American DJ XDM-352 - Manual
American DJ XDM-352 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – © American DJ® AUDIO Los Angeles, CA 90058 USA; Operating Determinations
- Page 3 – Functions
- Page 4 – Inputs and Outputs
- Page 5 – Replacing the Crossfader
User Instructions
X D M - 3 5 2
PREAMP MIXER
Thank you for purchasing this American DJ® product. The XDM-352 is ready to be used,
there is no assembly required. Please read the following instructions before installing
or using your new unit. The XDM-352 has a 2 year limited warranty!
C A U T I O N !
-
Keep this device away from rain and moisture!
Safety Instructions
Always plug in the power last. Make sure that the Power switch is set to the OFF position before connecting other devices
to the mixer.
Keep away from heaters and other heating sources!
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch on the mixer
immediately. The arising condensation of water might damage your device. Leave the device switched off until it has
reached room temperature.
Never put any liquids on the mixer or close to it. Should any liquid enter the device, disconnect from main power
immediately. Have the device checked by a qualified service technician before operating again. Any damage caused by
liquid entering the device is not subject to warranty!
Never let the AC cord come in contact with other cables! Handle the AC cord and all AC connections with particular care.
Make sure that the available voltage is not higher than stated on the AC voltage selector (25).
Before the device is switched on, all fader and volume controls should be set to 0 or minimum position.
Damages caused by manual modifications to the device or unauthorized operation by unqualified persons are not
subject to warranty.
There are no user serviceable parts inside the mixer. For maintenance and/or service, contact an authorized
American DJ® dealer.
© American DJ® AUDIO Los Angeles, CA 90058 USA
Specifications subject to change without notice. XDM-352 User Instructions page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
© American DJ® AUDIO Los Angeles, CA 90058 USA Specifications subject to change without notice. XDM-352 User Instructions page 2 Operating Determinations When installing this mixer, please make sure that the device is not exposed to extreme heat, moisture or dust! There shouldnot be any cables lying...
Functions © American DJ® AUDIO Los Angeles, CA 90058 USA Specifications subject to change without notice. XDM-352 User Instructions page 3 (1) POWER SWITCH(2) BASS/TREBLE CONTROL - Used to increase or decrease the LOWs and HIs of the input signal.(3) LINE/PHONO SWITCH - Used to select the input to b...
(14) MASTER LEVEL-DISPLAY - The display shows the signal level of the master output on the left and right jack. (15) BALANCE CONTROL - Used to adjust how much of the signal is sent to the left and right MASTER OUT jack (31).(16) STEREO/MONO SWITCH - Used to set the master output to mono or stereo. I...
