APC AP9627 - Manuals - manualsarea.com

Page 3 - Introduction; The APC; Unpacking; Read the Safety Guide before installation.; Check the package contents:; Environmental Specifications; Temperature

APC Step-Down Transformer User Manual 3 Introduction Introduction The APC ® step-down transformers are used to convert a higher input voltage (208-200 V) to a lower output voltage (120-100 V) which might be more fitting for certain environments or system configurations. Note: Illustrations in this d...

Page 4 - Electrical Specifications; transferring to bypass mode.

4 APC Step-Down Transformer User Manual Introduction Electrical Specifications Attention: • Operation above the input voltage range may cause equipment damage. • Operation below the input voltage range may cause overload or automatic shutdown. When connecting directly to a branch circuit, check that...

Page 5 - Rack Installation; Install the Rails; Attention: Install the transformer directly above the UPS.; same; time as the brackets.

APC Step-Down Transformer User Manual 5 Rack Installation Rack Installation Install the Rails For details on support rail installation, refer to the instructions in the rail kit. Install the Transformer Attention: Install the transformer directly above the UPS. Install the bezel and bracket componen...

Page 6 - Electrical Configuration; to utility power. For; optional; AP9626 hardwiring, follow wiring instructions below.; Hardwiring; Adhere to all local and national electrical codes.; models

6 APC Step-Down Transformer User Manual Electrical Configuration Electrical Configuration Attention: • The AP9626 and AP9627 models DO NOT require hardwiring. Use the attached cord to connect to utility power. For optional AP9626 hardwiring, follow wiring instructions below. Hardwiring Attention: • ...

Page 7 - Connecting Equipment and Power to the Transformer; Rear Panels; Wiring must be performed by a qualified electrician.

APC Step-Down Transformer User Manual 7 Connecting Equipment and Power to the Transformer Connecting Equipment and Power to the Transformer Rear Panels Start-Up Attention: • Wiring must be performed by a qualified electrician. • Adhere to all local and national electrical codes. • If the internal te...

Page 8 - Regulatory and Service Information; FCC Compliance Notice; Contact APC Customer Support through the APC Web site,

8 APC Step-Down Transformer User Manual Regulatory and Service Information Regulatory and Service Information FCC Compliance Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to prov...

Page 9 - Warranty and Contact Information; American Power Conversion Limited Two Year Factory Warranty

APC Step-Down Transformer User Manual 9 Warranty and Contact Information Warranty and Contact Information American Power Conversion Limited Two Year Factory Warranty ¹ The limited warranty provided by American Power Conversion (APC) in this Statement of Limited Factory Warranty applies only to produ...

Page 10 - APC Worldwide Customer Support; Global support searching APC Knowledge Base and using e-support.

10 APC Step-Down Transformer User Manual Warranty and Contact Information APC Worldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways: • Refer to the APC Web site to access documents in the APC Knowledge Base and to submit ...