Blaupunkt RCR 128 - Manual

2 2 Press SRC/SC longer to select theSCAN function. Radio mode Press SRC/SC longer.The radio will scan all receivable FM,MW and LW stations (Dresden RCR 128 without MW, LW). “SCAN” and thestation name (if applicable) appear onthe display one after another (only forFM). PTY ScanPTY Scan can be starte...

2 3 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Setting the tone:Select the audio mode. Press AUDonce and set the tone using the rockerswitch. Treble: Treble +Treble – Bass: Bass –Bass + Press AUD twice and set the faderusing the rocker switch. Fader frontFader rearBalance...

2 4 If the set was still in operation, it will turn offnow. All current settings remain stored. If acassette or CD is inserted, it will be kept inthe set.The radio will turn on automatically when youattach the release panel again. Attaching the release panelSlide the panel (B) from the left to the g...

2 5 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Fixing the release panel If you wish to fix the release panel perma-nently to the chassis, screw down the en-closed bolt at the left hand side of the chas-sis into the hole (C), see Fig. C Selecting the audio mode Use the SRC...

2 6 Selecting a waveband With this car radio you can select betweenthe following wavebands: FM 87,5 - 108 MHzMW 531 - 1602 kHzLW 153 - 279 kHz(Dresden RCR 128 without MW, LW).• Select the desired waveband by press-ing the BA/TS button. Station tuning Automatic seek tuning / • Press / ; the car radio...

2 7 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS To select a scanned station and switchoff the Scan function:• Press SRC/SC. If no station is selected, scan will start again. Selecting the automatic tuningsensitivity You can alter the automatic tuning sensitiv-ity.If “lo” i...

2 9 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Scanning stations with PTY SCAN Requirement: “PTY” must appear in the dis-play.• Press the SRC/SC button until youhear a beep.All of the stations in your current re-ception area offering the selected pro-gramme type will be s...

3 0 Traffic announcement priorityon/off If the priority for traffic announcement pro-grammes is activated, “TA” will light up inthe display. To switch the priority on or off:• Press the AF·TA button. “TA” appears. If you press AF·TA while a message is be-ing broadcast, this message will be inter-rup...

3 1 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Cassette deck operation Cassette playback Insert the tape into the slot with the openside showing to the right.Press SRC/SC to select the tape deck mode.“TAPE 1” or “TAPE 2” will appear. The tapewill be played in the directio...

3 2 CLOCK 24 To switch between 12-h and24-h clock display. CLOCKSET To set the clock manually. Press << >> to select hours/minutes. Press / to adjustthe flashing value. ON VOL To set the turn-on volume.Press << >> to adjust theturn-on volume as desired. MUTE To change the mut...

3 3 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Overview of the DSC factorysettings LOUDNESS 3 TA VOL 40 REG OFF SENS DX1 CLOCKTYPE CLOCK 24 CLOCKSETON VOL 20 MUTE 10 BEEP 3 RM OFF DIS OFF Subject to modifications! Appendix Specifications AmplifierOutput power: 4 x 19 W RM...

1 9 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Blaupunkt-Werke GmbH Bosch Gruppe 3/98 Mg K7/VKD 8 622 401 526 Dresden,Boston RCR128 d® 02.05.2002, 11:13 Uhr 19