Blodgett KTT-DS - Manual
Blodgett KTT-DS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT NOTES FOR INSTALLATION AND OPERATION; This manual should be retained for future reference.
- Page 4 – SERVICE CONNECTIONS; DIMENSIONS
- Page 6 – INSTALLATION INSTRUCTIONS; kettle. Note that one valve will handle a series of kettles.
- Page 7 – OPERATING PROCEDURES; Fill kettle with product to desired level.
- Page 8 – CLEANING PROCEDURES; Your kettle should be cleaned immediately after each use.; PREVENTIVE MAINTENANCE; WARNING
1
KTT-DS Series
DIRECT STEAM TABLE TOP TILTING KETTLE
INSTALLATION – OPERATION
–
MAINTENANCE
BLODGETT OVEN COMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, Vermont 05401 USA Telephone (800) 331-5842, (802) 860-3700 Fax: (802) 864-0183
S00056 Rev A (5/04)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 IMPORTANT NOTES FOR INSTALLATION AND OPERATION It is recommended that this manual be read thoroughly and that all instructions be followedcarefully. This is the safety alert symbol. It is used to alert you to potentialpersonal injury hazards. Obey all safety messages that follow thissymbol to avoi...
4 1.0 SERVICE CONNECTIONS P J K L POUR PATH F H N M C O D B R S E G Q DIMENSIONS ARE IN INCHES [MM]. S R 7.5 DIMENSIONS MODEL KTT-6DS KTT-10DS KTT-12DS CAPACITY 6 gallons 23 litres 38 litres 10 gallons 46 litres 12 gallons UNITS inches inches inches mm mm mm 14.5 406 406 16 16 305 A 12 381 15 368 B ...
6 3.0 INSTALLATION INSTRUCTIONS 1. These kettles must be installed on a suitable table or counter top. 2. On counter top make 7/8" holes at 13 - 3/4" centers for kettle legs on Models KTT-6DS, KTT-10DS, KTT-12DS and 12, 23-1/2" centers on Model KTT-20DS. Provide sufficientspace from rear...
