Page 2 - Samsung Electronics; -1 Safety Precautions; ) Before returning an instrument to the customer,
Samsung Electronics 1-1 1. Precautions 1-1 Safety Precautions 1) Before returning an instrument to the customer, always make a safety check of the entire instrument,including, but not limited to, the following items: (1) Be sure that no built-in protective devices are defective or have been defeated...
Page 3 - Precautions
Precautions 1-2 Samsung Electronics 2) Read and comply with all caution and safety re- lated notes non or inside the cabinet, or on the chas-sis. 3) Design Alteration Warning-Do not alter of add to the mechanical or electrical design of this instru-ment. Design alterations and additions, includingbu...
Page 4 - -2 Servicing Precautions
Precautions Samsung Electronics 1-3 1-2 Servicing Precautions CAUTION : Before servicing Instruments covered by this service manual and its supplements, read andfollow the Safety Precautions section of this manual. Note : If unforseen circument create conflict between the following servicing precaut...
Page 5 - Electrostatically Sensitive Devices (ESD); (1) Immediately before handling any semiconductor
Precautions 1-4 Samsung Electronics 1-3 ESD Precautions Electrostatically Sensitive Devices (ESD) Some semiconductor (solid state) devices can be dam-aged easily by static electricity.Such components commonly are called Electrostati-cally Sensitive Devices(ESD). Examples of typical ESDdevices are in...
Page 8 - Reference Information
Samsung Electronics 2-1 2. Reference Information 2-1 IC Dsecriptions 2-1-1 AIC1 (AK4324 ; Digital-to-Analog Converter) Serial Input Interface De-emphasis Control 8X Interpolator 8X Interpolator ∆ ∑ Modulator SCF SCF ∆ ∑ Modulator Clock Divider DIF0 DIF1 DIF2 DEM0 DEM1 AVDD AVSS VREF DVSS DVDD CKS MC...
Page 9 - Reference Information
Reference Information 2-2 Samsung Electronics 2-1-2 RIC1 (KS1461 ; RF) 100 99 98 97 96 95 94 93 92 91 90 VZOCTL PLLGF EQF EQG RDPF AGCP AGCB AGCLEVEL EQGND AGCI AGCC 89 RFAGCO 88 EQIN 87 BCA TH 86 RFEQO 85 EQVCC 84 MIRRI 83 CP 1 81 MROFST 80 RFRPN 82 CB 1 78 CP 2 77 CB 2 76 RFCT 79 RFRP 75 BCAO 74 B...
Page 13 - TO DRAM
Reference Information 2-6 Samsung Electronics 2-1-4 DIC1 (KS1453 ; DVD Data Processor) X'T AL & TIMING GEN RFCK 17.58/7.35KHz DVD CL V/CA V CD CL V/CA V M 23BIT SR 26.16MHz 32BIT SR 16-8 DEMOD ECSY FRAME SYNC DET/PROT/INS (17.57KHz) (6, 4, 3) efmwr ID ECC WFCK 17.58/7.35KHz M VCO TIMING GENERA T...
Page 15 - N A M E; BLOCK DIAGRAM; F U N C T I O N
Reference Information 2-8 Samsung Electronics 2-1-5 DIC2 (KM416C254BJ-6 ; CMOS DRAM) N A M E A 0 - A 8 D Q 0 - 1 5 V S S R A S U C A S L C A S W O E V C C N . C BLOCK DIAGRAM Control Clocks VBB Generator Lower Data in Buffer DQ0 to DQ7 OE DQ8 to DQ15 Lower Data out Buffer Upper Data in Buffer Upper ...
Page 21 - NAME; Vss; TOP VIEW; FUNCTION
Reference Information 2-14 Samsung Electronics 2-1-9 MIC8 (M27C801 ; 8MB (1M x 8-bit) CMOS EPROM) NAME A0-A19 CE DQ0-DQ7 OE Vcc Vss 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 A16 A15 A12 A7 A6 A5 A4 A3 A2 A1 A0 DQ0 DQ1 DQ2 Vss Vcc A17 A14 A13 A8 A9 A11 OE/VPP A10 CE DQ7 DQ6 DQ4 DQ4 DQ3 32 31 30 29 28 27...
Page 23 - MEMO
Reference Information 2-16 Samsung Electronics MEMO
Page 24 - Product Specifications; GENERAL; NTSC
Samsung Electronics 3-1 3. Product Specifications Power Requirements AC 120V, 60Hz Power Consumption DVD-909 ; 19W, DVD-709 ; 17W GENERAL Weight 7.5lbs Dimensions W 16.9 in X D 11.0 in X H 3.5 in Operating Temperature Range +41°F ~ +95°F Operating Humidity Range 10% to 75% DVD Reading Speed : 11.45 ...
Page 25 - Product Specification; P A L
Product Specification 3-2 Samsung Electronics Power Requirements AC 110V ~ 240V, 50/60Hz Power Consumption DVD-909 ; 19W, DVD-709 ; 17W GENERAL Weight 3.4Kg Dimensions W 430mm X D 280mm X H 89mm Operating Temperature Range +5°C ~ 35°C Operating Humidity Range 10% ~ 75% DVD Reading Speed : 3.49m/sec....
