comply with the limits for a Class A digital device, purs...

APC Worldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways: • Visit the APC Web site to access documents in the APC Knowledge Base and to submit customer support requests. – www.apc.com (Corporate Headquarters) Connect to ...