American DJ Sonic Beam II - Manuals

2. The Sonic Beam II TM uses four DMX channels to operate; Channel 1 is mirror pan, channel 2 is mirror tilt, channel 3 is gobo/color, and channel 4 is shutter. 3. To run your fixture in DMX mode, plug in the fixture via the XLR connections to any standard DMX controller. - Follow the set-up specifi...

Listed below are a few common problems the user may encounter, with solutions. No light from the unit; 1. Check if the ‘Power On’ (red) LED is lit and the fan is running. If not, there is no main supply. 2. Check the fuse in the back panel. 3. Check if lamp is lit. The user should be able to see som...

The Sonic Beam II may be controlled by a wide range of controllers; ie. Show Designer™, DMX Operator,™ Scene Setter™ or by the Sonic Beam II/C basic controller. Sonic Beam II/C features: • Stand by (Black out) • Strobe • Slow Scan • 30 ft. cable © American DJ Supply ® - www.americandj.com - Sonic Be...

©American DJ Supply American DJ World Headquarters: 4295 Charter Street Los Angeles, CA 90058 USA Tel: 323-582-2650 / Fax: 323-582-2610 Web: www.americandj.com / E-mail: [email protected] © American DJ Supply ® - www.americandj.com - Sonic Beam II™ Instruction Manual Page 15 Sonic Beam II™ Specifi...