APC AP9341 - Manuals

Temperature/Humidity Module 3 Front and Rear Panel Components Front panel Use the toolless mounting pegs on the front panel of the TH Module to install it in an APC rack or enclosure without using any U-spaces. Rear panel T /H Exp an sion Mo d ule aem 0051 a Item Description  24 VDC Input Provides ...

4 Temperature/Humidity Module Installation—TH Module You can install the TH Module in the front or the rear of the rack or enclosure, using either the rack-mount option, which uses 1 U of rack space, or the toolless peg-mount option, which uses no U-space (the toolless peg-mount option is available ...

Installation—TH Module Temperature/Humidity Module 5 4. Insert caged nuts (provided with the rack) on the vertical mounting rails above a number at the top of a U-space in your rack and below the same number at the bottom of the U-space. 5. Align the mounting holes of the brackets with the installed...

6 Temperature/Humidity Module Installation—Accessories Sensors Selecting a location for the sensor: Install the sensor in a location that represents the air to be monitored. Avoid placing the sensor anywhere that may affect the sensor reading, such as near windows, room entrances, air ducts, other h...

Installation—Accessories Temperature/Humidity Module 7 2. Thread a wire tie through the door holes, skipping one hole in the middle. If you have a temperature/humidity sensor, place the sensor in the middle of the wire tie, and pull the wire tie around a ridge on the sensor casing. If you have a tem...

Installation—Accessories 8 Temperature/Humidity Module 7. With the door fully open, thread the sensor cords through the opening in the front post of the rack. 8. Route the cords between the vertical support rail and the side panel. Each 13-ft (4-m) sensor cord may be extended to a maximum of 50 ft (...

Installation—Accessories Temperature/Humidity Module 9 Alarm beacon 1. Install the alarm beacon in a visible position either on the roof of the rack or inside the rack. 2. If you install the beacon on the roof, route its cable through the provided holes, as shown in the following illustration. 3. Pl...

Installation—Accessories 10 Temperature/Humidity Module Connecting TH Modules To connect the Main Module to the TH Module: 1. Connect the first TH Module to either port marked A-Link on the rear of the Main Module, using a standard CAT5 (or equivalent) Ethernet patch cable (APC part number 3827BK-10...

Installation—Accessories Temperature/Humidity Module 11 Setting unique identifier numbers Each TH Module should have its own unique identifier number, which is used in the Main Module’s interface to identify and configure this TH Module. Use the arrow button to the right of the Identifier # LED disp...

Installation—Accessories 12 Temperature/Humidity Module Additional TH Modules Add TH Modules to the Main Module to monitor additional racks. The Main Module can support a maximum of 32 TH Modules (with additional power supplies). Adding power supplies: To avoid communication problems, connect the TH...

Temperature/Humidity Module 13 Accessing a TH Module TH Module data automatically appears on the interface of the Main Module to which it is connected. Upgrading a TH Module When you upgrade the firmware of the Main Module, all TH Modules connected to it are also upgraded if a firmware upgrade is av...

14 Temperature/Humidity Module Specifications TH Module Electrical Input voltage, nominal 24 VDC; 50–175 mA Maximum total current draw 175 mA Physical Dimensions (H × W × D) 1.74 × 13.25 × 1.74 in (4.42 × 33.70 × 4.42 cm) Weight 1.50 lb (0.70 kg) Shipping weight 4.00 lb (1.80 kg) Shipping dimensions...

16 Temperature/Humidity Module Warranty Limited warranty APC warrants the Temperature/Humidity Module to be free from defects in materials and workmanship for a period of two years from the date of purchase. Its obligation under this warranty is limited to repairing or replacing, at its own sole opt...

Warranty Temperature/Humidity Module 17 4. Pack the unit carefully. The warranty does not cover damage sustained in transit. Enclose a letter with your name, address, RMA number and daytime phone number; a copy of the sales receipt; and a check as payment, if applicable. 5. Mark the RMA number clear...

18 Temperature/Humidity Module Life-Support Policy General policy American Power Conversion ( APC ) does not recommend the use of any of its products in the following situations: • In life-support applications where failure or malfunction of the APC product can be reasonably expected to cause failur...

Radio Frequency Interference Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. USA — FCC This equipment has been tested and found to comply with the limits for a Class A digital device, purs...

*990-2380A-001* APC Worldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways: • Visit the APC Web site to access documents in the APC Knowledge Base and to submit customer support requests.– www.apc.com (Corporate Headquarte...