Page 3 - Checking the Package Contents; NOTE; Getting to Know Your Camera; Front and Top View
- 2 - C H AP T E R 1 I N T R O D U C T I O N T O Y O U R C AM E R A 1.1 Checking the Package Contents Check the items contained in the package carefully. You should have the following: One SkyIPCam1620 PoE MPEG4 3GPP Network Camera One AC Power Adapter One W all Mount Kit One GPIO & RS485 Adapte...
Page 4 - Rear View
- 3 - Rear View * The camera’s Ethernet port supports IEEE 802.3af Power-over-Ethernet (PoE) standard that enables DC power to be supplied to the camera using wires in the connecting twisted-pair cable. Any 802.3af compliant device attached to the port can directly supply power to the camera over th...
Page 5 - Features and Benefits; window of Web Configuration.
- 4 - 1.3 Features and Benefits Thank you for purchasing the SkyIPCam1620 PoE MPEG4 3GPP Network Camera, a standalone system that can be connected directly to an Ethernet or Fast Ethernet network. With MPEG4 image compression technology, you can record streaming video that utilizes high quality imag...
Page 6 - Multiple Applications Supported; System Requirements; Networking
- 5 - Multiple Applications Supported Through the remote access technology, you can use the cameras to monitor various objects and places for your own purposes. For example, babies at home, patients in the hospital, offices and banks, and more. The camera can capture both still images and video clip...
Page 7 - Applications of the Camera; Capture still images and video clips remotely.; Home Applications
- 6 - 1.5 Applications of the Camera The SkyIPCam1620 can be applied in multiple applications indoor, including: Monitor local and remote places and objects via Internet or Intranet. Capture still images and video clips remotely. Upload images or send email messages with the still images attached. T...
Page 8 - Connecting Your Camera to LAN; Step 1; Assemble and attach the provided wall mount kit to the camera.; Step 2; Please proceed to Chapter 3 for camera configuration.
- 7 - C H AP T E R 2 H AR D WAR E I N S TAL L AT I O N 2.1 Connecting Your Camera to LAN Step 1 Assemble and attach the provided wall mount kit to the camera. Step 2 Connect one end of the provided Ethernet cable to the camera and connect the other end to one of the LAN ports on your router or switc...
Page 9 - Setting up Your Camera; Insert the provided CD into your computer’s CD ROM drive.; Install Utility and Software; when the autorun menu pops up on the screen.; UltraView
- 8 - C H AP T E R 3 C AM E R A C O N F I G U R AT I O N 3.1 Setting up Your Camera Step 1 Insert the provided CD into your computer’s CD ROM drive. Step 2 Click on Install Utility and Software when the autorun menu pops up on the screen. Note: If you do not see the autorun menu pops up on the scree...
Page 10 - Click; Install; to install the utility.; Finish; when installation finishes.
- 9 - Step 3 Click Install to install the utility. Step 4 Click Finish when installation finishes.
Page 11 - Start; Click on; Search; and click on; Change IP
- 10 - Step 5 Open SkyIPCam Utility by double clicking its icon on the desktop, or clicking Start , then go to (All) Programs > Airlink101 SkyIPCam UltraView > SkyIPCam Utility . Step 6 Click on Search to find the camera(s) on your network. Select the camera you wish to configure and click on ...
Page 12 - to let your router; “admin”; for both; password; Wait for 30 seconds and the camera will be restarted. Click; OK; when you see this message.
- 11 - Step 7 Please configure a unique static IP address for your camera. The IP address you configure must match with your local network setting. For example, if your router’s IP address is 192.168.1.1, and its subnet mask is 255.255.255.0, the IP address you assign to the camera must be 192.168.1...
Page 15 - and the
- 14 - Note Be sure to enter Primary/Secondary DNS addresses assigned by your ISP if you set up Static IP for the camera so that the Email alert / FTP uploading can function properly. Step 13 If you would like to set up email alerts that you can receive in the future, Please enter your email informa...
Page 16 - Viewing Image via Your Camera; Method A > Access Camera from SkyIPCam Utility; Step 1A; Method B > Access Camera from Web Browser; Step 1B; Type the IP address of your camera in the Address bar, and press; Enter
- 15 - 3.2 Viewing Image via Your Camera Method A > Access Camera from SkyIPCam Utility Step 1A Open Airlink101 SkyIPCam Utility, select the camera you wish to connect to and click on Link button. Go to Step 3 . Method B > Access Camera from Web Browser Step 1B If you assigned a static IP addr...
