Airlink101 APSUSB201 - Manuals

Page 2 - OFF; , then connect one end of the USB cable to the USB port of; ON; Connecting the Print Server; other USB device to the Print Server may damage the Print Server.

Step 1 Connect one end of the Ethernet cable to the RJ-45 port of the Print Server and attach the other end of the cable to a router. Step 2 Make sure the printer is powered OFF , then connect one end of the USB cable to the USB port of the Print Server and attach the other end of the cable to the U...

Page 3 - Insert the provided CD and wait for the setup menu to appear.; PS Utility; Click; Next; type; OK

Section 2 Installing PS Utility Step 1 Insert the provided CD and wait for the setup menu to appear. Step 2 Click on PS Utility . Step 3 Click Next . Note: If the setup menu does not appear automatically after you have inserted the CD, go to Start , Run , type D:\autorun.exe (where D is the letter o...

Page 4 - Yes; Finish

Step 4 Click Next . Step 5 Click Yes . Step 6 Click Finish .

Page 5 - ipconfig

Section 3 Configuring Network Setting Before configuring the Print Server’s network setting, please take note of your computer’sTCP/IP setting. Step 1 Click on Start , Run , and type command (for Windows 95/98/ME) or cmd (for Windows 2000/ XP) and click OK . Step 2 At the command prompt, type ipconf...

Page 8 - Click on the; Tools; link and select the port your printer is connected to and click the; Test; for a list of compatible printers. If your printer is

Step 5 Click on the Tools link and select the port your printer is connected to and click the Test button. The Print Server will perform a low-level print test, bypassing the operating system layer. Note: Your printer should print out a test page. If not, verify that the printer is powered on and al...

Page 9 - Step 1; PS Wizard

Section 5 Running PS Wizard Warning: Make sure you have installed the printer driver locally on every computer that will use the print server in your network before running the PS Wizard. Otherwise, the PS Wizard will not run properly.Be sure to run the PS Wizard on all the computers that will use t...

Page 10 - Section 4; Select the printer that is connected to the print server and click

Section 4 Step 3 Click Next . Step 4 Select the printer that is connected to the print server and click Next .

Page 12 - Section 6; Performing Operating System Print Test; similar for all the other Windows operating systems.; Click on; Start

Section 6 Performing Operating System Print Test The final step in setting up the Print Server is to perform an operating system print test. Please note that the instructions below are for Windows XP, but the steps are similar for all the other Windows operating systems. Step 1 Click on Start , Sett...

Page 13 - Mac OS, please refer to the User’s Manual in the provided CD.; Print Test Page; button. Windows should print out a test page.

Section 7 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com For more information on how to use the Web Configuration Utility or setup for Mac OS, please refer to the User’s Manual in the provided CD. You have successfully configured the Print Ser...