Page 3 - Table of Contents; Safety
MIC612 Thermal Camera Table of Contents | en 3 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 Table of Contents 1 Safety 6 1.1 About this Manual 6 1.2 Conventions in this Manual 6 1.3 Legal Information 6 1.4 Important Safety Instructions 6 1.5 EC Directives 8 1.6 Impo...
Page 4 - Operation of the Thermal Camera
4 en | Table of Contents MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 5.4 Setting the Addresses of the Two Cameras of the MIC612 33 5.4.1 Setting the Address of the Optical Camera via FastAddress 34 5.4.2 FastAddress, Bosch Protocol 34 5.4.3 Fa...
Page 5 - Maintenance and Troubleshooting; Index
MIC612 Thermal Camera Table of Contents | en 5 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 10.4 Pre-position Tour 64 10.5 Azimuth, Elevation, and Compass Directions 64 10.5.1 Setting the Azimuth Zero Point 64 10.5.2 Displaying Azimuth, Elevation, and Compass Headin...
Page 6 - About this Manual; Copyright; Important Safety Instructions
6 en | Safety MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 1 Safety 1.1 About this Manual This manual has been compiled with great care and the information it contains has been thoroughly verified. The text was complete and correct at the time ...
Page 8 - EC Directives; Environmental statement -; Important Notices; Object and liquid entry -
8 en | Safety MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 8. Do not point the camera at the sun. Bosch Security Systems will not be liable for any damage to cameras that have been pointed directly at the sun. 9. Do not back drive the pan or ti...
Page 9 - Grounding and polarization -
MIC612 Thermal Camera Safety | en 9 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 – For 18 VAC units, voltage applied to the unit's power input should not exceed ±10%. User-supplied wiring must comply with local electrical codes (Class 2 power levels). Do not ground ...
Page 10 - FCC and ICES Compliance
10 en | Safety MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 1.7 FCC and ICES Compliance FCC ET ICES INFORMATION (commercial applications) (U.S.A. and Canadian Models Only, CLASS A) This device complies with part 15 of the FCC Rules . Operation ...
Page 11 - Bosch Notices; Customer Support and Service
MIC612 Thermal Camera Safety | en 11 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 Au besoin, l’utilisateur consultera son revendeur ou un technicien qualifié en radio/télévision, qui procédera à une opération corrective. La brochure suivante, publiée par la Commissi...
Page 12 - Unpacking; Parts List
12 en | Unpacking MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 2 Unpacking – This equipment, although ruggedized, should be unpacked and handled with care. Check the exterior of the packaging for visible damage. If an item appears to have been ...
Page 13 - Installation Overview
MIC612 Thermal Camera Installation Overview | en 13 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 3 Installation Overview The MIC Series cameras are designed for easy installation on a variety of common fittings. The most common type of mount used is a dedicated CCTV...
Page 14 - Typical Mounting Arrangements; Number Description
14 en | Installation Overview MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 3.1 Typical Mounting Arrangements Below are examples of typical mounting arrangements for MIC Series cameras. Figure 3.2 Typical pole mount (showing Pole Mount Bracket (...
Page 15 - Mounting Positions
MIC612 Thermal Camera Installation Overview | en 15 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 Figure 3.4 Typical corner mount (from left to right: Wall Mount Bracket (MIC-WMB), Shallow Conduit Adapter (MIC-SCA), and Corner Mount Bracket (MIC-CMB)) 3.2 Mounting Po...
Page 16 - About the MIC Shielded Composite Cable; About Alarm Inputs and Outputs; Alarm Card
16 en | Installation Overview MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 3.3 About the MIC Shielded Composite Cable MIC shielded composite cables are multi-conductor cables of various lengths (and gauges ranging from 14 - 18) that provide all...
Page 17 - Installation; Typical Installation Configurations
MIC612 Thermal Camera Installation | en 17 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 4 Installation 4.1 Typical Installation Configurations Example 1: Configuration with Bosch Biphase protocol connection, which requires MIC-BP3or MIC-BP4 (sold separately). Figure...