Page 26 - Operating Instructions; escription-Front Panel; escription-Front Panel
Samsung Electronics 4-1 4. Operating Instructions 4-1 NTSC (DVD-909/709) Front Panel Controls D escription-Front Panel DVD-909 Front Display ST ANDBY LAMP • When the unit is first plugged in, the indi- cator lights. When power is pressed on, the lamp goes out. POWER • Use to turn the power on and of...
Page 27 - Operating Instructions
Operating Instructions 4-2 Samsung Electronics OPTICAL COAXIAL DIGIT AL AUDIO OUT ANALOG AUDIO OUT MIXED AUDIO OUT VIDEO OUT S-VIDEO OUT V1 V2 COMPONENT VIDEO OUT Y Pb Pr R FRONT L R SURROUND L CENTER R1 R2 L1 L2 S/W D escription-Rear Panel DVD-909 Rear Panel DIGIT AL AUDIO OUT JACK • Use either an ...
Page 28 - Tour of the Remote Contr
Operating Instructions Samsung Electronics 4-3 A Tour of the Remote Contr ol DVD Function Buttons DVD POWER Button NUMBER Buttons OPEN/CLOSE Button SETUP Button • Brings up the DVD player ’s Setup menu. ZOOM Button SEARCH Buttons • Allows you to search forward/backward through a disc. ST OP Button S...
Page 29 - hoosing a Connection; TV
Operating Instructions 4-4 Samsung Electronics C hoosing a Connection The following show examples of connections commonly used to connect the DVD player with a TV and other components. DVD-909 Before Connecting the DVD Player Connecting to a TV (For V ideo) MIXED AUDIO OUT R1 R2 L1 R L L2 COMPONENT ...
Page 31 - ont Panel
Operating Instructions 4-6 Samsung Electronics OPEN/ CLOSE POWER ST ANDBY PHONE ADVANCED DOLBY DIGITAL DECODER BUILT-IN LEVEL SKIP MIN MAX OPEN/ CLOSE OPEN/ CLOSE DIGITAL VIDEO SP A TIALIZER N-2-2 DVD/VIDEO-CD/CD PLAYER DVD-909 D escription-Fr ont Panel Front Panel Controls DVD-909 Front Display ST ...
Page 32 - SCAR
Operating Instructions Samsung Electronics 4-7 OPTICAL COAXIAL DIGIT AL AUDIO OUT ANALOG AUDIO OUT MIXED AUDIO OUT R FRONT L R SURROUND L CENTER R1 R2 L1 L2 S/W VIDEO OUT S-VIDEO OUT V1 V2 TV SYSTEM SELECT NTSC SECAM P AL AV1 AV2 D escription-Rear Panel DVD-909 Rear Panel DIGIT AL AUDIO OUT JACK • U...
Page 33 - COMPONENT VIDEO RCA JACK
Operating Instructions 4-8 Samsung Electronics DIGITAL AUDIO OUT ANALOG AUDIO OUT OPTICAL COAXIAL R L CENTER R1 R2 FRONT MIXED ADUIO OUT V1 V2 VIDEO OUT S-VIDEO OUT TV SYSTEM SELECT L1 L2 Pr Pb COMPONENT VIDO OUT Y R L SW SURROUND NTSC SECAM P AL D escription-Rear Panel DVD-909 Rear Panel DIGIT AL A...
Page 39 - system select
Operating Instructions 4-14 Samsung Electronics TV SYSTEM SELECT NTSC SECAM P AL TV system select Y ou can enjoy NTSC or P AL encoded discs by using your TV SYSTEM SELECT switch to choose the appro - priate system. • Only when you playback P AL-encoded DVD with NTSC-TV . The play - er can not playba...
Page 40 - Disassembly and Reassembly; ) Supply power and open Tray; Note; doesnÕt open, insert a Screw driver
Samsung Electronics 5-1 5. Disassembly and Reassembly 5-1 Cabinet and PCB 5-1-1 Door-Tray Removal 1) Supply power and open Tray Œ . 2) Disassemble the Door-Tray ´ in direction of arrow ÒAÓ. 3) Close Tray Œ and power off. Note : If Tray Œ doesnÕt open, insert a Screw driver ¨ into the Emergency hole ...
Page 41 - Disassembly/Reaasembly; on the back Top Cabinet.
5-2 Samsung Electronics Disassembly/Reaasembly 5-1-2 Top Cabinet Removal 1) Remove 3 Screws Œ on the back Top Cabinet. 2) Remove 2 Screws ´ , ˇ on the left and right side. 3) Lift up the Top Cabinet in direction of arrow. Œ 3 SCREWS ´ 1 SCREW ˇ 1 SCREW Fig. 5-2 Top Cabinet Removal
Page 43 - and AssÕy Front Panel
5-4 Samsung Electronics Disassembly/Reaasembly Œ 2 SCREWS ˇ 2 SCREWS ˆ 3 SCREWS ´ ASS'Y FRONT-PANEL ¨ POWER PCB Ø PLAY PCB Fig. 5-4 Ass’y Front-Panel, Power PCB, Play PCB Removal (DVD-709) 5-1-4 Ass’y Front-Panel, Power PCB, Play PCB Removal (DVD-709) 1) Remove 2 Screws Œ and AssÕy Front Panel ´ . 2...
