Page 2 - Erklärung der Positions-Nummern siehe Kurzanleitung
2 23 20 21 22 Erklärung der Positions-Nummern siehe Kurzanleitung 6 7 8 9 10 11 1 3 1 4 1 5 12 5 2 3 1 4 1 6 2 1 3 1 9 1 8 1 7
Page 3 - Contents
5 1 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Contents Quick Reference ........................... 53 RC 08 remote control unit ........... 62 Important notes ............................ 63 What you need to know ........................ 63Traffic safety ...................
Page 5 - Quick Reference
5 3 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Switching the sound on/off:Press ON briefly. If the sound hasbeen switched off, “Mute” will appearin the display.You can switch on the sound again byturning the volume knob 3 . Switching the unit on/off with theKeyCard:The un...
Page 6 - Switching between the menu levels
5 4 After the beep press ON. The unit willswitch on.After the unit has played for an hour, itwill switch off automatically to preventthe vehicle battery from running down. 3 Adjusting the volumeTurn the knob to adjust the volume. The volume setting will appear in thetop line of the display. When the...
Page 10 - Rocker switch
5 8 CLRDeletes the TPM (refer to the sectionon “Deleting the TPM”). NAMEYou can enter names with a maximumof 7 characters for up to 99 CDs.When these CDs are played, the nameentered will appear in the top line ofthe display if the display has been setto “Name” (refer to the section on “CDnaming”). 5...
Page 12 - Display
6 0 < DOT fieldAdditional display for top line. Radio operation FM1, 2, 3,T - FM memory banksorMW, LW - Wavebands orSpecial pictures for a given situation, e.g. driving cars during traffic an-nouncements Tape deck operation 00:25 - Tape counter orSide A / B - Tape side CD changer operation Press ...
Page 13 - KeyCard
6 1 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS > CCSwitches to tape deck operation ? TU (tuner)Switches to radio operation, selectsthe menu levels @ Cassette slotInsert a cassette (Side A or 1 facingup; opening to the right). A Visual theft protectionIf you want to use...
Page 14 - RC 08 remote control unit; Station seek tuning
6 2 RC 08 remote control unit 23 20 21 22 D V- / V+Volume control. E SRC (Source)Switches operating modesPress SCR repeatedly to select. - Radio- Cassette- Changer (if a changer is connected) / Select trackup: Press brieflyCUE - fast forward (audible):Hold pressed downdown: Press twice or repeat-edl...
Page 15 - Important notes
6 3 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Important notes What you need to know Before using your new car audio system,please read through the following informa-tion carefully. Traffic safety As the driver of a motor vehicle, it is yourresponsibility to pay attention...
Page 16 - Incorrect KeyCard; KeyCard theft protection system; Removing the KeyCard
6 4 Operating the unit for the firsttime To insert the KeyCard, unlock the operatingpanel by • pressing 1 , the operating panel will fold down. • Insert the KeyCard with the contactsfacing down as shown in the illustra-tion (arrow 1). 2 1 3 • Push the card in the direction of the ar-row (2) and lock...
Page 17 - Displaying the radio pass data; Flashing light diode
6 5 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS “Training” a second KeyCard /Replacing a KeyCard When the unit is in operation with the firstKeyCard, you can “train” a second one touse with the set as well. If you want to “train” a second KeyCard: • Insert the first KeyCar...
Page 18 - Switching off the flashing light; Care of your KeyCard
6 6 / - Enter digits (press as often as required) << >> - Select the entry position. • Press ENT after you have entered thecorrect master code. The new KeyCard has been accepted whenthe unit begins to play. Lost or damaged KeyCard If the KeyCard for your unit is lost or dam-aged you can ...
Page 19 - First-time installation; Activating the Install menu
6 7 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS First-time installation After you switch on the unit for the first timeor when the unit has been disconnected fromthe power supply, “INSTALL” will appear inthe top line of the display. In this menu you can enter/alter the fol...
Page 20 - press NEXT as often as required.; Reset to default settings; Connecting external equipment
6 8 Switching the ignition connec-tion on/off Use IGN (ignition) to be able to switch thecar radio on and off with the ON button onlyor with the ignition as well. Switching on/off:• Press IGN, “Ign on” or “Ign off” will ap-pear in the top line of the display. • Use << / >> to switch on t...
