Page 3 - Safety Information; Note
i Safety Information 1. Read this manual - Read all of the safety and operating instructions before installing and operating this device. 2. Keep this manual - Retain this manual, and all of the safety information that came with this device. 3. Warnings - Comply with all warnings presented in this m...
Page 4 - Overloading; Servicing; Damage Requiring Service; Replacement Parts; Periodic Inspection
ii Safety Information (continued) 14. Overloading - Do not overload the wall outlet where this device is being connected. Do not overload this device. Ensure the total load to this device doesnot exceed that which is listed in the Specifications section of this manual. 15. Servicing - There are no u...
Page 5 - Protect Your Investment; Safety Symbols
iii Registration Verification Confirmation By registering your purchase now, it guarantees you will receive all the information and special offers you qualify for as the owner of this product. By registering your purchase now, you have a way to confirm yourself as the owner of the product in the eve...
Page 7 - Top Panel Controls and Indicators 4
v Table of Contents Safety Information i Protect Your Investment iii Class B Labeling and Instruction Manual Requirements vi Introduction 1 Proven Expertise…Proven Reliability 1Safety Precautions 2Package Contents 2Unit Power Capacity 2 Features 3 Surge Protection 3Isolated Noise Filter Banks (INFB)...
Page 10 - Your C5 package should include the following items:; Unit Power Capacity
- 2 - Safety Precautions Please ensure you have read and understand all of the safety information located at the front of this manual. If you have any questions about the safety information, or are concerned that your home may not be properly wired for this equipment, please contact APC Technical Su...
Page 11 - Features; The following are major features of the Model C5:; Surge Protection; All outlets provide surge protection and noise filtering.
- 3 - Features The following are major features of the Model C5: Surge Protection The C5 Power Filter provides a high level of surge protection for the voltage going into the unit, thus protecting the devices connected to the unit. Additionally, surge protected coax/radio frequency (RF) connectors a...
Page 12 - Top Panel; Top Panel Controls and Indicators
- 4 - Top Panel The following section describes the controls and indicators on the top panel. Top Panel Controls and Indicators The top panel controls and indicators for the C5 Power Filter are detailed in Figure 2. Each numbered callout refers to the numbered description found immediately below the...
Page 14 - Outlet Panel and Side Panel; Outlet Panel
- 6 - Outlet Panel and Side Panel The following section describes the functionality of the outlet and side panels. Outlet Panel The outlet panel for the C5 Power Filter is deteailed in Figure 3. Each numbered callout refers to the numbered description found in the fol-lowing pages. Figure 3. C5 Outl...
Page 15 - Digital Filter Outlets; provides filtering of the incoming AC; : Any digital device can be plugged into the digital out-; Video Filter Outlets; provides filtering for your video devices; Analog Filter Outlets; provides filtering for your analog-; High Current Filter Outlets; provides filtering for your high-
- 7 - AC-Powered Outlets The C5 Power Filter provides for connection of up to ten (10) AC-powered devices. The outlets are arranged according to the type of filtering protection provided for a given applica-tion. These Isolated Noise Filter Banks eliminate electromag-netic and radio frequency interf...
Page 17 - When resetting the Circuit Breaker, push the; Surge Protected Telephone Jacks
- 9 - Surge Protected COAX/RF Connectors The C5 provides surge protection for your CATV system, Cable Modem, DSS, or Antenna system. The surge protection feature prevents surges traveling over Coaxial data lines from damaging the system. Connect the coaxial cable from the CATV or Cable Modem provide...
Page 18 - Installation; Make Connections; Due to the unique filtering and surge protection provided by the; Apply Power; Apply power to the C5 by pressing the front panel Power Switch (; Dimming of the C5 Display
- 10 - Installation The installation of the C5 consists of the following steps:1. Make connections2. Apply power Make Connections Prior to connecting equipment to the C5 Power Filter, ensure the unit is functional by connecting the AC Power Cord (provided) on the side panel ( , Figure 4). Once power...
Page 19 - Technical Specifications; Item
- 11 - Technical Specifications The following table contains the specifications for the C5 and C5BLK. Item Specification INPUT Input Voltage Range for Opera-tion (on utility) 92V - 140V Nominal Voltage 120 Vac Allowable Input Frequency for Operation (on utility) 40 - 70 Hz Rated Input Current 15 Amp...
Page 21 - Troubleshooting; Unit will not turn on.
- 13 - Troubleshooting This section describes possible causes and solutions for the following problems: • Unit will not turn on.• “Wiring OK Indicator” LED is not illuminated. Unit will not turn on. Probable Cause: Input power cord is not connected properly. Solution: Ensure supplied power cord is c...
Page 22 - “Wiring OK Indicator” LED is not illuminated.; There are 3 reasons why this LED would not be
- 14 - “Wiring OK Indicator” LED is not illuminated. Probable Cause: There are 3 reasons why this LED would not be illuminated:1. Reversed polarity exists at the wall outlet.2. Neutral wire is overloaded.3. Earth ground is missing at the wall outlet. Solution: Operating the unit under such condition...