Page 18 - Overview of Installation Steps
18 en | Installation MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. Example 2: Configuration with RS-485 protocol connection Figure 4.2 MIC612 connected to a MIC power supply, which is connected to a head-end control system by RS-485. 4.2 Overvie...
Page 19 - Mounting the Camera
MIC612 Thermal Camera Installation | en 19 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 4.3 Mounting the Camera To mount a MIC Series camera, follow these steps: 1. Identify a secure location for the mount and for the camera. Locate the mounting position so that the...
Page 20 - Installing the MIC Power Supply Unit (PSU)
20 en | Installation MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. example, one of the securing bolts) to the camera’s outside case, and should be attached to the Earth terminal post on the PCD base of the camera. – If the system is copper throu...
Page 21 - Earth Link on PCB; Fuse Ratings
MIC612 Thermal Camera Installation | en 21 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 4.4.1 Earth Link on PCB The printed circuit board (PCB) has one Earth Link option, near terminal block HD1, to allow the PSU to be set up for different earthing schemes: – If the...
Page 22 - Layout of MIC Power Supply Units (PSUs) for MIC612; Number
22 en | Installation MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 4.4.3 Layout of MIC Power Supply Units (PSUs) for MIC612 The figure below displays the layout of the PCB in the MIC PSUs for non-IR cameras, with call- out numbers to the side of...
Page 23 - Installation Instructions; must be
MIC612 Thermal Camera Installation | en 23 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 4.4.4 Installation Instructions DANGER! – ELECTRICAL SHOCK HAZARD To reduce the risk of electrical shock, disconnect power before opening or working on any power supply unit. Pow...
Page 25 - PCB Marking Description
MIC612 Thermal Camera Installation | en 25 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 8. Remove the blanking plug. Install suitable (metal) conduit in place of the blanking plug. Secure the conduit as recommended by the conduit manufacturer. 9. Prepare the power c...
Page 28 - Commissioning the Camera with Heater Option Fitted; LED
28 en | Installation MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 29. After wiring is complete, connect the power supply to the power source. 30. Verify that the following LEDs are lit: 31. Re-attach the enclosure lid and tighten the four (4) c...
Page 30 - Getting Started; Establishing Control of the Camera; Establishing Control of the Camera via Biphase Protocol
30 en | Get ting Started MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 5 Getting Started Install and wire the camera according to the instructions in this manual and in the manuals that accompany the power supply and mounting devices. A typical ...
Page 31 - Powering On; Basic Keyboard Operation
MIC612 Thermal Camera Get ting Started | en 31 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 In Pelco Protocol Mode, the camera is configured from the factory for RS-485 operation. 1. Connect the controller's Tx terminals to the Tx terminals in the power supply box. ...
Page 32 - Keyboard Commands, Bosch Protocol; Keyboard Commands, Pelco Protocol
32 en | Get ting Started MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 5.3.2 Navigating the On-Screen Display (OSD) Menus The OSD menus provide access to the programmable settings of the camera. The OSD displays only the submenus that are applic...
Page 33 - Special Preset Commands, Pelco Protocol; Setting the Addresses of the Two Cameras of the MIC612
MIC612 Thermal Camera Get ting Started | en 33 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 5.3.5 Special Preset Commands, Pelco Protocol Some Pelco mode preset commands have a special meaning and override the normal Pelco preset function as follows: 5.4 Setting the...
Page 34 - Setting the Address of the Optical Camera via FastAddress; FastAddress
34 en | Get ting Started MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. The figure below illustrates the connection configuration of a MIC612, a matrix switcher, a monitor, and a keyboard. 5.4.1 Setting the Address of the Optical Camera via FastA...
Page 35 - FastAddress, Pelco Protocols
MIC612 Thermal Camera Get ting Started | en 35 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 – ON-998-ENTER : Displays and programs all cameras with or without an address in the system. – ON-997-ENTER : Displays the current address status of all cameras in the system...