Page 21 - press ENT and EXIT twice.
6 9 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Selecting the operatingmode You can select from among the followingoperating modes: radio (TU), tape deck (CC)and CDC (CD changer). CC cannot be selected unless there is acassette inserted in the tape deck. CDC cannot be sele...
Page 22 - AF - Alternative frequency; Radio operation with RDS (Radio Data System)
7 0 To return to page 1:• press PRE. The unit will switch back to menu level 1automatically 8 sec. after the last key waspressed. Press EXIT to return to menu lev-el 1 immediately. AF - Alternative frequency The AF (Alternative Frequency) functionmakes sure that radio is always tuned intothe stronge...
Page 23 - REG - regional program; Selecting a waveband
7 1 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS While searching for the strongest receptionsignal, the radio may switch to mute briefly. If “Search” appears in the display when youswitch on the radio or recall one of the storedfrequencies, this indicates that the unit isau...
Page 24 - Seek tuning; Storing stations
7 2 Radio operation with RDS (Radio Data System) Seek tuning UpDown << / >> Down/Up in short intervals (for FM only, when “AF” isswitched off) Manual tuning with << / >> You can also tune into a station manually. Important:AF and PTY must be switched off (i.e. thesymbols do n...
Page 25 - Recalling stored stations; Press TU and PS one after the other.
7 3 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Radio operation with RDS (Radio Data System) • Press TS briefly. “T-Store” will flash in the display. The six strongest FM stations will be auto-matically stored on the memory bank “FMT”(Travelstore). When this process has be...
Page 26 - Press TU and SCAN briefly.
7 4 To select a scanned station and switchoff Preset Scan:• Press the rocker switch briefly. Scanning stations withRadio Scan You can also scan all of the stations withinreception range. To start the Scan function:• Press TU and SCAN briefly. All of the stations on the waveband select-ed and within ...
Page 27 - Program type; Selecting stored program types
7 5 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Switching PTY on/off • Press TU and NEXT one after theother. • Press PTY to switch the function on oroff. The red arrow will light up when PTY isswitched on. In addition, “PTY” will appearunder the top line in the display.Whe...
Page 28 - Radio text
7 6 To select any program type You can select any of the program types.To do so• press << or >> repeatedly until the pro-gram type you would like to select ap-pears in the top line of the display. Storing program types You can store any of the available programtypes on any of the preset ...
Page 29 - Traffic information station reception with RDS-EON; Press TU to access menu level 2.; Warning beep; Switching the warning beep off
7 7 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Activating radio text Park your vehicle in a safe place, switch offthe ignition. The radio will switch off auto-matically.• Press ON for approx. 1 sec. to switchthe radio back on. • Press TU, NEXT and RT (radio text)one after...
Page 30 - Tape operation; Inserting a cassette; Removing a cassette; Automatic seek tuning start
7 8 Tape operation Inserting a cassette • Switch on the car radio and release theoperating panel by pressing 1 . The operating panel will fold down forwards. • Insert the cassette with Side A or 1facing up without the use of force. The cassette will automatically be transport-ed to its playing posit...
Page 31 - Selecting titles with S-CPS; Selecting the display mode
7 9 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Scanning cassette titles withSCAN It is possible to scan the titles on a cassette.As soon as you find a title you like, you canend SCAN. This title will then continue toplay. SCAN is active when the corresponding redarrow fla...
Page 32 - Press REV to end fast forward or rewind.; Care instructions
8 0 Repeating titles with RPT RPT = Repeat Repeats the title currently playing. This titlewill repeat until RPT is switched off. TheRepeat function will end automatically whenthe cassette is removed or the unit isswitched off. The Repeat function is active when the cor-responding red arrow lights up...
Page 33 - CD changer operation; Selecting CDs
8 1 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS CD changer operation You can play CDs on this audio system onthe Blaupunkt CD changers, CDC A 06,A 072, A 08 or A 071.These changers can be purchased at anyauthorised retail outlet. Note: Use only standard circular CDs measur...
