APC NBPD0155 - Manuals

2 NetBotz Room Sensor Pod 155 Installation Manual Document overview The NetBotz Room Sensor Pod 155 Installation Manual describes how to install the NetBotz 155. For details on connecting the NetBotz 155 to your appliance, see the installation and quick configuration manual included with your applia...

NetBotz Room Sensor Pod 155 Installation Manual 3 Additional options The following options are available for the NetBotz 155. For more information about any of the options, contact your APC representative or the distributor from whom you purchased your APC product. • Temperature Sensor (AP9335T) • T...

4 NetBotz Room Sensor Pod 155 Installation Manual Physical Description Front Item Description  Temperature display • Displays the current temperature from 0 to 99 in Centigrade or Fahrenheit. The temperature reading is from the internal temperature sensor. If the temperature exceeds 99, the display...

NetBotz Room Sensor Pod 155 Installation Manual 5 Rear Item Description  Sensor ports Used for connecting APC sensors, third-party dry contact sensors, and standard third-party 0-5 V sensors. (See “Additional options” on page 3 for details on APC sensor options.) Third-party dry contact sensors req...

6 NetBotz Room Sensor Pod 155 Installation Manual Inventory Inspect the contents of the package to ensure that the parts included match those shown below. Report missing or damaged contents to APC or your APC reseller. However, if damage was due to shipping, immediately report the damage to the ship...

8 NetBotz Room Sensor Pod 155 Installation Manual Install the NetBotz 155 Choose an installation option that meets your needs. Then connect the NetBotz 155 to your appliance by following the instructions in the installation and quick configuration manual included with the appliance. Caution: Only co...

NetBotz Room Sensor Pod 155 Installation Manual 9 Wall options Note: Drill 4.76-mm (3/16-in) pilot holes for wall anchors. Caution: Do not overtighten the screws.

10 NetBotz Room Sensor Pod 155 Installation Manual Ceiling

NetBotz Room Sensor Pod 155 Installation Manual 11 Enclosure Note: Use a #32 drill to make four 2.94-mm (0.116-in) pilot holes.

12 NetBotz Room Sensor Pod 155 Installation Manual Connect Sensors Only connect sensors supported by the appliance to which the NetBotz 155 is connected. See the installation and quick configuration manual included with your appliance. Connect APC and third-party sensors to the four ports labeled Se...

NetBotz Room Sensor Pod 155 Installation Manual 13 Upgrades Firmware upgrades for NetBotz 155s are included with firmware upgrades for the NetBotz appliances. When you upgrade firmware for the appliance to which the NetBotz 155 is connected, the NetBotz 155 firmware will be updated automatically, if...

14 NetBotz Room Sensor Pod 155 Installation Manual Specifications Electrical Input voltage, nominal 24 VDC; 50-75 mA Maximum total current draw 75 mA Physical Dimensions (H x W x D) 146 x 135 x 38.5 mm (5.75 x 5.31 x 1.5 in) Weight 0.2 kg (0.4 lb) Shipping dimensions (H x W x D) 260 x 286 x 165 mm (...

NetBotz Room Sensor Pod 155 Installation Manual 15 Two-Year Factory Warranty This warranty applies only to the products you purchase for your use in accordance with this manual. Terms of warranty APC warrants its products to be free from defects in materials and workmanship for a period of two years...

Radio Frequency Interference Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. USA — FCC This equipment has been tested and found to comply with the limits for a Class A digital device, purs...

Australia and New Zealand Attention: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. European Union This product is in conformity with the protection requirements of EU Council Directive ...

APC Worldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways: • Visit the APC Web site to access documents in the APC Knowledge Base and to submit customer support requests. – www.apc.com (Corporate Headquarters) Connect to ...