Airlink101 AR504 - Manuals - manualsarea.com

Page 2 - Note

Section 1 Connect the Router Note : Prior to connecting the router, be sure to power off your computer, DSL/Cable modem, and the router. Step 1 Connect one end of a network cable to the WAN port of the router and connect the other end of the cable to the DSL/Cable modem. Step 2 With another network ...

Page 5 - Section 3; Enter

Step 8 After your IP address is released, click Renew . You should get an IP address of 192.168.1.x (where x is a number between 2 - 254). If you don’t get an IP address, reset the router by holding in the reset button at the back of the router for 10 seconds while it is ON and try Renew again. Sect...

Page 6 - Runner

Step 3 Click on Wizard from the main menu to open the Setup Wizard. Step 4 Click Next to begin the Setup Wizard. Step 5 Select your WAN Type (Internet Connection Type) and click Next . If you are not sure what your Internet Connection Type is, please contact your Internet Service Provider (ISP) for ...

Page 7 - Static IP; Next; Cable Modem; Host Name

Step 6 Follow the steps below according to your Internet Connection Type. Static IP Fill in the applicable fields according to the information provided by your ISP. Click Next when done and proceed to Step 7 . Cable Modem If your ISP has provided you with a host name, enter it in the Host Name field...

Page 8 - Road Runner; DSL

Road Runner Fill in the applicable fields according to the information provided by your ISP. Click Next when done and proceed to Step 7 . DSL Fill in the applicable fields according to the information provided by your ISP. Click Next when done and proceed to Step 7 . Note: Depending on the ISP, you ...

Page 9 - P P T P; L 2 T P

P P T P Fill in the applicable fields according to the information provided by your ISP. Click Next when done and proceed to Step 7 . L 2 T P Fill in the applicable fields according to the information provided by your ISP. Click Next when done and proceed to Step 7 .

Page 10 - OK; Section 4, Verify Connection Status; Reboot

Step 8 Click OK to confirm reboot. Step 9 Wait for the router to reboot and proceed to Section 4, Verify Connection Status . Step 7 Click Reboot to apply your settings.

Page 12 - For Cable Modem Users Only

Section 5 Troubleshooting For Cable Modem Users Only Step 1 Go to the router’s Setup Wizard. Step 2 At the Cable Modem setting ( Dynamic IP Address ), click on the Clone MAC button and click Next . Step 3 Once you clicked the Renew or Connect button, you should see some numbers under WAN Status . Th...

Page 13 - For Cable Modem and DSL Users; Step 2; Technical Support; For DSL Users Only

For Cable Modem and DSL Users Step 1 Power off the Cable/DSL modem, router, and computer and wait for 5 minutes . Step 2 Turn on the Cable/DSL modem and wait for the lights on the modem to settle down. Step 3 Turn on the router and wait for the lights on the router to settle down. Step 4 Turn on the...