APC CTEP0-120 - Manuals - manualsarea.com

Page 3 - Chapter 1 General Information; Safety; Changes and modifications to this unit not expressly; Do not work alone under hazardous conditions.; Batteries must be recycled.; Deliver the battery to an appropriate recycling

1 Chapter 1 General Information The CTEP/G Series Enclosures provide housing for a power source for broadband cable operations. Safety This Safety Guide contains important instructions that should be followed during installation and maintenance of the APC equipment and batteries. It is intended for ...

Page 4 - Chapter 2 Installation; Specifications; Models Supported; Model Number; Environmental Specifications; Operating Temperature; Physical Specifications; Characteristic Specification

2 Chapter 2 Installation Only trained service personnel should install and maintain the power supply enclosure. Prior to installing the power supply enclosure, a utility breaker box must be installed on the pole. Utility line voltage must be routed to the enclosure. Local, state, federal and/or Nati...

Page 5 - Pole Mount Installation; CTEP 0 Model

3 Unpacking Inspect the unit upon receipt. Notify the carrier if there is damage. The packaging is recyclable; save it for reuse or dispose of it properly. Check the package contents. The package contains the enclosure, battery cables, connectors and associated hardware and product documentation. CT...

Page 6 - CTEP6 Model; Ground Mount Installation; How to Contact APC

4 CTEP6 Model Ground Mount Installation 1. Install an APC approved concrete pad. Contact your dealer or see How to Contact APC , in this manual for more information. 2. Secure the enclosure to the pad. 0 Battery Enclosure: Attach the ground skirt to the concrete pad. Attach the enclosure to the grou...

Page 7 - Wiring; Grounding

5 Wiring Grounding 1. Install and interconnect ground rods appropriate for proper grounding according to local electrical code requirements. 2. Route ground wires from the ground system into the bus bar located on the enclosure. Connecting Utility Power to the Enclosure EP3 (EP6 has additional batte...

Page 8 - Options; Connecting the Batteries; Bottom Shelf

6 Options The CTEP/G6-120GI has an optional External AC Generator Interface. For available options see your dealer or the APC web site, www.apc.com/support . Connecting the Batteries The battery circuit breaker must OFF prior to battery installation. Use normal precautionary measures when wiring and...

Page 9 - Circuit Breaker

7 CTEP6 Bottom Shelf Middle Shelf Top Shelf CTSP Battery Connection Cables from Battery 3- and Circuit Breaker Circuit Breaker 34” Red to CTSP 25” Black to CTSP 60” Black to Circuit Beaker 27” Red to Circuit Breaker 40” Black to Battery 1- 60” Black to Battery 3+ 40” Black from Battery 6-

Page 10 - Chapter 3 Service, Contact and Warranty Information; Service; Support

8 Chapter 3 Service, Contact and Warranty Information Service APC makes every effort to ensure parts and equipment arrive in working condition. Occasionally, it may be necessary to return parts or equipment that are not in working condition. If the UPS requires service do not return it to the dealer...