American DJ DJ Roller - Manual
American DJ DJ Roller – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Master/Slave Quick Start Stand Alone Mode
- Page 3 – DMX CHANNEL; ON
- Page 4 – Note: The remote control; This fixture will react with DMX operation. For best; D J R o l l e r TM; You may use the DJ Roller
- Page 5 – Always disconnect the units main power before performing
- Page 6 – customer
- Page 7 – ROTATION
- Page 8 – DJ RollerTM; or; * Operating voltage is preset at the factory.; Specifi cations and improvements in the design of; -YEAR LIMITED WARRANTY
User Instructions
American DJ
®
©
American DJ Supply
®
- www.americandj.com - DJ Roller™ Instruction Manual Page 2
Customer Support:
American DJ
®
provides a toll free customer support line, to provide set
up help and to answer any question should you encounter problems
during your set up or initial operation. You may also visit us on the web
at www.americandj.com for any comments or suggestions. For service
related issue please contact American DJ
®
. Service Hours are Monday
through Friday 9:00 a.m. to 5:00 p.m. Pacifi c Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2610
E-mail:
Warning!
To prevent or reduce the risk of electrical shock or fi re, do
not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
your nearest American DJ dealer.
PLEASE do not discard the shipping carton in the trash. Please
recycle when ever possible.
Safety Issues:
This unit may blow a fuse if the maximum allotted
load of 15 amps is reached. If the fuse needs replacement, always
replace the fuse with same exact type that was remove, unless
otherwise instructed by an authorized American DJ
®
service techni-
cian. Use of a different type fuse from that which is recommended may
cause fire or electric shock and will void the manufactures warranty.
D J R o l l e r ™
U n p a c k i n g
D J
R o l l e r ™
I n t ro d u c t i o n
Thank you for purchasing the DJ Roller™ by American DJ
®
. Every DJ
Roller™ has been thoroughly tested and has been shipped in perfect
operating condition. Carefully check the shipping carton for damage
that may have occurred during shipping. If the carton appears to be
damaged, carefully inspect your unit for any damage and be sure all
equipment necessary to operate the system has arrived intact. In the
event damage has been found or parts are missing, please contact our
toll free customer support number for further instructions. Please do not
return the unit to your dealer without fi rst contacting customer support.
American DJ
4295 Charter Street
Los Angeles, CA 90058
www.americandj.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
© American DJ Supply ® - www.americandj.com - DJ Roller™ Instruction Manual Page 4 © American DJ Supply ® - www.americandj.com - DJ Roller™ Instruction Manual Page 3 D J R o l l e r ™ Q u i c k S t a r t The DJ Roller™ features a bright 150 watt/500 hour lamp life halogen bulb with a separate gobo a...
Power Supply: Before plugging your unit in be sure the source volt- age in your area matches the required voltage for your American DJ ® DJ Roller.™ The American DJ ® DJ Roller ™ is available in a 120v and 220v version. Because line voltage may vary from venue to venue, you should be sure your unit ...
Page 13 “Master Slave Dip Switch Settings”).7. Please follow the chart on page 13 for all slave dipswitch settings. Note only one fixture may use the master units dip switch settings (see Page 13).8. After all the units settings have been set and are plugged in, adjust the sensitivity knob on the bo...
