Page 3 - Table of Contents; Important Safety Instructions
AutoDome Power Supply Boxes Table of Contents | en 3 Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08 Table of Contents 1 Important Safety Instructions 5 1.1 Safety precautions 5 1.2 Important safety instructions 6 1.3 Important Notices 8 1.4 UL certification 10 1.5 Bosc...
Page 4 - Cable and Wire Standards
4 en | Table of Contents AutoDome Power Supply Boxes F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc. 3 Cable and Wire Standards 24 3.1 Power 24 3.2 Wire Distance Guide 24 3.3 Video and Control Cables 25 3.3.1 Using Coaxial Cable to Transmit Video and Control 25 3.3.2 Us...
Page 5 - Safety precautions
AutoDome Power Supply Boxes Important Safety Instructions | en 5 Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08 1 Important Safety Instructions Read, follow, and retain all of the following safety instructions. Heed all warnings on the unit and in the operating instruc...
Page 6 - Important safety instructions; Object and liquid entry -
6 en | Important Safety Instructions AutoDome Power Supply Boxes F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc. 1.2 Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and i...
Page 7 - Damage requiring service -
AutoDome Power Supply Boxes Important Safety Instructions | en 7 Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08 6. Power sources - Operate the unit only from the type of power source indicated on the label. Before proceeding, be sure to disconnect the power from the ca...
Page 8 - Important Notices; National Electrical Code,
8 en | Important Safety Instructions AutoDome Power Supply Boxes F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc. 9. Replacement parts - Be sure the service technician uses replacement parts specified by the manufacturer, or that have the same characteristics as the orig...
Page 9 - Environmental statement -; Article; SELV
AutoDome Power Supply Boxes Important Safety Instructions | en 9 Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08 Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible. ...
Page 10 - UL certification; Circuit Television Equipment, UL 2044; Disclaimer; Bosch notices; Video loss
10 en | Important Safety Instructions AutoDome Power Supply Boxes F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc. 1.4 UL certification Disclaimer Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of t...
Page 11 - Copyright
AutoDome Power Supply Boxes Important Safety Instructions | en 11 Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08 Copyright This manual is the intellectual property of Bosch Security Systems and is protected by copyright. All rights reserved. Trademarks All hardware and...
Page 12 - Installing the Power Supply Box; Unpacking; Parts List; Note
12 en | Installing the Power Supply Box AutoDome Power Supply Boxes F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc. 2 Installing the Power Supply Box 2.1 Unpacking This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipme...
Page 13 - Description; VG5 Series AutoDome Installation; Tools Required; Pre-installation Check List; Section 3 Cable and Wire Standards, page 24
AutoDome Power Supply Boxes Installing the Power Supply Box | en 13 Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08 2.1.3 Description This chapter details how to install an AutoDome power supply box. Any variations to the installation procedures are noted. These power s...
Page 14 - Analog AutoDome; Section 3.4.2 Controlling the AutoDome via the RS232
14 en | Installing the Power Supply Box AutoDome Power Supply Boxes F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc. 3. Install all rough wiring including: power, control, video coax, alarms I/O, relay I/O, and fiber optic cabling. Refer to Section 3 Cable and Wire Stand...
Page 15 - Mount the Power Supply Box
AutoDome Power Supply Boxes Installing the Power Supply Box | en 15 Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08 2.3 Mount the Power Supply Box Before mounting the power supply box decide if you will be wiring the box through the holes in the bottom or back of the bo...
Page 16 - Attach Cover Door
16 en | Installing the Power Supply Box AutoDome Power Supply Boxes F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc. 5. Attach the 3/4 in. (20 mm) watertight pipe fittings (not supplied) to the holes of the power supply box through which you will run the power, video, an...
Page 18 - Route Wires and Attach Connectors; Section 3 Cable and; Methods for Routing Wires
18 en | Installing the Power Supply Box AutoDome Power Supply Boxes F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc. 2.4 Route Wires and Attach Connectors Power wires must be routed to the left (front) side of the power supply box through a separate conduit. All video, c...
Page 19 - Power In
AutoDome Power Supply Boxes Installing the Power Supply Box | en 19 Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08 Figure 2.3 VG4-A-PSU1 or VG4-A-PSU2 Power Supply Box 1 24/120/230 VAC Power In 5 Coax, UTP Video, or Ethernet Wire (Ethernet for VG5 700 Series only) 2 P1...
Page 20 - Pipe Interface Board
20 en | Installing the Power Supply Box AutoDome Power Supply Boxes F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc. – The second method is to bypass the power supply box and route the video, control, and alarm wires directly to the AutoDome Arm Mount, Pipe Mount, or to ...