Page 44 - and 5 Screws
Disassembly/Reaasembly Samsung Electronics 5-5 Œ 4 SCREWS ˇ JACK PCB ˆ MAIN PCB ´ 5 SCREWS ¨ 3 SCREWS Fig. 5-5 Main PCB, Jack PCB Removal (DVD-909 ; Component Video RCA Jack Model) 5-1-5 Main PCB, Jack PCB Removal (DVD-909 ; Component Video RCA Jack Model) 1) Remove 4 Screws Œ and 5 Screws ´ . 2) Li...
Page 45 - and 1 Screw
5-6 Samsung Electronics Disassembly/Reaasembly Œ 4 SCREWS ˇ JACK PCB ˆ MAIN PCB ´ 1 SCREW ¨ 3 SCREWS Fig. 5-6 Main PCB, Jack PCB Removal (DVD-709 ; Component Video RCA Jack Model) 5-1-6 Main PCB, Jack PCB Removal (DVD-709 ; Component Video RCA Jack Model) 1) Remove 4 Screws Œ and 1 Screw ´ . 2) Lift...
Page 46 - and 6 Screws
Disassembly/Reaasembly Samsung Electronics 5-7 Œ 4 SCREWS ˇ JACK PCB ˆ MAIN PCB ´ 6 SCREWS ¨ 3 SCREWS Fig. 5-7 Main PCB, Jack PCB Removal (DVD-909 ; Scart Jack Model) 5-1-7 Main PCB, Jack PCB Removal (DVD-909 ; Scart Jack Model) 1) Remove 4 Screws Œ and 6 Screws ´ . 2) Lift up the Jack PCB ˇ . 3) Re...
Page 47 - and 3 Screws
5-8 Samsung Electronics Disassembly/Reaasembly Œ 4 SCREWS ˇ JACK PCB ˆ MAIN PCB ´ 3 SCREWS ¨ 3 SCREWS Fig. 5-8 Main PCB, Jack PCB Removal (DVD-709 ; Scart Jack Model) 5-1-8 Main PCB, Jack PCB Removal (DVD-709 ; Scart Jack Model) 1) Remove 4 Screws Œ and 3 Screws ´ . 2) Lift up the Jack PCB ˇ . 3) Re...
Page 50 - DIRECTION; -3 Connector Diagram
Disassembly/Reaasembly Samsung Electronics 5-11 NO. CONNECTOR NO. DIRECTION CONNECTOR NO. Œ CON23-A PHONE/POWER PCB JACK PCB CN18 ´ CN18 JACK PCB PHONE/POWER PCB CON23-A ˇ CON21 PLAY PCB JACK PCB CN15 ¨ CN15 JACK PCB PLAY PCB CON21 ˆ CN12 JACK PCB MAIN PCB CN7 Ø CN7 MAIN PCB JACK PCB CN12 ∏ CN11 JAC...
Page 53 - and disassemble the AssÕy-PCB deck
5-14 Samsung Electronics Disassembly/Reaasembly 5-4-2 Ass’y-Deck Sub Removal 1) Remove 2 Screws Œ and disassemble the AssÕy-PCB deck ´ . 2) Disassemble the AssÕy-Deck Sub ¨ in direction of arrow ÒBÓ, while simultaneously pushing the Hook ˇ in direction of arrow ÒAÓ. Fig. 5-14 Ass’y-Deck Sub Removal ...
Page 55 - SCREWS
5-16 Samsung Electronics Disassembly/Reaasembly 5-4-4 Ass’y-Brkt Deck Removal 1) Remove 4 Screws Œ . 2) Lift up the AssÕy-Brkt Deck ´ . Fig. 5-16 Ass’y-Brkt Deck Removal Œ 4 SCREWS ´ ASS'Y - BRKT DECK
Page 58 - Circuit Descriptions; Vs
Samsung Electronics 6-1 6. Circuit Descriptions 6-1 S.M.P.S. 6-1-1 Comparsion between Linear Power Supply and S.M.P.S. 6-1-1 (a) Linear Vreg Vout + – + + – Vs (Ns) Vp (Np) REGULATOR Common power (Ex.120/220V 50/60Hz) Fig. 6-1 Linear Power Supply 3 Waveform/Description Vs t 0 Fig. 6-2 Vs t 0 Fig. 6-3...
Page 59 - Circuit Descriptions
Circuit Descriptions 6-2 Samsung Electronics 3 Advantages and disadvantages of linear power supply 1) Advantages : Little noise because the output waveform of transformer is sine wave. 2) Disadvantages : ΠAdditional margin is required because Vs is chan- ged (depending on power source). (The regula...
Page 61 - PC09 : Adjust feedback response rate
Circuit Descriptions 6-4 Samsung Electronics 1) F/B terminal of PIC1 determines output duty cycle.2) C-E(Collector-Emitter) of PIC2 and F/B potential of PIC1 are same. 3 Operation descriptions 1) Internal OP-Amp Ô+Õ base potential of PIC3 is 2.5V and external Ò-Ó input potential is connected with PR...