Page 34 - TPM; Switching TPM playback on/off; Deleting the TPM; Selecting tracks
8 2 - RPT Trck = Repeat track - RPT CD = Repeat CD - RPT off = Repeat function off • Press RPT as many times as neces-sary until you have selected the de-sired setting. The CD or the track will repeat until youpress RPT to switch off the function with“RPT off”. TPM (Track Program Memory) Use this fe...
Page 35 - Mix off
8 3 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS SCAN Use this function to scan all of the CD tracks. Press CDC to switch the menu levels. To start the Scan function:• Press SCAN briefly. The red arrow will flash to indicate that thefunction is active.The tracks will be sca...
Page 36 - Press EXIT or DSC to quit the DSC menu.; Displaying the clock; Setting the clock
8 4 To delete the name of one CD• press CD for approx. 1 sec.“CD clr” will appear briefly in the topline of the display. To delete the names for all of the CDs• press ALL for approx. 4 sec.“Memo clr” will appear briefly in the topline of the display. To return to the DSC menu:• Press EXIT. Press EXI...
Page 37 - DSA; – Digital Sound Adjustment; Press DSA and EQ one after the other.
8 5 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Selecting a 12 or 24-hour mode You can choose whether the time is dis-played in a 12 or 24-hour mode.If necessary, refer to the section on “DSCprogramming - CLK, MODE”. Synchronisation To improve the accuracy of the internalc...
Page 38 - Switching the equalizer on/off; EQ 2 for the driver and a front-seat pas-; EQ 3 for passengers in the front and
8 6 refer to the section on “Self-adjusting equal-izer” or “Manual equalizer adjustment”. The settings for “Rock to Vocal” are fixedvalues which cannot be adjusted. • Press / to select the desired set-ting. Switching the equalizer on/off • To switch the equalizer off, press <<. “EQ off” will a...
Page 39 - Manual equalizer adjustment; Altering the setting manually; Activating an equalizer setting; press DSA and EQ one after the other.
8 7 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS As soon as the self-adjustment has beencompleted, the setting which has been ad-justed will appear in the top line of the dis-play. A graph indicating the values set willappear in the DOT display.If desired, proceed to take r...
Page 40 - DNC; – Dynamic Noise Covering
8 8 DNC – Dynamic Noise Covering DNC is used when the vehicle is in motionto boost the car audio system’s volume to alevel which is considered pleasant in thestationary vehicle.The volume is boosted at different levels forthe different frequency ranges, dependingon the amount of noise which develops...
Page 41 - DSC programming
8 9 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS DSC programming This car audio system has been equippedwith DSC (Direct Software Control) to allowyou to customise certain programmable,basic settings to suit your personal needsand preferences and then store them. The basic ...
Page 42 - / to adjust the display brightness
9 0 PTYUse to select the language used to indicatethe program type: Deutsch, English orFrançais. SHARXSwitches the bandwidth in the FM frequen-cy range.When there are a large number of stationswithin your current reception range, use <<>> to switch to Sharx on which will preventmost inte...
Page 46 - Specifications; Amplifier; Tape deck; Glossary - Technical Terminology
9 4 Specifications Amplifier Output power: 4 x 25 W RMS poweracc. to DIN 45324 at14.4 V4 x 40 W max. power Tuner WavebandsFM : 87.5 – 108 MHz MW : 531 – 1602 kHz LW : 153 – 279 kHz FM sensitivity: 0.7 µ V at 26 dB signal-to-noise ratio. FM frequency response: 20 - 16 000 Hz Tape deck Frequency respo...
Page 49 - Index
9 7 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Index A Accessories 63 Alternative frequency 70 B Blank Skip (BLS) 80 C CD changer operation 81, 82, 83 Clock 84, 85 CPS 79 D Display 54, 60 DNC 88 Dolby B NR 78 DSA 85, 86, 87 DSC default settings 93 DSC programming 89, 90, ...
Page 50 - Bosch Gruppe
Blaupunkt-Werke GmbH Bosch Gruppe 03/99 Pf K7/VKD 8 622 401 874 Service-Nummern Tel.: Fax: Deutschland 018 050 002 25 051 214 940 02 Belgique 025 255 444 025 255 448 France 014 010 70 07 014 010 73 20 Nederland 023 565 63 48 023 565 63 31 Great Britain 018 958 383 66 018 958 383 94 Danmark 044 898 3...
