Bosch ATM/POS Bridge - Manual

Page 3 - Installation manual

Bosch Security Systems ATM/POS bridge | Installation Manual iii ATM/POS Bridge Installation manual

Page 4 - IMPORTANT SAFETY INSTRUCTIONS

Bosch Security Systems ATM/POS bridge | Installation Manual iv IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilat...

Page 6 - Bosch Security Systems

Bosch Security Systems ATM/POS bridge | Installation Manual vi

Page 7 - English; Table of Contents

Bosch Security Systems ATM/POS bridge | Installation Manual EN | 1 English ATM/POS bridge Table of Contents 1. ATM/POS bridge ................................................................................................... 31.1 Package contents .......................................................

Page 8 - Eng; SAFETY PRECAUTIONS; CAUTION

Bosch Security Systems ATM/POS bridge | Installation Manual EN | 2 Eng lish SAFETY PRECAUTIONS This label may appear on the bottom of the unit due to space limitations. Attention: Installation should be performed byqualified service personnel only in accordance with theNational Electrical Code or ap...

Page 9 - Supported protocols

Bosch Security Systems ATM/POS bridge | Installation Manual EN | 3 English 1. ATM/POS bridge The ATM/POS bridge connects a Point-of-Sale (POS) or an Automatic Teller Machine (ATM) to a Bosch digital video recorder so that transactional data from these units can be stored and displayed with associate...

Page 13 - Configuration; How to set up a HyperTerminal session

Bosch Security Systems ATM/POS bridge | Installation Manual EN | 7 English 2. Configuration The ATM/POS bridge is configured via a PC HyperTerminal session. The PC is connected via a COM serial port to the COM 3 (console) port of the bridge. Start a HyperTerminal session on the PC to get access to t...

Page 14 - Configuration menus

Bosch Security Systems ATM/POS bridge | Installation Manual EN | 8 Eng lish 5. If the bridge is switched on, a welcome message is shown on the screen. This message prompts you to press the F1 key (a function key on your keyboard). 6. Press the F1 key; the screen displays the System Options Menu.7. T...

Page 17 - Connectors

Bosch Security Systems ATM/POS bridge | Installation Manual EN | 11 English 3. Connectors The four COM connectors are all 9-pin SubD-type male connectors. The following table lists the signals and pin numbers for the four ports. Pin COM 1 RS 232 COM 2 RS 232 COM 3 (console) RS 232 COM 4 RS 485 1 2 R...

Page 18 - Troubleshooting

Bosch Security Systems ATM/POS bridge | Installation Manual EN | 12 Eng lish 4. Troubleshooting If you are unable to capture transaction data, perform the following steps: 1. Recheck your cables.2. Check your TCP/IP network connection with the ATM/POS bridge. Check your gateway and subnet mask setti...

Page 19 - Technical specifications

Bosch Security Systems ATM/POS bridge | Installation Manual EN | 13 English 5. Technical specifications Electrical Power supply: External DC power supply (supplied) Input: 100-240 VAC; 150mA, 50/60Hz Output: 12 VDC; 450mA Connector: DC jack, positive center pin; 10-30 VDC; 2W Mechanical Dimensions: ...

Bosch ATM/POS Bridge - Manual

Table of Contents:

Summary

Other Bosch Models