Page 71 - -5 DVD Data Processor; CSTROBE
Circuit Descriptions 6-14 Samsung Electronics 6-5 DVD Data Processor 6-5-1 Outline DIC1(KS1453) performs Sync detection, EFM/EFM demodulation and error correction and Spindle motor control(CLV control) after inputting sliced EFM signal of RF signal at disc playback and EFM read clock (PLCK) signal g...
Page 74 - Demultiplexer
Circuit Descriptions Samsung Electronics 6-17 6-6-2 NTSC/PAL Digital Encoder (VIC50 : SAA7128) VIC50 inputted from pin4 with 27MHz generates HSYNC and VSYNC which are based on video signal. EachHSYNC and VSYNC outputted from Pin8 and Pin7 are inputted to Pin157 and Pin158 of A/V decoder VIC1(ZIVA-3)...
Page 77 - Fig. 6-25 Audio Decoder and Output Interface Datapath
Circuit Descriptions 6-20 Samsung Electronics 6-7-2 DVD Audio Output 1) Compressed Data The audio data inputted to VIC1 (ZiVA-3) A/V decoder is divided into compressed data and uncompressed data.It is compressed data that is compressed with multi-channel audio data such as Dolby digital, MPEG, DTS, ...
Page 78 - No Search Operation
Samsung Electronics 7-1 7. Troubleshooting No Search Operation PS0, PS1 is input SIC1-2, 3 terminal from SIC8-1, 7? Actual velocity occurs at SIC1-73 terminal? Actual velocity occurs at DRIC2-11, 12 terminal? Check SIC8 peripheral circuit. 0.1Vp-p sine wave occurs at search at SIC8-2, 6 terminal? Re...
Page 79 - Troubleshooting; Abnormal rotation of
Troubleshooting 7-2 Samsung Electronics Abnormal rotation of disc motor Input of RF signal is normal? (SIC1-59) SPD output is normal? (SIC1-74) After resoldering SIC1. DRIC1-24 output (FG) is normal? DRIC1-23 signal MON is "H" ? Check or replace disc motor. Check DIC1, MIC1. Check DRIC1 sold...
Page 80 - No Disc recognition
Troubleshooting Samsung Electronics 7-3 No Disc recognition LD is outputted from object lens at play key input? No focus incoming and no disc occurs. Yes No B A No focus incoming FE in SIC1-65 is within specified range? DRIC4-1, 2 output are normal? Check open state from DRIC4 to pick-up. Check RIC1...
Page 81 - No pick-up home positing
Troubleshooting 7-4 Samsung Electronics No pick-up home positing SELED FG Ps0, PS1 is input normally. (SIC1-2, 3) Check SIC1 soldering and power. Check SIC8, DRIC2 signal transfer system Yes No NO LD ON RIC1-28 is 5V? RIC1-29 output is 200mV? Current exceeds 0.1A? LD out pick-up replace. Open check ...
Page 82 - Front L/R output error
Troubleshooting Samsung Electronics 7-5 CD/VCD/DVD L/R output error (Mixed Audio output) Normal DATA 0 is input in AIC1-7? Analog output of AIC1-16, 17, 18, 19 is normal? Check AVJ2 peripheral soldering shot. Check VIC1-161 output. Check VIC1-169 (CD/VCD ; 16.9344MHz, DVD ; 18.432MHz) Yes Yes No No ...
Page 83 - Surround L/R output error
Troubleshooting 7-6 Samsung Electronics Surround L/R output error (Analog Audio output) 5.1-channel is contained in playing disc? Normal DATA 2 is input in AIC3-7? Check AVJ3 peripheral soldering shot. Output only in 2-channel (stereo channel) Check VIC1-164 output. Yes Yes No No Analog output of AI...
Page 84 - Digital output error
Troubleshooting Samsung Electronics 7-7 Digital output error Output in VIC1-159 is normal? Output in AIC5-6, 8, 10 is normal? Check AVJ4 peripheral soldering shot. Check VIC1 peripheral circuit. Check VIC5. Yes No No Yes No Power (Standby LED OFF) PF01 error? PD01 voltage is missing? Replace PIC1. R...
Page 85 - DVD play error
Troubleshooting 7-8 Samsung Electronics No front (SET) operation REF +/-, 5V-all, -28V power is supplied. 12MHz oscillation (FY1)? If the problem persists ; Check after replacing Jack PCB, with another one. Check other parts for abnormal front operation persists. Check power status. Check X-TAL peri...
Page 86 - Key operation or
Troubleshooting Samsung Electronics 7-9 All power is measured correctly and front cable is properly connected? All clocks (20MHz, 33.8688MHz, 27MHz) of main PCB oscillate normally? Check A/V decoder signal process block. Check all clock oscillating parts. Yes Yes No /CS2, /RD, /WR signal occur? Chec...
Page 87 - Video output error in
Troubleshooting 7-10 Samsung Electronics Video output error in RCA Jacks Power level is normal at pin 6, 17, 20, 25, 28, 31, 36, 39 in VIC50? 27MHz clock input is normal at pin 4 in VIC50? Check the connection between pin 2 in PIC6 and Emmiter in PQ24. Check the connection between pin 10 in VIC6 and...