Page 18 - Note; you have Java and Quick Time add-ons installed.
- 17 - Note If you are using Mozilla Firefox or Safari and you are not able to view any image, please make sure you have Java and Quick Time add-ons installed.
Page 22 - Network Settings; IP Setting; Utility to obtain the related setting values.; IP; Subnet Mask; Default Gateway; THIS IS MANDATORY IF YOU WANT TO USE FTP OR EMAIL FUNCTIONS; User Name; and; Password; starting up. If you are using a router, do NOT select this option.
- 21 - 4.2 Network Settings The Network menu contains three sub-menus that provide the network settings for the camera, such as the IP Setting, DDNS Setting, and IP Filter. Network >> Network IP Setting This item allows you to select the IP address mode and set up the related configuration. - ...
Page 28 - on the live view image.
- 27 - - Includes Date & Time: Check this option to display the date & time stamp on the live view image. - Include Text: Check this option and enter the text (i.e. Camera Room A01) you wish to display on the live view image. - Enable Opaque: Check this option to set a black background to th...
Page 30 - Email; Enter the mail server address. For example,; Sender Email Address:; Enter the user name to login the mail server.; addresses under “Network” to let the Email function work properly.; Test; to find out if the related configuration is; Apply
- 29 - Event Server Setting >> Email Email - SMTP Server Address: Enter the mail server address. For example, mymail.com . - Sender Email Address: Enter the email address of the user who will send the email. For example, [email protected] . - Sender User Name: Enter the user name to login the ma...
Page 32 - To enable the detecting area, select; Window 1; or; Enable; Assign a name to the detecting area.; Event Config; will be
- 31 - 4.5 Motion Detect *This function can only be configured in W indows Internet Explorer. The Motion Detect menu contains the command and option that allow you to enable and set up the motion detection feature of the camera. The camera provides two detecting areas. To enable the detecting area, ...
Page 33 - Network Storage Recording Time Per Event:; Limit the recording time while you are using the; GPIO Trigger Out Retention Time Per Event:; Limit the retention time of the GPIO Trigger Out
- 32 - 4.6 Event Config The Event Configuration menu contains five sub-menus that provide the commands to configure event profiles. Event Configuration >> General Setting - Snapshot/Recording Subfolder: You can assign a given sub-folder for captured file. Otherwise, leave this option blank to ...
Page 34 - Event Configuration >> Motion Detect Trigger
- 33 - Event Configuration >> Schedule Profile This sub-menu displays the scheduled profile(s). To configure a new profile, click Add and then enter a descriptive name for the profile in the prompt dialog window. After entering the profile name, click OK and the profile is added to the Schedul...
Page 36 - Trigger Out
- 35 - - Schedule Profile: Select a schedule profile from the pull-down list. - Action: Set the Trigger Out function or select the destination that the captured images will be sent to: Record to Network Storage , Send Email , or FTP Upload .
Page 39 - About the Control Buttons; Control Buttons of RS-485; buttons allow you to move the camera lens position. Clicking the; Home; Click the; Number button
- 38 - About the Control Buttons After enabling RS-485 function, the control panel will appear on the Live View window. Control Buttons of RS-485 - Left/Right/Up/Down/Home buttons allow you to move the camera lens position. Clicking the Home (center) button will move the camera lens to the assigned ...
Page 40 - The Logs table displays the events log recorded by the system.
- 39 - 4.9 Information The Information menu displays the current configuration and events log of the camera. Information >> Device Info Display the Basic, Video & Audio, and Network settings of the camera. Information >> System Log The Logs table displays the events log recorded by t...
Page 41 - I PC; Starting the Program; admin; Configuring the System > User Management
- 40 - C H AP T E R 5 U S I N G S K Y I PC AM U LT R A V I E W 5.1 Starting the Program To start UltraView Pro, click Start (All) Programs Airlink101 SkyIPCam UltraView SkyIPCam UltraView . Alternately, you can start the program by simply double-clicking the program icon on the desktop of your compu...
Page 42 - Main Window and Item Feature
- 41 - 5.2 Main Window and Item Feature When you start and login to UltraView, the Main window will display as below: The Main window provides you with the information on operating the system, as well as the control panel such as the Quick Launch buttons, and so on. NOTE UltraView Pro requires the r...
Page 43 - buttons in this area allow you to switch the camera view mode.; storage space of the system.
- 42 - Camera View Mode buttons in this area allow you to switch the camera view mode. Button Function Display the connected camera(s) in single camera view mode. Display the connected camera(s) in quad view mode. Display the connected camera(s) in 3 x 3 grid view mode. Display the connected camera(...
