Blaupunkt TravelPilot RGN 08- User Manual

5 Table of contents Switching on navigation ................................................ 6Basic navigation menu ..................................................... 7Entering the destination ................................................ 7Memory ..................................................

6 Switching on navigation Press AUX with the car radio switched on. AUXILIARY MENU will ap- pear on the screen with a list of the equipment connected.Press the NAVI function key to display the last navigation page used. To access the main navigation menu, press the EXIT function key as often as nece...

7 Main navigation menu The system will either prompt you to enter a destination or show thedestination selected last. In the main navigation menu you can choose from the following options: INFO MENU (if a destination has been entered) START NAVIGATION (if a destination has been entered) ENTER DEST. ...

8 MEMORY Allows you to select your destination fromthe memory. This assumes that you havealready stored at least one destination inthe memory.Press MEMORY . The destination memory menu will appearon the screen.Select FROM MEMORY to access the memory and read the destinations storedthere.Press the / ...

9 CITY Allows you to enter the city in which yourdestination is located.If a city has already been entered, its namewill appear in place of CITY . Press CITY . The name of the city for the destination lastselected, if there is one, will appear in theinput line. A selection field containing let-ters ...

10 A list from which you can select your desti-nation will appear on the screen.If the desired city name does not appear,you can use the / rocker switch to page through the list.If the city/city district names are too long toappear on the display, you can use the / rocker switch or the function keys...

11 STREET/JUNCTION This menu item will not appear unless thestreets in the city selected are included onthe digital map on the navigation CD.Enter the street name and select the streetfrom the list as described previously in thesection on “CITY”.After you have selected the street, it willappear belo...

12 airports, motorway exits/junctions/servicecentres, petrol stations, car parks, bordercrossings and garages.If you select OTHER DEST. from the Enter Dest. menu, you will see a menu witha number of different menu items. CENTRE This menu item will list all of the city dis-tricts stored for the city ...

13 After you have selected a special destina-tion from one of these areas, the displaywill show a list of destinations which can beselected.The lists for DESTINATION AREA and POSITION AREA are sorted according to distance and include information on thedistance and direction.The lists for TOWN AREA a...

16 Any combination of options can be select-ed (e.g. with motorway - with ferry - no toll -short route). After you have selected the options yourequire, press the START function key. If you press the EXIT function key, you will return to the main navigation menu. Note:A situation my arise where a ro...

17 indicates that: “The route is being calculat-ed”.The distance to the destination “as thecrow flies” is also displayed.If you are travelling with your vehicle downa digitised street, you will be guided to yourdestination (after the route calculation hasbeen completed) by spoken recommenda-tions an...

19 special destinations such as workshops,etc.), an arrow will appear in the display, assoon as you leave the digitised area, indi-cating the direction in which your destina-tion lies. The voice output announcementfor this is: “You have reached the area ofyour destination”. If you are in the immedia...

20 JAM AHEAD Using the “ JAM AHEAD ” function, the cal- culated route can be altered according tothe current traffic situation. This means thatif you see a problem with the traffic upahead or you are informed about this overthe radio (e.g. a traffic jam or road works),you can exclude certain route s...

21 Press the upper left function key. The TRAF. JAM FUNCT. menu will appear. Press the JAM AHEAD function key. A list of route sections that can be excludedwill then appear. The first section in the listthat can be excluded is the length of roadstarting from your current vehicle positionup to the ne...

23 Information on the display During route guidance, the following information will appear on the dis-play: - the driving recommendation symbol (in the centre) - the distance remaining to the destination (on the top left) - the driving time remaining to the destination (on the bottom left) - the dis...

24 Info Menu There are two ways to activate the Info menu. • Press INFO MENU in the main navigation menu. Note: This menu item will not appear unless you have already select-ed a destination. • During route guidance, press .In this case, the Info menu will disappear from the screen after a fewsecond...

26 The destination memory Select NEW DESTINATION or ENTER DEST. in the main navi- gation menu and then MEMORY from the following menu. The desti- nation memory will appear on the screen. The menu includes the follow-ing options: FROM MEMORY If you select this item, you will access thedestination mem...

27 sponding function key to select the des- tination you wish to move. The destinationwill be highlighted. If necessary, use / to page through the list until you find theplace where you want to store the destina-tion. Press the corresponding function key at that location to move the destination. SAV...

28 DELETE If you activate this sub-menu you will seethe destinations stored in the destinationmemory. If there are more than four entriesyou can use / to page through the list. Select the entry you wish to delete bypressing the corresponding function key . You will see an on-screen prompt and cancan...

29 DSC Navigation Menu (Direct Software Control) Press S until DSC-MAIN MENU appears in the header. Press NAVI to access the DSC navigation menu. The DSC navigation menu contains the following menu items: GPS INFOPOSITIONNAV LANGUAGESTANDBYDEMOVEREXIT GPS INFO If you select GPS INFO , you will be in...

31 FROM DEST.MEMORY You will access the destination memory. Ifone of the destinations stored correspondsto your current position, select this destina-tion. Use -M and M+ to adjust your distance to the junction more precisely andset your position. If the destination youhave selected cannot be used fo...

33 VER Indicates the software version. EXIT Returns to the navigation menu. S DSC NAVIGATION GPS INFO DEMOPOSITIONNAV LANGUAGESTANDBY VER EXIT

34 Example for entering a destination Selected destination:Hildesheim, Kaiserstrasse/Kennedydamm junction Use the function keys in the navigation menu to select the following menu items one after the other:• NEW DESTINATION or ENTER DEST. • CITY “ ENTER CITY ” will appear in the header on the screen...

36 The monitor will now show a listing of all the streets which either intersectwith or are directly connected to “Kaiserstrasse”.• Page through the list by pressing . • Press the function key to the left of KENNEDYDAMM . Now the destination input is complete. The monitor will now read “ HIL- DESHEI...

37 Demo mode Guide for operating the system when installed in a shop display panel: If the RGN 08 is to be operated in demo mode while installed in ademo wall (e.g. in a shop display), a minimum calibration must becarried out. Open the auxiliary menu by pressing the AUX key andthen press the 9, 5, 7...

39 Appendix CD-ROM The data required for route guidance are stored digitally on the CD-ROM.For details on the exact contents of the CD, please refer to the informationaccompanying it. Changing the CD The CD-ROM can only be changed whilst the vehicle is stationary. Thesystem must be switched on. To e...

40 S PLEASE CHECK CD-ROM! Wrong CD-ROM If the wrong CD-ROM is inserted into the navigation computer, the followingerror message will appear: “ PLEASE CHECK CD-ROM! ”. If this is the case, remove the incorrect CD-ROM and replace it with the correct one.For technical reasons this error message will al...

Blaupunkt-Werke GmbH Bosch Gruppe 11/98 K7/VKD 8 622 401 214 D3 (GB)