Blodgett KLT-DS - Manual
Blodgett KLT-DS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – SERVICE CONNECTIONS – KLT-DS; DIMENSIONS
- Page 5 – SERVICE CONNECTIONS – KPT-DS
- Page 6 – INSTALLATION INSTRUCTIONS; strainer fairly convenient to the kettle.
- Page 8 – OPERATING INSTRUCTIONS; Fill kettle with product to desired level.; CLEANING INSTRUCTIONS; CAUTION: Do not use cleaning agents that are corrosive.; Wipe the exterior of the kettle with a clean, damp cloth.
- Page 9 – DRAW-OFF VALVE CLEANING; Leave the draw-off valve open when the kettle is not in use.; DAIRY DRAW-OFF VALVE CLEANING; Use a soft cloth or soft brush and clean all surfaces.; WHAT TO DO IF SURFACE RUST APPEARS
1
KLT-DS and KPT-DS Series
DIRECT STEAM TRI-LEG TILTING KETTLE AND
DIRECT STEAM PEDESTAL TILTING KETTLE
INSTALLATION – OPERATION
–
MAINTENANCE
BLODGETT OVEN COMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, Vermont 05401 USA Telephone (800) 331-5842, (802) 860-3700 Fax: (802) 864-0183
S00057 Rev B (6/06)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
4 SERVICE CONNECTIONS – KLT-DS FLANGED FOOT DETAIL 4 7/16" [11mm] HOLES ON 3 [76] B.C. EQUALLY SPACED Ø DIMENSIONS ARE IN INCHES [MM] S KLT-30DS KLT-60DS KLT-20DS KLT-100DS KLT-80DS B C D E K 70° SPRING ASSISTED COVER - OPTIONAL JACKET DRAIN VALVE 31.5 28.5 DIMENSIONS MODEL KLT-40DS CAPACITY 20 ...
5 SERVICE CONNECTIONS – KPT-DS VIEW A-A 4X Ø7/16 [11] EQ. SPACED ON 16.62 [422] B.C. (20 TO 60 GALLONS) ON 19.62 [498] B.C. (80 GALLONS) S 45° SAFETY RELIEF VALVE STEAM TRAP AND STRAINER (OPTIONAL) ØA 4 [10 2] 7.38 [187] K H FAUCET (OPTIONAL) 2"or 3" TANGENT DRAW OFF VALVE (OPTIONAL) 6.25 [1...
6 1.0 INSTALLATION INSTRUCTIONS 1. Select a location to provide drainage for kettle pour path when tilted and for draw-off valve if so equipped. 2. Mark hole locations through flanged adjustable feet on KLT-DS models and through pedestal base on KPT-DS models. Remove kettle. 3. On hole locations mar...