Page 88 - CVBS output error at AV1; CVBS output error at AV2
Troubleshooting Samsung Electronics 7-11 CVBS output error at AV1 Video signal outputs normally in RCA jack? Function select signal is 9.5~12V at pin 8 in AV1? See "Video output error in RCA Jacks" Check the connection between SCQ1~SCQ7 block and pin 100 in FIC1. Yes Yes No No CVBS signal is...
Page 89 - RGB output error at AV1; S-Video output error at AV1
Troubleshooting 7-12 Samsung Electronics RGB output error at AV1 Output voltage at pin in AV1 is in 1V ~ 3V? RGB signal is outputed at pin 23, 26, 29 in VIC50? Check the pin 91 in FIC1 --> "H" state. Check SCQ 11, 12, 17 circuit. See "Video output error in RCA jacks" Yes Yes No No...
Page 90 - Exploded View and Parts List; Page
Samsung Electronics 8-1 8. Exploded View and Parts List 8-1 Cabinet Assembly (DVD-909) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-2 Cabinet Assembly (DVD-709) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-3 Deck Assembly - - - - - - - - - - - - - - ...
Page 91 - Exploded Views and Parts List; vailable
Exploded Views and Parts List 8-2 Samsung Electronics 8-1 Cabinet Assembly (DVD-909) 151 S.N.A. ( DECK-DVD MECHA ) 150 151 150 101 150 601 ( ASSY -PCB-MAIN ) CN11A 14 13 605 151 602 (ASSY -PCB-JACK ) 151 151 S.N.A 701 151 702 1 2 11 12 12 S.N.A. ( CABINET -BOTTOM ) S.N.A. ( CHASSIS-REAR ) 3 4 5 S.N....
Page 96 - Description Specification
Exploded Views and Parts List Samsung Electronics 8-7 Loc. No Parts No. Description ; Specification Remark 201 AH91-60117A ASSY-DECK CLAMPER;DVD860,-,DP-1 202 AH92-00035A ASSY-PCB-DECK;DP-3,- 203 3809-001125 CABLE-FLAT;30V,80C,140MM,8P,1MM,UL2896 204 AH91-60147A ASSY-BRKT DECK;DP-3,DVD-909,- 205 AH6...
Page 98 - Electrical Parts List
Loc.No Part No Description ; Specification Remark Loc.No Part No Description ; Specification Remark Samsung Electronics 9-1 601 ASSY-PCB-MAIN AR1 2007-000074 R-CHIP;100ohm,5%,1/16W,DA,TP,1608 AR2 2007-000074 R-CHIP;100ohm,5%,1/16W,DA,TP,1608 AR3 2007-000074 R-CHIP;100ohm,5%,1/16W,DA,TP,1608 AR4 2007...
Page 99 - Electrical Parts List
Loc.No Part No Description ; Specification Remark Loc.No Part No Description ; Specification Remark 9-2 Samsung Electronics Electrical Parts List MR5 2007-000084 R-CHIP;4.7Kohm,5%,1/16W,DA,TP,1608 MR6 2007-000084 R-CHIP;4.7Kohm,5%,1/16W,DA,TP,1608 MR7 2007-000084 R-CHIP;4.7Kohm,5%,1/16W,DA,TP,1608 M...
Page 111 - Block Diagrams
Block Diagrams 10-2 Samsung Electronics DECK ASS'Y Disc Motor Disc Motor Driver Actuator & Motor Driver Feed Motor DIC2 4M DRAM VIC4/10 32M SDRAM 2K EEPROM Pick-UP & I/V Amp Remote Control AMP AMP AMP Coaxial L T R T YoutCout SIC1 (KS1452) Digital Servo DIC1 (KS1453) DVD & CD Processor R...
Page 115 - PCB Diagrams; COMPONENT SIDE
PCB Diagrams 11-2 Samsung Electronics 11-1 Main COMPONENT SIDE SOLDER SIDE
Page 118 - JACK PCB; PLAY PCB
Samsung Electronics 12-1 12. Wiring Diagram JACK PCB MAIN PCB DECK PCB PLAY PCB PHONE/POWER PCB (DVD-909 ONLY) POWER PCB (DVD-709 ONLY) (DVD-709) <PIN1 ~ 6> (DVD-909) <PIN1 ~ 12> (DVD-709) <PIN1 ~ 6> (DVD-909) <PIN1 ~ 12> DVD-909 DVD-709
Page 119 - Wiring Diagram
Page 120 - Schematic Diagrams; Block Identification of PCB
Samsung Electronics 13-1 13. Schematic Diagrams 13-2 13-3 13-4 13-5 13-6 13-7 13-8 13-9 13-10 13-11 13-12 13-13 13-14 13-15 13-16 13-16 13-17 13-18 13-1 S.M.P.S. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13-2 Main Power Supply - - - - - - - - - - - -...
Page 121 - Schematic Diagrams
Schematic Diagrams 13-2 Samsung Electronics 13-1 S.M.P.S.
