Bradley TDB3104 - Manual

Table of Contents:

• Page 2 – Pre-Installation Information; IMPORTANT: Main water supply to the unit should be ON at all times.; Cylindrical air valve; Terreon® Semi-circular Washfountain Warranty
• Page 3 – Semi-Circular Washfountain Dimensions; Figure 1a
• Page 4 – Figure 1b; pedestal access; Figure 1c
• Page 5 – Figure 1d
• Page 6 – Rough-In Specifications; Figure 2a; Type A Drain; Figure 2b; Type B Drain
• Page 7 – Figure 2c; Type H Drain
• Page 8 – With Tie Pipe; Step 1: Installing the drain; NOTE: All piping shown in dotted lines to be supplied by installer.; Figure 3; Table 1 — “B” Trap Dimensions
• Page 9 – Step 2: Bowl/pedestal mounting and assembly; CAUTION: BOWL SURFACE IS VERY SMOOTH. APPROXIMATE WEIGHT OF BOWL; Figure 5b; TOP VIEW
• Page 10 – Step 3: Installing drain spud in bowl; Attach B Trap to drain spud.; Figure 6
• Page 11 – tube and connect to valve tube connector.; Figure 7
• Page 12 – NOTE: Skip to number 5 for units without soap.; Figure 8
• Page 13 – Figure 9
• Page 14 – the valve assembly and connect to the air valve.
• Page 16 – VALVE AND TUBING CONNECTIONS - AIR METERING VALVE OPTION; Step 5: Valve and Tubing Connections; NOTE: Flush supply lines before making connections.
• Page 18 – counterclockwise
• Page 19 – Cleaning/Maintenance Instructions for Terreon®; Special Situations for Material; Hard Water Deposits:; NOTE: Repair kits are made to order and have a shelf life of 30 days.; Cleaning/Maintenance Instructions for Gel-coated Fiberglass; Material Description:
• Page 20 – Cleaning and Maintenance Instructions for Stainless Steel; Finger Prints and Smears:
• Page 21 – Parts List
• Page 23 – SOAP RECOMMENDATIONS; • Push valve at least 20 times while it is soaking.; Soap Maintenance Tips
• Page 24 – Sprayheads — Standard w/Neoprene Spray Ring Grommet; Problem: Water splashes over the rim of the bowl.
• Page 25 – Actuator Module Components; Adjust Air Valve Meter Time
• Page 26 – AST4 Valve Repair Kits
• Page 27 – Metering Air Valve Troubleshooting; Cause: Water is not being supplied to unit.; Problem: Timing can not be adjusted for more than 5 seconds.; Cause: There is an air leak; Problem: Pushbutton does not work properly.; Cause: Air volume may not be sufficient to operate valve.; Problem: Water is dripping from the streamformers.; Cause: Debris has accumulated on valve seat or orifices.
• Page 28 – Thermostatic Mixing Valve Troubleshooting; connections or leaking stop/check valves.; Problem: Limited water flow; Cause: Dirt and debris have built up in the valve or strainer.; Problem: External leaks in the system; Cause: Thermostat is slowly failing or not working at all.; wise; increase; the temperature or; clockwise; to; decrease
• Page 29 – VernathermTM Thermostatic Mixing Valve (S01-52