APC 20-30 kVA 480V - Manuals

APC 20-30 kVA 480V – Manual in PDF format online.

Manuals:

Manual APC 20-30 kVA 480V

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - Battery Cable Landings; Bottom cable entry; Connecting Load to the PDU; Preparing to connect the load to the PDU(s); Connecting load to the 4-pole breaker

Smart-UPS® VT ISX w/transformer and PDU, 20-30 kVA, 480 V, Installation Top cable entry  Feed the input cables in conduits (not supplied) through the punched holes.  Run the cables in the side panel.  Guide the input cables through the punched holes in the bottom plate up to the cable landing.  ...

Page 3 - PDU output breaker ratings; Communication Cables; EPO (Emergency Power Off) switch wiring – pin; Connection of APC communication options –

Smart-UPS® VT ISX w/transformer and PDU, 20-30 kVA, 480 V, Installation Disconnecting the load from the PDU(s) To disconnect the load, set the applicable breaker to the OFF position. PDU output breaker ratings 5 Communication Cables Rear of unit Ambient temperature in front of unit ºC Nominal rating...

Page 4 - Specifications; Minimum breaker settings; Checklist

Smart-UPS® VT ISX w/transformer and PDU, 20-30 kVA, 480 V, Installation 6 Specifications Minimum breaker settings Note 1: the short-circuit level is indicated for the output value. UPS ratings 20 kVA 30 kVA Input voltage / Bypass voltage (V) per phase 480 480 Input current (nominal) (A) 25.5 36.8 In...

APC Manuals