Bosch ATM/POS Bridge - Manuals

Bosch Security Systems ATM/POS bridge | Installation Manual EN | 1 English ATM/POS bridge Table of Contents 1. ATM/POS bridge ................................................................................................... 31.1 Package contents .......................................................

Bosch Security Systems ATM/POS bridge | Installation Manual EN | 2 Eng lish SAFETY PRECAUTIONS This label may appear on the bottom of the unit due to space limitations. Attention: Installation should be performed byqualified service personnel only in accordance with theNational Electrical Code or ap...

Bosch Security Systems ATM/POS bridge | Installation Manual EN | 3 English 1. ATM/POS bridge The ATM/POS bridge connects a Point-of-Sale (POS) or an Automatic Teller Machine (ATM) to a Bosch digital video recorder so that transactional data from these units can be stored and displayed with associate...

Bosch Security Systems ATM/POS bridge | Installation Manual EN | 7 English 2. Configuration The ATM/POS bridge is configured via a PC HyperTerminal session. The PC is connected via a COM serial port to the COM 3 (console) port of the bridge. Start a HyperTerminal session on the PC to get access to t...

Bosch Security Systems ATM/POS bridge | Installation Manual EN | 8 Eng lish 5. If the bridge is switched on, a welcome message is shown on the screen. This message prompts you to press the F1 key (a function key on your keyboard). 6. Press the F1 key; the screen displays the System Options Menu.7. T...

Bosch Security Systems ATM/POS bridge | Installation Manual EN | 11 English 3. Connectors The four COM connectors are all 9-pin SubD-type male connectors. The following table lists the signals and pin numbers for the four ports. Pin COM 1 RS 232 COM 2 RS 232 COM 3 (console) RS 232 COM 4 RS 485 1 2 R...

Bosch Security Systems ATM/POS bridge | Installation Manual EN | 12 Eng lish 4. Troubleshooting If you are unable to capture transaction data, perform the following steps: 1. Recheck your cables.2. Check your TCP/IP network connection with the ATM/POS bridge. Check your gateway and subnet mask setti...

Bosch Security Systems ATM/POS bridge | Installation Manual EN | 13 English 5. Technical specifications Electrical Power supply: External DC power supply (supplied) Input: 100-240 VAC; 150mA, 50/60Hz Output: 12 VDC; 450mA Connector: DC jack, positive center pin; 10-30 VDC; 2W Mechanical Dimensions: ...