Airlink101 AWLH3026T - Manuals

Page 2 - Table of Contents

2 Table of Contents 1. Introduction ................................................................................................................. 3 1.1 Package Contents ................................................................................................. 3 2. Installation ..............

Page 3 - Package Contents; Detachable Antenna

3 1. Introduction Thank you for purchasing the 802.11g Wireless PCI Adapter. The Wireless PCI Adapter is an advanced IEEE 802.11b/g compatible, high-performance wireless card that supports data transfer speeds of up to 54 Mbps. The adapter can be integrated into a network in either Ad-Hoc mode (with...

Page 4 - . The driver is installed along with the utility.; Found New Hardware Wizard; . The wizard appears; Cancel; to quit the wizard and

4 2. Installation 2.1 Install Driver & Utility This section provides instructions on how to install the Airlink101 802.11g Wireless PCI Adapter . The driver is installed along with the utility. Note: Be sure to power off your computer before inserting the PCI adapter. For Windows 98SE and ME use...

Page 5 - The Autorun screen will appear. Select; Install Utility and Driver; Click; Next; at the welcome screen.

5 Step 3 The Autorun screen will appear. Select Install Utility and Driver from the menu. Note: If the Autorun screen doesn’t appear automatically go to Start, Run, and type D:\utility\setup.exe (where D is the letter of your CD drive) and click OK. Step 4 Click Next at the welcome screen.

Page 6 - to accept the default destination folder.; to accept the default program folder.

6 Step 5 Click Next to accept the default destination folder. Step 6 Click Next to accept the default program folder.

Page 8 - Verify Driver Installation; from your desktop and select

8 2.2 Verify Driver Installation To verify if the driver has been installed successfully, please perform the following steps. Step 1 Right-click on My Computer from your desktop and select Properties . Step 2 Select the Device Manager tab. (For Windows 2000/XP, select the Hardware tab first and then...

Page 9 - Expand; Network adapters; from the list and verify that; Adapter; is listed and no yellow question mark is beside it.

9 Step 3 Expand Network adapters from the list and verify that Airlink101 802.11g PCI Adapter is listed and no yellow question mark is beside it. If Airlink101 802.11g PCI Adapter is not listed, or you see a yellow question mark beside it, please re-install the driver again.

Page 10 - Configure the Wireless PCI Adapter; Note to Windows XP Users:; in the system tray and

10 3. Configure the Wireless PCI Adapter This section describes how to connect your Airlink101 802.11g Wireless PCI Adapter to a wireless network. Note to Windows XP Users: You must disable the Wireless Zero Configuration Utility in order to use the WLAN Monitor. Please refer to the following steps ...

Page 11 - To open the Wireless PCI Adapter’s utility go to; WLAN Monitor; box and click; Connect

11 To open the Wireless PCI Adapter’s utility go to Start > (All) Programs > Airlink101 > WLAN Monitor . Note: The utility automatically adds an available wireless network to the Preferred WLANs box. If no SSID is added, or if the SSID is wrong, please refer to the following steps to join t...

Page 12 - OK; to exit the message.; Preferred WLANs; Apply

12 Step 2 If you are connecting to an unsecured wireless network, a caution message will appear. Click OK to exit the message. Step 3 Verify the SSID you have selected is in the Preferred WLANs box and click Apply . Step 4 A blue circle appears indicating a connection is established. Click OK . Note...

Page 13 - Configure the WLAN Monitor; Configuration Tab

13 4. Configure the WLAN Monitor This section describes the various functions of the WLAN Monitor that you can configure, including the settings of wireless encryption. 4.1 Configuration Tab The Configuration Tab displays all available Access Points detected. Available WLANs : Displays all available...

Page 18 - Status Tab; The SSID that the wireless adapter is connected to; Authentication State:; Displays the authentication state; Hardware Information:

18 4.2 Status Tab The Status Tab displays information about the Connection State, Hardware Information, and Advance State. Connection Status: Displays the status of the connection SSID: The SSID that the wireless adapter is connected to BSSID: The MAC Address of the Access Point that the wireless ad...

Page 21 - About Tab; displays the Driver and Utility’s version number.

21 4.4 About Tab The About Tab displays the Driver and Utility’s version number.

Page 23 - Technical Support

23 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com *Theoretical maximum wireless signal rate based on IEEE standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of netw...