Page 36 - Active Commands in FastAddress; Setting Passwords; Special Passwords; Configuring the Camera for Inverted Operation
36 en | Get ting Started MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 5. Use the joystick to enter the unique identifier for the camera. – Move the joystick up or down to select the number. – Move the joystick right to move to the next number p...
Page 38 - Camera Setup Menu
38 en | On-Screen Display (OSD) Menus (Bosch Protocol) MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 6.1 Camera Setup Menu The Camera Setup Menu contains settings that can be changed/customized for the optical (visible) camera. White Bal Maintai...
Page 40 - Thermal Camera Setup Menu
40 en | On-Screen Display (OSD) Menus (Bosch Protocol) MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 6.2 Thermal Camera Setup Menu The Thermal Camera Setup Menu contains settings that can be changed for the thermal camera. Thermal Mode Adjusts t...
Page 41 - Lens Setup Menu
MIC612 Thermal Camera On-Screen Display (OSD) Menus (Bosch Protocol) | en 41 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 6.3 Lens Setup Menu The Lens Setup Menu contains lens settings that can be changed/customized. Auto Focus Automatically focuses on the subject i...
Page 42 - PTZ Setup Menu
42 en | On-Screen Display (OSD) Menus (Bosch Protocol) MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 6.4 PTZ Setup Menu The PTZ Setup Menu contains pan/tilt/zoom settings that can be changed/customized. AutoPan Adjusts speed of camera during Aut...
Page 43 - Display Setup Menu
MIC612 Thermal Camera On-Screen Display (OSD) Menus (Bosch Protocol) | en 43 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 Autopivot Automatically rotates the camera 180º when following a subject traveling directly beneath the camera. Options: ON (default setting), O...
Page 45 - Communication Setup Menu
MIC612 Thermal Camera On-Screen Display (OSD) Menus (Bosch Protocol) | en 45 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 6.6 Communication Setup Menu The Communication Setup Menu contains baud rate and Bilinx control settings. AutoBaud Turns on AutoBaud detection, ...
Page 46 - Alarm Setup
46 en | On-Screen Display (OSD) Menus (Bosch Protocol) MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 6.7 Alarm Setup The Alarm Setup Menu contains alarm inputs, outputs and rules. Multi Alarm Setup Allows setup of multiple alarms. Options: On; O...
Page 49 - Language Menu
MIC612 Thermal Camera On-Screen Display (OSD) Menus (Bosch Protocol) | en 49 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 Input Toggles through a list of valid inputs set in the Alarm I/O Setup > Inputs Setup Menu that define the rule's inputs. A rule can have up...
Page 50 - Diagnostics Menu
50 en | On-Screen Display (OSD) Menus (Bosch Protocol) MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 6.9 Diagnostics Menu The Diagnostics menu contains a list of diagnostic tools and events. Most of these menu items are display items only; you c...
Page 54 - Bosch Menu
54 en | On-Screen Display (OSD) Menus (Pelco Protocol) MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 7.1 Bosch Menu The Bosch Menu allows full access to the MIC612 main Setup Menu and all MIC612 configuration settings. Refer to Section 6 On-Scre...
Page 55 - PTZ Setup
MIC612 Thermal Camera On-Screen Display (OSD) Menus (Pelco Protocol) | en 55 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 Camera Setup Menu Choices: 7.3 PTZ Setup The Pelco PTZ Setup Menu provides access to the PTZ settings such as tours, scan speed, presets, limit ...
Page 56 - Other Menus
56 en | On-Screen Display (OSD) Menus (Pelco Protocol) MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. PTZ Setup Menu Choices: 7.4 Other Menus Menu Description Sub-menu / Description Default Setting Exit Exits the menu.? Edit Tour 1 Accesses the A...
Page 57 - Switching Video; Displaying Thermal Camera Temperature
MIC612 Thermal Camera Operation of the Thermal Camera | en 57 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 8 Operation of the Thermal Camera 8.1 Switching Video To switch Video Channel 2 between the optical (visible) camera and the thermal camera, enter the Thermal ...