Page 122 - 3-2 Main Power Supply
Schematic Diagrams Samsung Electronics 13-3 13-2 Main Power Supply
Page 125 - Y Output
Schematic Diagrams 13-6 Samsung Electronics (DVD-909 OPTION) (DVD-909 OPTION) 13-5 Video Y Output C Output CVBS Output
Page 135 - PLAY
Schematic Diagrams 13-16 Samsung Electronics PLAY PHONE/POWER 13-15 Play & Phone/Power (DVD-909 Only) PLAY POWER 13-16 Play & Power (DVD-709 Only)
Page 138 - afety Information; CAUTIONS; • This unit can be used only where the; WARNING
2 S afety Information TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE THECOVER(OR BACK). NO USER-SERVICEABLE PARTS AREINSIDE. REFER SERVICING TO QUALI-FIED SERVICE PERSONNEL. This symbol indicates “dan-gerous voltage” inside theproduct that presents a riskof electric shock or person-al injury. CA...
Page 139 - For trouble free operation, follow the instructions shown below.; Handling Cautions; Formation of Condensation; broken, and the player’s internal parts may be damaged.; Disc Storage; Remote Control
3 C are & Maintenance For trouble free operation, follow the instructions shown below. Handling Cautions Formation of Condensation Due to sharp changes in temperature and humidity, condensation may form if warm air comes in contact with any cold parts inside the player.• When condensation forms ...
Page 140 - T A B L E O F C O N T E N T S
4 T A B L E O F C O N T E N T S DVD-YURO909/709 11/4/95 9:59 AM Page 4
Page 142 - isc Features; An important scene can be viewed in slow motion.; COPY PROTECTION
The combination of DVD, Video-CD, and CD in one unit provides excellent picture quality and dynamicsound. D isc Features 6 Excellent Sound The Dolby Digital system developed by Dolby Labsprovides crystal clear sound reproduction. Screen Video with MPEG2 compression technology. Bothregular and widesc...
Page 143 - SETUP; isc Type and Characteristics; DIGITAL; DVD; Playback Region Number
SETUP D isc Type and Characteristics Your DVD player is capable of playing discs with the following logos. 7 Disc Markings 2 DIGITAL SOUND STEREO • Region Code of DVDs you can play on this unit. • PAL broadcast system in U.K,France, Ger-many, etc. • Dolby Digital disc • Digital Audio disc • Stereo d...
Page 145 - STANDBY LAMP; DISC TRAY; STOP
SETUP OPEN/CLOSE OPEN/CLOSE 24bit 96kHz AUDIO D/A CONVERTER DIGITAL VIDEO SPATIALIZER N-2-2 DVD/VIDEO-CD/CD PLAYER DVD-709 SKIP STANDBY/ON / D escription-Front Panel 9 DVD-709 Front Panel Controls Front Display STANDBY LAMP • When the unit is first plugged in, the indi- cator lights. When power is p...
Page 147 - DIGITAL AUDIO OUT JACK
SETUP DIGITAL AUDIO OUT ANALOG AUDIO OUT R L VIDEO OUT S-VIDEO OUT TV SYSTEM SELECT NTSC SECAM PAL AV D escription-Rear Panel DIGITAL AUDIO OUT JACK • Use a coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital decoder or DTS decoder. ANALOG AUDIO OUT JACKS • Connect to ...
Page 148 - * This switch is located in the rear of; PAL
TV SYSTEM SELECT NTSC SECAM PAL TV system select You can enjoy NTSC or PAL encoded discs by using your TV SYSTEM SELECT switch to choose the appro-priate system. 12 • Only when you playback PAL-encoded DVD with NTSC-TV. The play- er can not playback the disc. • When the selected TV-SYSTEM doesn't co...
Page 149 - T our of the Remote Control
SETUP 13 A T our of the Remote Control DVD Function Buttons DVD POWER Button NUMBER Buttons OPEN/CLOSE Button SETUP Button • Brings up the DVD player’s Setup menu. ZOOM Button SEARCH Buttons • Allows you to search forward/backward through a disc. STOP Button STEP Button • Advances playback one frame...
Page 151 - CONNECTIONS; Before Connecting the DVD Player; Connecting to a TV; • Method 1; DVD Player + TV with Video Input Jack; • Method 2; • Always turn off the DVD player, TV, and other; AV Cable
CONNECTIONS C hoosing a Connection The following diagrams show common connection examples that can be used for connecting your DVD playerto a TV or other equipment. DVD-909 Before Connecting the DVD Player Connecting to a TV (For Video) MIXED AUDIO OUT R1 R2 L1 R L L2 VIDEO OUT S-VIDEO OUT V1 V2 AV1...
Page 152 - AUDIO; Connecting to an Audio System
C hoosing a Connection (Cont d) Connecting to an Audio System MIXED AUDIO OUT R1 R2 L1 R L L2 ANALOG AUDIO OUT R FRONT L R SURROUND L CENTER S/W OPTICAL COAXIAL OPTICAL COAXIAL DIGITAL AUDIO OUT AUDIO SYSTEM DVD PLAYER 16 Connecting to an Audio System An Example of Connecting DVD with Other Equipmen...