Page 44 - Patrol; Stop
- 43 - number (1~8) from the Go button. Navigation Buttons (Left/Right/Up/Down/Home). If the connected camera features pan/tilt functions, the Navigation buttons allow you to move the camera lens position. Clicking the Home (center) button will move the camera lens to the assigned home position. **A...
Page 45 - Accessing the Camera; Adding a Camera; Device Setting; to display the Device Setting window.; New; Device Search
- 44 - 5.3 Accessing the Camera Before you can access the camera, you have to add the camera to the system. Adding a Camera 1. Click the button and select Device Setting to display the Device Setting window. 2. Click New . 3. Click Device Search to search the camera(s) within your network.
Page 46 - When search is finished, select the camera and click; Add; Save
- 45 - 4. When search is finished, select the camera and click Add . 5. The information of the camera will be displayed on the window. When completed, click Preview and then click Save to return to the Device Setting window. The added camera will be displayed in the Device List. Option Description M...
Page 47 - Disconnect; TIP
- 46 - Disconnect to stop previewing. TIP You cannot set the motion detection area while adding the new camera. To set the motion detection area of the camera, select the desired camera and click the Modify button on the Device Setting window. See the following section for more information. 6. Close...
Page 48 - Editing / Deleting a Camera
- 47 - Editing / Deleting a Camera Since you have added camera(s) to the system, you can select one to edit or remove. 1. On the Device Setting window, the connected camera(s) will be displayed in the Device List. 2. To delete the camera: select the desired one and then click Remove . When prompted,...
Page 49 - Viewing Image of the Camera; The; Information
- 48 - Viewing Image of the Camera Since you have added camera(s) to the system, the image of the selected camera(s) will be displayed on the Live View W indow automatically. You can view a maximum of 32 cameras simultaneously. Additionally, you can select one-camera or other view mode to display th...
Page 50 - Enabling / Disabling Recording; Record; after you finish setting.; All Continuous Recording; to set all cameras to start recording, or select; Stop All; to set all cameras to stop recording.
- 49 - 5.4 Recording / Playing Video Enabling / Disabling Recording While you are adding/editing the camera, you can enable the recording function for the camera by selecting the Record option. Click Save after you finish setting. Alternately, you can set all cameras to start/stop recording when you...
Page 51 - Configuring the Recording Settings; Setting up Schedule for Recording
- 50 - Configuring the Recording Settings The default directory for saving the recorded video files is “C:\”. You can change the target folder for saving the files in the Record Setting option. 1. Click the button and then select Record Setting . 2. To assign the target folder for saving the recorde...
Page 52 - Playback the Recording Files
- 51 - Click the button to display the Schedule Configuration window, which allows you to configure the recording schedule. 1. Click New , and then enter the Schedule Title. 2. Select the checkboxes below the Schedule Title to set the time to record video. One checkbox stands for 30 minutes of recor...
Page 53 - The search result will be displayed in the Record File list.; Play
- 52 - NOTE Divx/Xvid codec is required for the system to play the video files. If the video clips cannot be displayed in the Playback window normally, click the following path to download and install the required component: http://download.divx.com/divx/DivXInstaller.exe 1. Click the button to disp...
Page 54 - Configuring the eMap View Setting; View Setting
- 53 - 5.5 Configuring the eMap View Setting Click the button and select View Setting to configure the camera view setting of eMap mode. eMap refers to the geography and device scope of the UltraView Pro, which visually presents the devices in your security system. It uses a background of the area (...
Page 55 - after you complete the settings.; Camera Location
- 54 - Click Save after you complete the settings. 4. On the following window, you can assign the camera position in the eMap. Click the Camera Location button to display the Edit window. Select the camera from the Camera List, and then click the mouse on the desired position of the map. The camera ...
Page 56 - When completed, click; to go back to the Main window.; eMap View
- 55 - 5. When completed, click Save . Click Back to go back to the Main window. 6. To view from eMap: a. Click the button and select eMap View .
Page 57 - Select the map from the eMap Name list.
- 56 - b. Select the map from the eMap Name list. c. Click the camera icon, the camera window will then pop up to display the image on the spot.
Page 58 - Editing / Deleting the eMap; In the eMap List, select the desired map and click; Modify; In the eMap List, select the desired one and click; Remove; The selected map will be removed from the list.
