Airlink101 ASOHOUSB - Manuals

Page 2 - Table of Contents

Table of Contents Introduction......................................................................................... 3 Package Contents ........................................................................... 3 Features .............................................................................

Page 3 - Introduction; Package Contents

Introduction The USB 2.0 Ethernet Adapter is a high performance and highly integrated USB 2.0 bus Ethernet Controller with embedded 7K*16 bit SRAM. The Adapter supports both 10 Mbps and 100 Mbps Ethernet function based on IEEE802.3 and IEEE802.3u LAN standard. Package Contents • USB 2.0 Ethernet Ada...

Page 4 - Installation; Insert the Driver CD into your CD drive.; Exit; to close the autorun screen.; Next; at the Add New Hardware Wizard.

Installation Windows 98SE Step 1 Power on your computer and connect the USB 2.0 Ethernet Adapter to your computer’s USB port. Step 2 Insert the Driver CD into your CD drive. Step 3 If the autorun screen appears, click Exit to close the autorun screen. Step 4 Click Next at the Add New Hardware Wizard...

Page 5 - Select; Search for the best driver for your device (Recommended); and click; Check on the; Specify a location; check box and click; Browse

5 Step 5 Select Search for the best driver for your device (Recommended) and click Next . Step 6 Check on the Specify a location check box and click Browse .

Page 7 - Windows ME

7 Windows ME Step 1 Power on your computer and connect the USB 2.0 Ethernet Adapter to your computer’s USB port. Step 2 Insert the Driver CD into your CD drive. Step 3 If the autorun screen appears, click Exit to close the autorun screen. Step 4 Select Specify the location of the driver (Advanced) a...

Page 8 - Click; to install the driver.; Finish; to complete the installation.

8 Step 7 Click Next to install the driver. Step 8 Click Finish to complete the installation. Step 9 Connect an Ethernet cable from the USB 2.0 Ethernet Adapter to the desired Ethernet device. Step 10 Restart your computer.

Page 9 - at the Found New Hardware Wizard.

9 Windows 2000 Step 1 Power on your computer and connect the USB 2.0 Ethernet Adapter to your computer’s USB port. Step 2 Insert the Driver CD into your CD drive. Step 3 If the autorun screen appears, click Exit to close the autorun screen. Step 4 Click Next at the Found New Hardware Wizard.

Page 10 - Search for a suitable driver for my device (recommended); folder and click; OK

10 Step 5 Select Search for a suitable driver for my device (recommended) and click Next . Step 6 Click Browse , expand the CD drive, select Win2000 folder and click OK .

Page 12 - Verify Driver Installation; My Computer; from your desktop and select; Properties; Select the; Hardware; tab and click on; Device Manager

12 Verify Driver Installation To verify if the driver has been installed successfully, please perform the following steps. Step 1 Right-click on My Computer from your desktop and select Properties . Step 2 Select the Hardware tab and click on Device Manager .

Page 13 - Expand; Network adapters; from the list and verify that; to Fast Ethernet Adapter; is listed and no yellow question mark is beside it.

13 Step 3 Expand Network adapters from the list and verify that ASIX ax88772 USB2.0 to Fast Ethernet Adapter is listed and no yellow question mark is beside it. Congratulations! You have successfully installed the USB 2.0 Ethernet Adapter.

Page 14 - Technical Support

14 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com *Actual throughput will vary. Network conditions and environmental factors lower actual throughput rate. Copyright © 2005 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 lo...