Page 155 - • Turn on a TV and press the TV/VIDEO button to select video; laying a Disc; The STANDBY indicator light goes out and the tray opens.; SELECT MENU LANGUAGE; Playback
BASIC FUNCTIONS Before Playback • Turn on a TV and press the TV/VIDEO button to select video mode. • Turn on your Audio System to select AUX, CD or DVD.• Refer to your AUDIO Owner’s Manual. After plugging in the player, the first time you pressthe DVD POWER button, this screen comes up : If you want...
Page 156 - RESUME function
P laying a Disc (Cont d) D D D D V V V V D D D D // // V V V V C C C C D D D D // // C C C C D D D D 20 1 . 1 . Stopping Playback Press the STOP button in playback. 2 . 2 . Removing Disc Press the OPEN/CLOSE button. 3 . 3 . Pausing Playback Press the PLAY/PAUSE or STEP button on the remote during pl...
Page 157 - earching & Skipping through a Chapter or T rack; Searching through a Chapter or Track; • When playing a DVD, if you press the NEXT SKIP button,
BASIC FUNCTIONS S earching & Skipping through a Chapter or T rack During playback, you can search quickly through a chapter or track or use the skip function to jump to thenext selection. Searching through a Chapter or Track Skipping Tracks D D D D V V V V D D D D // // V V V V C C C C D D D D /...
Page 158 - When Playing a DVD; sing the Display Function; When Playing a CD/VCD; During playback, press the
When Playing a DVD 1 . 1 . During playback, press theDISPLAY button on theremote. - Current title, chapter number and elapsed time will be displayed. • Use the LEFT/RIGHT button to select a title or a chapter number. Use the UP/DOWN button or Numberbuttons to enter a different title orchapter number...
Page 159 - epeat Play; Repeat play allows you to repeat a track, title, or the entire disc.; When playing a CD/VCD; Press the REPEAT button
BASIC FUNCTIONS R epeat Play Repeat play allows you to repeat a track, title, or the entire disc. D D D D V V V V D D D D // // V V V V C C C C D D D D // // C C C C D D D D When playing a CD/VCD When playing a DVD 1 1 Press the REPEAT button once to display the currentstatus. 2 2 Press the REPEAT b...
Page 160 - sing the A-B Repeat Function
1 . 1 . Press the A-B REPEAT button at the beginning(A) of the segment you want to review. 2 . 2 . Press the A-B REPEAT button again at theend (B) of the segment you want to review.The segment will begin repeating. 1 1 Press the A-B REPEAT button. U sing the A-B Repeat Function The A-B Repeat functi...
Page 161 - rogram Playback in a Specific Order; Program VCD or CD; In stop mode, press the; • Press the MODE button while in stop; TITLE CHAPTER; When you make a wrong selection during programming; TRACK PROGRAM ORDER
BASIC FUNCTIONS P rogram Playback in a Specific Order Program playback lets you set up an order of playback for the titles, chapters, or tracks of a specific disc. Yourplayer must be in stop mode for this feature to work. D D D D V V V V D D D D // // V V V V C C C C D D D D // // C C C C D D D D Pr...
Page 162 - sing the Disc View Function; Press the ENTER button.; DISC VIEW
U sing the Disc View Function The desired music or video display can be accessed directly without using the menu function. D D D D V V V V D D D D // // V V V V C C C C D D D D // // C C C C D D D D 26 1 . , 1 1 . , 1 2 . , 2 2 . , 2 3 . , 3 3 . , 3 4 . , 4 4 . , 4 NOTE • When in VCD 1.1 & 2.0 m...
Page 163 - - The audio and subtitle languages are; electing Audio; Using the Menu Button; Press the MENU button.; When playing a VCD; AUDIO; SUBTITLE; ENGLISH; FRANCAIS
ADVANCED FUNCTIONS • This function depends on what languages are encoded on the disc and may not work with all DVDs. • A DVD disc can contain up to 8 audio languages. 1 . 1 . During playback, press theAUDIO button. 2 . 2 . Use the UP/DOWN buttonto select the desired lan-guage on a DVD. - The audio a...
Page 164 - electing the Subtitle Language; Using the MENU button; - Initially, the subtitling will not appear
S electing the Subtitle Language When a DVD is recorded with subtitles, you can use the Subtitle feature to view the subtitles on-screen.If a menu is encoded on the disc, you can also select by using the MENU button. D D D D V V V V D D D D Using the MENU button Using the SUBTITLE button 1 . 1 . Pre...
Page 165 - electing the Desired Screen Angle; Using the ANGLE button
ADVANCED FUNCTIONS S electing the Desired Screen Angle When a DVD contains multiple angles of a particular scene, you can use the Angle function. Using the ANGLE button Check to see if an ‘ANGLE ( )’ mark is present atthe upper right hand corner of the screen. 1 . 1 . When an ‘ANGLE’ mark is shown, ...
Page 166 - sing the Bookmark Function; Press the BOOKMARK button to turn off the display.; Recalling a Marked Scene; Clearing a Bookmark
U sing the Bookmark Function The Bookmark function lets you select parts of a DVD or VCD (MENU OFF mode) so that you can quicklyfind the section at a later time. D D D D V V V V D D D D // // V V V V C C C C D D D D Using the Bookmark Function (DVD/VCD) 1 . 1 . During playback, press the BOOKMARK bu...