- 57 - Editing / Deleting the eMap 1. Click the button and select View Setting . 2. To edit the eMap: In the eMap List, select the desired map and click Modify . The map’s information will be displayed, where you can change the map’s information and then click Save when completed. 3. To delete the e...
Page 59 - Configuring the System; User Management; Account
- 58 - 5.6 Configuring the System User Management Click the button and select Account to change the administrator password for the UltraView software. Enter the Current password , and then enter the new password twice (in the Type new password and Retype password boxes). When completed, click Save .
Page 60 - Event Configuration; Configuring Event Trigger; Event Trigger
- 59 - 5.7 Event Configuration Configuring Event Trigger Click the button and select Event Trigger to configure the trigger out function of the camera. 1. On the Event Trigger window, select the desired camera from the Camera List. 2. Do one of the following: SMTP: Select this option and enter the S...
Page 61 - Setting up Event Server
- 60 - Setting up Event Server Click the button and select Event Server to configure the SMTP server, so that you can send emails that include still images as notification. Select the Enable SMTP option to start the email service of the system. When you enable the service, you have to complete the f...
Page 62 - Sending Email Notification
- 61 - Sending Email Notification Click the button and select Address Book to assign the user to the Address Book of the camera. The user will receive a real-time notification from the system while triggering out. 1. On the Address Book window, click New . 2. In the Address Book Information field, e...
Page 63 - Changing System Language
- 62 - 5.8 Changing System Language Click the button and select language to change the displayed system language. On the Language screen, select the preferred language ( English , Traditional Chines e, or Simplified Chinese ) and click Save .
Page 64 - Terminating Operation; When you have finished operating, click the; Logout; to logout the system or; Close; to exit the program.
- 63 - 5.9 Terminating Operation When you have finished operating, click the button and select Logout to logout the system or Close to exit the program.
Page 65 - Image Sensor
- 64 - C H AP T E R 6 A P P E N D I X A.1 Specification Image Sensor • Sensor Type: 1/3” Color CMOS • Sensor Resolution: 640 x 480 pixel • Minimum Illumination: 0.5 Lux Lens • Lens Type: CS-Mount • View Angle (Diagonal): 72 degree • Focal Length: 4mm • Aperture (F/No.): F1.2 Video • Image Compressio...
Page 66 - A.2 GPIO Terminal Application; Connector Pin Assignment; PIN; Interface Schematic
- 65 - A.2 GPIO Terminal Application Typically used in association with programming scripts for developing applications for motion detection, event triggering, alarm notification via e-mail, and a variety of external control functions. The 6-pin I/O Terminal Block is located on the rear panel and pr...
Page 67 - A.3 Bandwidth Reference Guide; MJPEG; Resolution
- 66 - A.3 Bandwidth Reference Guide MPEG4 Bit rate (Kbit/s) Resolution Frame rate (fps) Lowest Low Normal High Highest QQVGA 30 128 128 128 128 128 QVGA 30 128 128 256 512 1024 VGA 30 128 256 512 1024 2048 MJPEG Image size (KB) Resolution Lowest Low Normal High highest QQVGA 1.5 1.9 2.4 2.7 4.1 QVG...
Page 68 - A.4 Glossary of Terms; NUMBERS
- 67 - A.4 Glossary of Terms NUMBERS 10BASE-T 10BASE-T is Ethernet over UTP Category III, IV, or V unshielded twisted-pair media. 100BASE-TX The two-pair twisted-media implementation of 100BASE-T is called 100BASE-TX. A ADPCM Adaptive Differential Pulse Code Modulation, a new technology improved fro...
Page 72 - Technical Support
- 71 - 1 2 3 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com * Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate. Specifications are subject to change without notice. All products a...
Airlink101 AWLL3055
Manual
Airlink101 AIC250
Manual
Airlink101 AWLH5075
Manual
Airlink101 AGIGAUSB
Manual
Airlink101 AWLH5025
Manual
Airlink101 AWLL4030
Manual
Airlink101 AWLC5025
Manual
Airlink101 AWLL6077V2
Manual
Airlink101 AMPS230
Manual
Airlink101 AWLH6045
Manual
Airlink101 AIC1620W
Manual
Airlink101 AWLC6045
Manual
Airlink101 AWLL3026
Manual
Airlink101 AGIGACB
Manual
Airlink101 AWLH6080
Manual
Airlink101 AWLL6070
Manual
Airlink101 AWLC6080
Manual
Airlink101 AICN1747W
Manual
Airlink101 AICN747W
Manual
Airlink101 APSUSB1
Manual