Page 21 - Wiring the Power Supply Box; Section 3 Cable and Wire Standards,; IP AutoDome
AutoDome Power Supply Boxes Installing the Power Supply Box | en 21 Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08 2.4.2 Wiring the Power Supply Box 1. Route the high voltage 115/230 VAC lines through the conduit fitting on the left side of the box. or Route the 24 VAC...
Page 22 - Power Supply Box Connections; Fuse Specifications
22 en | Installing the Power Supply Box AutoDome Power Supply Boxes F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc. 2.4.3 Power Supply Box Connections The following figure is a detailed illustration of the power supply box, which includes the fuse specifications. 1 Grou...
Page 23 - The following table lists the Power Supply Box connectors:; Connector
AutoDome Power Supply Boxes Installing the Power Supply Box | en 23 Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08 The following table lists the Power Supply Box connectors: Table 2.1 Power Box Connections No. Connector Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Ground Ground...
Page 24 - Power; 4 V to AutoDome; Watts
24 en | Cable and Wire Standards AutoDome Power Supply Boxes F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc. 3 Cable and Wire Standards 3.1 Power 3.2 Wire Distance Guide CAUTION! Installation should only be performed by qualified service personnel in accordance with the...
Page 25 - Video and Control Cables; Using Coaxial Cable to Transmit Video and Control; Cable
AutoDome Power Supply Boxes Cable and Wire Standards | en 25 Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08 3.3 Video and Control Cables 3.3.1 Using Coaxial Cable to Transmit Video and Control Coaxial cable terminated with BNC connectors is the most common method for t...
Page 26 - Using UTP to Transmit Video and Control; Cable Compensation
26 en | Cable and Wire Standards AutoDome Power Supply Boxes F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc. 3.3.2 Using UTP to Transmit Video and Control Unshielded twisted pair (UTP) cable terminated with RJ45 male connectors are used to transmit composite video using...
Page 27 - Using Ethernet to Transmit Video and Control; Multimode
AutoDome Power Supply Boxes Cable and Wire Standards | en 27 Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08 3.3.3 Using Ethernet to Transmit Video and Control The AutoDome VG5 700 series connects to a 10 Base-T/100 Base-TX network either directly or via a switch. Both ...
Page 28 - VG4-SFPSCKT Fiber Optic Media Converter; Ethernet Media Converter
28 en | Cable and Wire Standards AutoDome Power Supply Boxes F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc. 3.3.5 Using a Fiber Optic Ethernet Media Converter to Transmit Video and Control The fiber optic media converter kit, available for AutoDome 700 Series cameras, ...
Page 29 - Controlling the AutoDome via Biphase; Cable Type
AutoDome Power Supply Boxes Cable and Wire Standards | en 29 Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08 3.4 Control-only Cables 3.4.1 Controlling the AutoDome via Biphase (Shielded 2-wire, half-duplex, multi-drop, 5000 ft. cable limit) Biphase is the standard Bosch...
Page 30 - Controlling the AutoDome via the RS232 Protocol
30 en | Cable and Wire Standards AutoDome Power Supply Boxes F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc. In a daisy chain configuration, where multiple domes are connected in series, the 100 Ω resistor must be removed from all but the last dome. You can daisy chain ...
Page 31 - Wire Type
AutoDome Power Supply Boxes Cable and Wire Standards | en 31 Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08 Figure 3.4 Connections for RS232 Operation Figure 3.5 Position of CPU Switch for RS232 Operation (camera module not shown for clarity) Note: To access the CPU sw...
Page 32 - Controlling the AutoDome via the RS485 Protocol; not
32 en | Cable and Wire Standards AutoDome Power Supply Boxes F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc. 3.4.3 Controlling the AutoDome via the RS485 Protocol 2-wire (shielded), half-duplex, differential, multi-drop (32 nodes), 4000 ft cable limit) RS485 is capable ...
Page 34 - Configuring the VG5 AutoDome
34 en | Cable and Wire Standards AutoDome Power Supply Boxes F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc. 3.5 Fiber Optic Module with an RS232/RS422 Controller An AutoDome with a fiber optic module is prewired to operate with Biphase signals only. This section descri...
Page 36 - Audio Cables; Audio Line Input Specifications
36 en | Cable and Wire Standards AutoDome Power Supply Boxes F.01U.250.895 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc. 11. Return the bubble to the AutoDome housing. 12. Return power to the power supply box. 3.6 Audio Cables The VG5 700 Series AutoDome is capable of receiving lin...
Page 37 - Audio Connections; VG5 700 Series AutoDome User Manual
AutoDome Power Supply Boxes Cable and Wire Standards | en 37 Bosch Security Systems, Inc. Installation Guide F.01U.250.895 | 1.0 | 2011.08 Audio Connections 1. Remove the 100 Ω termination resistor from the Biphase terminals. 2. Connect the audio line level source to the Biphase C+ input terminal. 3...
