APC AR8162ABLK - Manuals

Data Cable Partitions—Installation 2 Installing Data Cable Partitions Use the procedure in this section to install all of the Data Cable Partitions. You can install Data Cable Partitions on a NetShelter Enclosure or a PDU. 1. Squeeze the two sides of the Pass-through Data Cable Partition to insert t...

Data Cable Partitions—Installation 3 Seismic environments Note: For installations in environments with seismic requirements, install cage nuts and screws (provided with enclosure) in the holes on the roof that are aligned with the holes on the partition. ns 13 50 a

Data Cable Partitions—Installation 4 Bonding Data Cable Partitions and ladders To bond NetShelter Data Cable Partitions to one another: 1. Attach one end of an 8-in ground wire  to a ground stud on the partition and secure the ground wire with two M6 washers  and an M6 nut  as shown. 2. Connect t...