Page 2 - Installation
Back-UPS Pro BR 1000/1350/1500 MS 2 Connect the Battery The UPS is shipped with the battery disconnected. Install PowerChute ™ Personal Edition Software Use PowerChute Personal Edition software to configure the UPS settings. During a power outage, PowerChute will save any open files on your computer...
Page 3 - Connect the Equipment; Battery Backup and Surge Protected outlets
Back-UPS Pro BR 1000/1350/1500 MS 3 Connect the Equipment Battery Backup and Surge Protected outlets When the Back-UPS is receiving input power, the Battery Backup with Surge Protection outlets will supply power to connected equipment. During a power outage or other AC problems, the Battery Backup o...
Page 4 - Operation; Power Saving Display
Back-UPS Pro BR 1000/1350/1500 MS 4 Operation Power Saving Display The display interface can be configured to be continuously illuminated, or to save energy, it can be configured to darken after a period of inactivity. 1. Full Time Mode: Press and hold DISPLAY for two seconds. The display will illum...
Page 5 - Front Panel Buttons and Display Interface; Front panel
Back-UPS Pro BR 1000/1350/1500 MS 5 Front Panel Buttons and Display Interface Use the three buttons on the front panel of the Back-UPS and the display interface to configure the Back-UPS. Front panel Display button Power On/Off button Mute button Display interface USB charging ports: The 2...
Page 6 - Alarms and System Errors; Audible Indicators; MUTE
Back-UPS Pro BR 1000/1350/1500 MS 6 Alarms and System Errors Audible Indicators Status Icons Mute: If the line through the speaker icon is illuminated, the audible alarm has been turned off. Out: Output voltage, frequency In: Input voltage. Automatic Voltage Regulation: When illuminated, the Back-UP...
Page 7 - System Errors; SEIT Technical Support.
Back-UPS Pro BR 1000/1350/1500 MS 7 System Errors The Back-UPS will display these error messages. Except for errors F01 and F02, contact SEIT Technical Support. *1 : BR1500MS only F01 On-Battery Overload Turn the Back-UPS off. Disconnect non-essential equipment from the Battery Backup outlets and th...
Page 8 - Function Button Quick Reference
Back-UPS Pro BR 1000/1350/1500 MS 8 Function Button Quick Reference Function Button Timing (seconds) UPS Status Description Power Power On 0.2 Off Press P OWER to start receiving input AC power. If AC input power is not available, the Back-UPS will run on battery power. Power Off 2 On The Back-UPS i...
Page 9 - Troubleshooting; Problem
Back-UPS Pro BR 1000/1350/1500 MS 9 Troubleshooting Problem Possible Cause Corrective Action Back-UPS will not switch on. The Back-UPS is not connected to AC power. Ensure that the Back-UPS is securely connected to an AC outlet. The circuit breaker has been tripped. Disconnect non-essential equipmen...
Page 11 - Select models are ENERGY STAR; EMC Compliance; receiver is connected.
Back-UPS Pro BR 1000/1350/1500 MS 11 APC by Schneider Electric IT Customer Support Worldwide For country specific customer support, go to the APC by Schneider Electric Web site, www.apc.com. Select models are ENERGY STAR ® qualified. For more information on your specific model go to www.apc.com. Thi...