Page 58 - Set the Temperature Threshold
58 en | Operation of the Thermal Camera MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 8.4 Triggering Alarms On Detection of Objects Outside of Set Thermal Temperature Threshold On models with the 35 mm thermal lens, you can set a High Temp Therm...
Page 59 - Common User Commands; Setting AutoPan Mode
MIC612 Thermal Camera Common User Commands | en 59 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 9 Common User Commands This chapter details common user commands. See Section A Keyboard Commands By Number, page 67 , for a complete list of commands. 9.1 Setting AutoPa...
Page 60 - Configuring Preposition Tours
60 en | Common User Commands MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. To clear a character from a title: 1. Use the joystick to highlight the Clear OR Position Character prompt. 2. Move the joystick left or right until the cursor is below t...
Page 61 - Recording Tours; Recorded Tour; Using the Wiper/Washer; To activate continuous wipe:
MIC612 Thermal Camera Common User Commands | en 61 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 9.6 Recording Tours The MIC612 can make up to two (2) recorded tours. A Recorded Tour saves all manual camera movements made during the recording, including its rate of p...
Page 62 - Advanced Features; Alarm Rules; Controlling Alarm Rules
62 en | Advanced Features MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 10 Advanced Features This chapter details advanced user commands, which are more complicated than those in Section 9 Common User Commands, page 59 . 10.1 Alarm Rules The MIC...
Page 63 - Privacy Masking
MIC612 Thermal Camera Advanced Features | en 63 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 Example 2: Advanced Alarm Rule Scenario: A MIC612 located at an airport is set to AutoPan Between Limits from the parking garage to the airport terminal. The gate entering t...
Page 64 - Image Stabilization; Main; Setting the Azimuth Zero Point; Azimuth Range Compass Direction
64 en | Advanced Features MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 10.3 Image Stabilization Image Stabilization becomes increasingly important as zoom ranges are extended. The advanced image stabilization algorithms of the MIC612 eliminate ...
Page 65 - Displaying Azimuth, Elevation, and Compass Headings
MIC612 Thermal Camera Advanced Features | en 65 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 10.5.2 Displaying Azimuth, Elevation, and Compass Headings You can display only the azimuth/elevation readings or only the compass reading, or you can display both readings ...
Page 66 - Problem
66 en | Maintenance and Troubleshooting MIC612 Thermal Camera F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 11 Maintenance and Troubleshooting The unit contains no user-serviceable parts. Maintenance and repair of this equipment shall only be carried out by suitably ...
Page 67 - Keyboard Commands By Number
MIC612 Thermal Camera | en 67 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 A Keyboard Commands By Number A.1 Keyboard Commands (Bosch Protocol) A.1.1 Commands, Optical Camera Locked Function Key Command No. Command Description On/Off 1 Scan 360° / Auto Pan (Continuo...
Page 69 - Commands, Thermal Camera
MIC612 Thermal Camera | en 69 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 A.1.2 Commands, Thermal Camera On 99 Factory P/T Home Position Recalibrates home position; can be used as an Alarm Output. On/Off 100 Record A Activates/deactivates recording A. On/Off 101 Re...
Page 71 - Keyboard
MIC612 Thermal Camera | en 71 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 A.2 Keyboard Commands (Pelco Protocol) Set/Shot 102 Autopan Right Limit Set–Programs right limit. Shot–Shows limit. Set/Shot 103 Lock Commands Locks commands. Set/Shot 104 Unlock Commands Unl...
Page 73 - Symbols
MIC612 Thermal Camera Index | en 73 Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09 Index Symbols #-ENTER 35 Numerics 33-PRESET 33 34-PRESET 33 81-PRESET 33 82-PRESET 33 92-PRESET 33 93-PRESET 33 94-PRESET 33 95-PRESET 33 , 53 96-PRESET 33 97-PRESET 33 99-PRESET 33 A a...
