Bosch SCD110 - User Manual

SCD110 Quick Start Guide

EN

Quickstart Guide

A full description is available at:

https://www.bosch-connectivity.com/products/sense-connect-detect

Connecting to the SCD

1.

Start the SCD Sensor App. You will find the SCD Sensor App in your Apple App Store

or Google Play free of charge.

2.

Activate Bluetooth on your smartphone.

3.

To activate the SCD, press the button on the device for 1 to 3 seconds.

4.

To find the visible SCDs in range, tap “Search for devices”.

5.

Choose the SCD and follow the instructions on your smartphone to finalize pairing.

Configuring the SCD

To configure your app, follow the steps shown in the app.

Convention for Characters

Only certain characters can be used for an email address and the device name.

▶ The following characters are permitted: [A-Z][a-z][0-9][@.,;/\|+-*_]

Notice

The streaming function transmits sensor values at a fixed rate to the app.

Values can be visualized and recorded in the “View” tab. To start streaming,

select the “Streaming” button.

1 - 3 s

The logging function stores raw data in the SCD internal memory. Data can

be later transmitted to the SCD app. To configure and start logging, select the

“Logging” button in the app.

The threshold function monitors the streamed or logged values and triggers

alarms on BLE accordingly, if values are out of a defined range. To configure

the thresholds, go to the “Thresholds” tab.

Transferring data

Connect your smartphone with the SCD using the SCD app. To download

existing data in the SCD, go to the “Logging” tab and select “Download”.

Data transfer

▶ The downloading process may take several minutes. Logging is stopped

in order to proceed with the transfer.

Notice

Lithium battery!

The device contains a lithium battery. Handling the battery incorrectly could cause

a fire.

▶ Read and follow the valid transportation regulations, if necessary.

Caution

Forfeiting the warranty!

Opening the casing without authorization could present risks to the user and will

void any warranty.

▶ Do not open the housing.

Notice

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

COMPONENT: TI-RTOS

Copyright (c) 2012, Texas Instruments Incorporated
All rights reserved.
Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this

list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice,

this list of conditions and the following disclaimer in the documentation and/

or other materials provided with the distribution.
Neither the name of Texas Instruments Incorporated nor the names of its

contributors may be used to endorse or promote products derived from this

software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND

CONTRIBUTORS „AS IS“ AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

COMPONENT: SYS/BIOS

Copyright (c) 2012, Texas Instruments Incorporated
All rights reserved.
Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this

list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice,

this list of conditions and the following disclaimer in the documentation and/

or other materials provided with the distribution.
Neither the name of Texas Instruments Incorporated nor the names of its

contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND

CONTRIBUTORS „AS IS“ AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

COMPONENT: CC26XXWARE DRIVERLIB

Copyright (c) 2014, Texas Instruments Incorporated

All rights reserved.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are met:

1) Redistributions of source code must retain the above copyright notice,

this list of conditions and the following disclaimer.

2) Redistributions in binary form must reproduce the above copyright notice,

this list of conditions and the following disclaimer in the documentation

and/or other materials provided with the distribution.

3) Neither the name of the ORGANIZATION nor the names of its contributors

may be used to endorse or promote products derived from this software

without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND

CONTRIBUTORS „AS IS“ AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

16

17

18

1

2

3