Page 3 - f you; Safety Training; BE TRAINED
In order to reduce accidents and enhance the safe operation of mowers, Alamo Industrial, in cooperationwith other industry manufacturers has developed the AEM/FEMA Industrial and Agricultural Mower SafetyPractices video and guide book. The video will familiarize and instruct mower-tractor operators ...
Page 4 - Alamo Industrial is willing to provide
Alamo Industrial is willing to provide one (1) AEM Mower Safety Practices Video Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety Video DVD Format – AEM/FEMA Mower Operator Safety Video Mower Operator’s Manual AEM Mower Operator’s Safety Manual Requester Name: Phone: Requester Address: Cit...
Page 5 - TABLE OF CONTENTS
TABLE OF CONTENTS SAFETY SECTION ...................................................................................................................................... 1-1 Safety Information ................................................................................................................
Page 7 - SAFETY
Page 8 - so safely and responsibly.; READ; the following Safety
Safety Section 1-2 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 A safe and careful operator is the best operator. Safety is of primary importance to the manufac-turer and should be to the owner/operator. Most accidents can be avoided by being aware ofyour equipment, your surroundings, and observi...
Page 11 - Make sure you abide by
Safety Section 1-5 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 WARNING! Transport only at safe speeds. Serious accidents and injuries can resultfrom operating this equipment at unsafe speeds. Understand the Tractorand Implement and how it handles before transporting on streets andhighways. Make ...
Page 15 - WORK AREA PREPARATION
Safety Section 1-9 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 It is the intention of this manual to inform owners and their operators of some of the dangers inherent in theuse of this epuipment. The machine is an effective, durable and simple tool and when used correctly willprovide satisfactor...
Page 20 - DECAL LOCATION
Safety Section 1-14 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 ITEM PART NO. QTY LEVEL DESCRIPTION 1 00769736 1 WARNING Use/Repair Shield & Guards 2 00769737 2 DANGER Cutting Blades/Thrown Objects 3 02925100 1 IMPORTANT Genuine Parts 4 02967827 1 DANGER Multi-Hazard 5 02967867 2 DANGER Safe...
Page 24 - FEDERAL LAWS AND REGULATIONS
Safety Section 1-18 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 This section is intended to explain in broad terms the concept and effect of federal laws and regulations concerningemployer and employee equipment operators. This section is not intended as a legal interpretation of the law andshou...
Page 25 - INTRODUCTION
Page 27 - MAKE EVERY DAY A HOLIDAY FROM ACCIDENTS!!; GENERAL INSTRUCTIONS
INTRODUCTION Introduction Section 2-3 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 MAKE EVERY DAY A HOLIDAY FROM ACCIDENTS!! DANGER! A signal word - DANGER, WARNING, or CAUTION - is used with the Safety Alert symbol. DANGER identifies the most serious hazards. WARNING! Safety signs with signal word WARN...
Page 29 - ASSEMBLY
Page 30 - INSTALLATION
ASSEMBLY Assembly Section 3-2 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 PRE-INSTALLATION Prior to installing the Girzzly on the carrier, check to make sure that the combination of carrier and Grizzly is correctand is as ordered. INSTALLATION The cutter requires a constant flow of hydraulic oil and mu...
Page 31 - HYDRAULIC SCHEMATIC
ASSEMBLY Assembly Section 3-3 © 2002 Alamo Group Inc. GRIZZLY 66 01/05 Note: This is a typical schematic only, refer to the drawing supplied with the machine you purchased for theappropriate detailed schematic. HYDRAULIC SCHEMATIC
Page 32 - ALTERNATE HYDRAULIC SCHEMATIC
ASSEMBLY Assembly Section 3-4 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 ALTERNATE HYDRAULIC SCHEMATIC
Page 35 - OPERATION
Page 37 - Start Up
OPERATION Operation Section 4-3 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 Two Blade Arm w/ Blades Disc w/ Cutter Bits Three Blade Rotary Disc Start Up Clear all personnel, except the operator, from the vicinity of the machine. With the Control Valve in the "OFF" position, start up the machine...
Page 38 - Normal Operation
OPERATION Operation Section 4-4 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 NOTE: Preform the following run-up check over grass if possible to avoid raising dust. Once the direction of rotation has been determined to be correct and the Control Valve notation indicatesthe correct direction (in the case ...
Page 39 - MAINTENANCE
Page 40 - General Maintenance
MAINTENANCE Maintenance Section 5-2 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 General Maintenance The importance of regular maintenance and inspection as a means of prolonging the life and maintaining theefficiency of the Grizzly cannot be overemphasized. For lubrication use Shell EP2 grease or equal...
Page 41 - Assembly; SERIES II MODEL
MAINTENANCE Maintenance Section 5-3 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 - Using a large pair of snap ring pliers, remove retaining ring from the bottom of the housing. - Remove bottom cover from housing. - Wash all parts in solvent and inspect carefully for damage or excessive wear. Magnaflux t...
Page 42 - Bikon Hub
MAINTENANCE Maintenance Section 5-4 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 Bikon Hub 1. Read and be familiar with the Bikon Lock Instructions.2. Dismantle new Bikon Lock. Clean off preserving oil with rag.3. Clean shaft end and bore of Bikon Lock.4. Apply light coat of machine oil to shaft and Bik...
Page 44 - Blade Arm; Blade Bolts; Installation & Removal of Locking Assembly; Motor Mounting Plate
MAINTENANCE Maintenance Section 5-6 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 Blade Arm 1. The taper fit between the Blade Arm and the shaft must be blued and checked. Only perfect fits are acceptable -- reject anything less.2. Warm Blade Arm to 180-200 degrees C.3. Slip Blade Arm on shaft and tighte...
Page 46 - General Instructions
MAINTENANCE Maintenance Section 5-8 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 Removal 1. Make sure axial movement of clamp collars - necessary for release of connection - is not resricted. 2. Relax all locking screws by at least 2 turns and transfer locking screws into all push-off threadsprovided in...
Page 48 - ALAMO INDUSTRIAL
LIMITED WARRANTY 1. LIMITED WARRANTIES 1.01. Alamo Industrial warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser(“Purchaser”) that the goods pur...
