Airlink101 AEN-U55W - Manuals

Airlink101 AEN-U55W – Manual in PDF format online.

Manuals:

Manual

Manual Airlink101 AEN-U55W

Summary

Page 2 - Table of Contents

2 Table of Contents 1. Introduction ................................................................................................................................. 3 1.1 Package Contents ..................................................................................................................

Page 3 - Package Contents

3 1. Introduction Thank you for purchasing this 5.25” USB 2.0 Enclosure Box. The Enclosure Box provides an easy way to add removable disk storage space to your computer. The Hi-Speed USB 2.0 interface ensures fast and reliable connection between the external drive and the computer. With the Hot Swap...

Page 4 - Remove the four pads attached to the enclosure box.

4 2. Installation Follow the steps below for connecting a 5.25” CD/DVD Drive. If you are connecting a 3.5" hard drive, please skip Section 2.2, Hard Drive Installation. 2.1 CD/DVD Drive Installation Step 1 Remove the four pads attached to the enclosure box. Step 2 Use the provided screwdriver to...

Page 6 - Master; Replace the top cover and re-secure the screws removed in Step 1.

6 Step 5 Place the CD/DVD drive with the drive's top facing up and then connect the IDE cable and the power cord to the drive. Make sure the CD/DVD drive you are installing is set to “ Master ” (refer to the jumper setting information printed on your CD/DVD drive). Step 6 Replace the top cover and r...

Page 7 - Hard Drive Installation

7 Step 7 Re-attach the four pads to the enclosure box and then connect the supplied power adapter and USB cable to the enclosure box. Congratulations! The CD/DVD drive installation is complete. 2.2 Hard Drive Installation Step 1 Remove the four pads attached to the enclosure box.

Page 9 - below. Make sure the hard drive you are installing is set to “; ” (refer to the jumper

9 Step 4 Remove the two screws holding plate A and then remove plate A from plate B. Step 5 Remove plate B from the enclosure box and place the hard drive as shown below. Make sure the hard drive you are installing is set to “ Master ” (refer to the jumper setting information printed on your hard dr...

Page 11 - Congratulations! The hard drive installation is complete.

11 Step 8 Connect the IDE cable and power cord to the hard drive and then hook plate B back to the enclosure. (Be sure to apply enough force to properly secure the drive). Step 9 Replace the front panel. Step 10 Replace the top cover and re-secure the screws removed in Step 1. Step 11 Re-attach the ...

Page 12 - Driver Installation for Windows 98SE; Click; Next; when the; Add New Hardware Wizard

12 3. Driver Installation for Windows 98SE This Enclosure Box supports Plug-and-Play for Windows ME, 2000, XP, and Mac OS. If you are using Windows 98SE, please refer to the following steps for installing the driver. Step 1 Connect the Enclosure Box to the computer and insert the provided Driver CD ...

Page 13 - Select; Search for the best driver for your device (Recommended); and click; Select the; Specify a location; check box and click; Browse; drive and open the

13 Step 3 Select Search for the best driver for your device (Recommended) and click Next . Step 4 Select the Specify a location check box and click Browse to your CD-ROM drive and open the Driver/Win98SE folder. Click Next .

Page 14 - to install the driver.; Finish; to complete the driver installation.

14 Step 5 Click Next to install the driver. Step 6 Click Finish to complete the driver installation.

Page 15 - Installation Verification; Control; and look for; USB Mass Storage; under; Universal Serial Bus controllers; . If it is listed, you have successfully

15 4. Installation Verification To verify your installation, please follow the steps below. 4.1 Windows 98SE Go to Control Panel > System > Device Manager and look for USB Mass Storage Device under Universal Serial Bus controllers . If it is listed, you have successfully installed the Enclosur...

Page 17 - Go to; Apple System Profiler > Devices and Volumes; . If you see the Enclosure Box; USB Information; , you have successfully installed the Enclosure Box.

17 4.3 Mac OS 10.x Go to Apple System Profiler > Devices and Volumes . If you see the Enclosure Box listed under USB Information , you have successfully installed the Enclosure Box.

Page 18 - Removing the Enclosure Box Safely

18 5. Drive Usage Now you are ready to use the attached drive as an external storage device. A brand new hard drive must be formatted and partitioned first. You can use Windows Disk Management utility in Windows XP/2000, Mac built-in partition utility, or other disk management software as required t...

Page 19 - FCC and CE

19 For Mac OS Drag the corresponding USB disk icon that represents the hard drive to the trash can. When prompted, click OK and unplug the Enclosure Box from your computer. 6. Specifications Standards • USB 2.0 Drive Support • CD-ROM/RW • DVD-ROM/RW • 3.5” IDE HDD Ports • 1 USB 2.0 Type B receptacle...

Page 20 - Technical Support

Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com *Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate. Specifications are subject to change without notice. All products and trademarks ...