Page 167 - sing the Zoom and 3D Sound; Using the 3D Sound Function; During playback, press the 3D SOUND button.; ADVANCED; Using the Master Volume Control Function
U sing the Zoom and 3D Sound D D D D V V V V D D D D // // V V V V C C C C D D D D Using the Zoom Function (DVD/VCD) Using the 3D Sound Function The simulated surround effect (SPATIALIZER N-2-2)depends on the disc contents. If you connect theunit to your stereo system, you can enhance soundquality a...
Page 168 - sing the Setup Menu
1 . 1 . Press the SETUP button on the remote in theplay or stop mode. PLAYER MENU : Setup of the Display Language (See P33) Use the Player preference menu to select the language for the player's on-screen displays. DISC MENU : Setup of the Menu Language (See P34) Use the Menu preference menu to sele...
Page 169 - etting Up the Language Features; You can set the language for your DVD player in advance.; Using the Player Menu; - ENGLISH is selected and the screen returns to SETUP; PLAYER MENU LANGUAGE
CHANGING SETUP MENU S etting Up the Language Features You can set the language for your DVD player in advance. Using the Player Menu D D D D V V V V D D D D 33 1 . 1 . Press the SETUP button when in play or stopmode. 2 . 2 . Use the UP/DOWN button to select thePLAYER MENU. 3 . 3 . Press the ENTER bu...
Page 170 - DISC MENU LANGUAGE; AUDIO LANGUAGE; How to make the SETUP MENU disappear or
S etting Up the Language Features (Cont d) Using the Subtitle Language Using the Disc Menu Language Using the Audio Language D D D D V V V V D D D D 34 This function changes the lan-guage only for the text on thedisc menu screens. 1 1 Press the SETUP button when in play or stop mode. 2 2 Use the UP/...
Page 171 - etting Up the Parental Level; SETTING THE; - The disc which contains LEVEL 7 or; Press the SETUP button; - ‘7777’ is the original password that; Enter the new password.; How to make the SETUP MENU; PARENTAL CONTROL; RATING LEVEL
CHANGING SETUP MENU S etting Up the Parental Level The Parental Level function works in conjunction with DVDs that have been assigned a rating - which helps youcontrol the types of DVDs that your family watches. There are up to 8 rating levels on a disc. D D D D V V V V D D D D SETTING THE PASSWORD ...
Page 172 - etting Up Audio Options
SPEAKER SETUP (DVD-909only) To select the SPEAKER SETUP to hear surround sound. 4 . 4 . Use the UP/DOWN button toselect the desired item. Thenpress the ENTER button. DOLBY DIGITAL OUT PCM : Converts to PCM (2CH) 48kHz/16Bit audio. Select PCM when using the Analog Audio Outputs. BITSTREAM : Converts ...
Page 173 - Press the SETUP button in play or stop mode.; TEST; H o w t o m a k e t h e S E T U P M E N U d i s a p p e a r o r
CHANGING SETUP MENU 4 . 4 . Use the UP/DOWN or LEFT/RIGHT button toselect the desired item. Then press the ENTERbutton. 5 . 5 . Use the UP/DOWN button to select OPTION.Then press the ENTER button. Setting up SPEAKER MODE • If you have connected the system to a speaker with low fre- quencies of 100Hz...
Page 174 - etting Up Display Options; Use to turn on or off the on-screen displays when the DVDs
1 . 1 . 2 . , 3 . 2 . , 3 . S etting Up Display Options D D D D V V V V D D D D 38 1 . 1 . Press the SETUP button in play or stop mode. 2 . 2 . Use the UP/DOWN button to select DISPLAYOPTIONS. Then press the ENTER button. 3 . 3 . Use the UP/DOWN button to select the desireditem. Then press the ENTER...
Page 176 - ontrolling a TV with the Remote; Point the DVD’s remote at the TV.; While holding down the TV button, enter 0.; TV Codes; CODE
4 . 4 . If the TV turns off, setup is complete. Enter other codes of the same brand if the first code doesnot work. 5 . 5 . To operate the TV, use the “TV FunctionButtons” described on page 14. C ontrolling a TV with the Remote The remote can also be set up to control most TVs. To program the remote...
Page 177 - REFERENCE; roubleshooting Guide; Action
REFERENCE T roubleshooting Guide Proper functioning of your DVD player is mostly dependent on the discs you play. When some of the function-ing indicated in the User’s Manual do not work properly, it is highly probable that the disc is responsible. Westrongly recommend you review the instruction boo...
Page 178 - pecifications
RCA-JACK Output Level Composite Video S-VIDEO SCART JACK SCART JACK VCD : 12 cm CD : 8 cm (COMPACT DISC) CD : 12 cm (COMPACT DISC) DVD (DIGITAL VERSATILE DISC) Operating Temperature Range Operating Humidity Range Dimensions Weight Power Consumption Power Requirements AC 110 ~ 240V, 50/60Hz 19 W 3.4 ...
