Page 3 - UNPACKING AND CHECKS
3402230800/AC - 3 The Network Management Card & Modbus/Jbus (66123) is recommended for central UPSs protecting entire networks or for UPS units backing up critical loads. With the card installed, the UPS has its own IP address anduses the local computer capabilities to: ◗ Supply web pages (http ...
Page 4 - Orange LED: RS232 activity; MAC address
4 - 3402230800/AC . ETHERNET port Service port (Settings/Sensor) OVERVIEW INDICATIONS LED Colour Status Description ACT Green ◗ OFF ◗ ON ◗ Flashing ◗ Card not connected to network ◗ Card connected to network, but no activity ◗ Port is sending/receiving 100M Orange ◗ OFF ◗ ON ◗ Port operating at 10 M...
Page 5 - TM; IP SETTINGS
3402230800/AC - 5 The Network Management Card & Modbus/Jbus (66123) can be hot-plugged in MGE TM Galaxy TM 7000 equipped with a Minislot. It is not necessary to shutdown the UPS, disconnect the load or restart the UPS. ◗ Note the MAC address of the card before inserting it. ◗ Insert and secure t...
Page 6 - Your network is not equipped with a BOOTP/DHCP server
6 - 3402230800/AC The card is configured by default with this service enabled. No manual configuration is required.The IP parameters are automatically collected by the card. From the main configuration menu: (see above) ◗ Press the 2 key (Network configuration). ◗ Press the 1 key(Read Network settin...
Page 7 - ACCESS TO SUPERVISION
3402230800/AC - 7 To check whether the Network Management Card & Modbus/Jbus (66123) is operational after installation and configuration, proceed as follows. ◗ Run a browser ◗ Enter in the address bar: http://IP address/ (e.g. http://172.16.1.82/) ◗ The home page is displayed ◗ Set the time by c...
Page 8 - The Environment sensor is a; Jbus; UPS
8 - 3402230800/AC The Environment sensor is a Network Management Card & Modbus/Jbus option. The sensor remotely monitors the UPS environment by regularly measuring the temperature and humidity, andchecking the states of two external contacts. It can also send alarms (e-mail, SNMP trap) tripped b...
Page 9 - Polarity; Txd; Pin Function
3402230800/AC - 9 RS232 link configuration and connection RS485 link configuration and connection For proper operation, the polarity of EIA RS485 2-wire and 4-wire lines must be set at only one point and thelines terminated at the end. Polarity Normally, the master of the network sets the polarity o...
Page 10 - Link without polarity and without termination.; Link with termination.
10 - 3402230800/AC 2 wires connection Card settings of an intermediate cabinet Others settings SA1 SA2 SA1 OFF ON 1 8 SA2 OFF ON 1 8 SA2 SA2 SA2 SA1 SA1 SA1 5 L + 4 3 2 1 L - 5V Rp Ra Rp 0V Ra 0V Ra 0V L- L- L+ L+ L- L- L+ L+ 3 7 2 4 1 3 2 4 1 3 polarity connection if end of the line polarity transm...
Page 12 - Configuration of the JBUS/MODBUS communication parameters; MGEUPS; Connect the RS232 link to a
12 - 3402230800/AC Configuration of the JBUS/MODBUS communication parameters ◗ Use the cord supplied with the card ◗ Connect the card to a computer ◗ Use a terminal emulator such as HyperTerminal TM with these settings "Echo typed characters locally" option: disabled ◗ Check that UPS power i...
Page 13 - Through a web browser
3402230800/AC - 13 ◗ Press the 2 key (Modifiy Jbus settings) ◗ Press «Return» key to modify the Jbus settings * Hex format. ◗ Press the 0 key (Exit). ◗ Press the 0 key (Exit). ◗ Run a browser ◗ Enter in the address bar: http://IP address/ (e.g. http://172.16.1.82/) ◗ The home page is displayed ◗ Sel...
Page 15 - TECHNICAL CHARACTERISTICS; Physical characteristics
3402230800/AC - 15 TECHNICAL CHARACTERISTICS Physical characteristics Dimensions (W x D x H) 132 x 66 x 42 mm Weight 70 g RoHS 100% compatible Storage Storage temperature range -10°C to 70°C Ambient conditions Operating temperature range 0°C to 40°C Relative humidity 90% RH max. without condensation...
Page 16 - In compliance with European directives:; Federal Communication Commission (FCC) statement; digital device, pursuant to; ELECTROMAGNETIC COMPATIBILITY
3402230800/AC 990-3402230800AC When correctly installed and used in accordance with manufacturer instructions, the card complies with thefollowing standards: ◗ ITE (Information Technology Equipment) safety: IEC/EN 60950-1 2005 ◗ EMC: EN 61000-6-2 (2005), EN 61000-6-3 (2006), IEC/EN 62040-2 (2005) In...