Page 6 - About these instructions; Symbols used; Warns about laser beam; Use as directed
43 EN GLISH About these instructions About these instructions These instructions contain important infor-mation to easily and safely install and oper-ate the device. Read these instructions carefully and completely before using the device. Keep the instructions at a location so that they are always ...
Page 7 - For your safety; Observe the following!; DANGER; Increased risk of injury from plug.; CAUTION; The device contains a Class 1 laser
44 For your safety For your safety The device was manufactured according to the state of the art and established safety guidelines. Even so, dangers may occur if you do not observe the safety notes in these instructions: If you are installing device yourself You may only install the device yourself ...
Page 8 - Cleaning instructions; Scope of delivery; Optional equipment; Remote control
45 EN GLISH Cleaning instructions Solvents, cleaning and scouring agents as well as dashboard spray and plastics care product may contain ingredients that will damage the surface of the device. Use only a dry or slightly moistened cloth for cleaning the device. Disposal of old unit (EU countries onl...
Page 9 - Service; Detachable control panel; Theft protection; Never drop the control panel.; Detaching the control panel; Press the; straight; out of the
46 Warranty We provide a manufacturer's warranty for products bought within the European Union. Devices purchased outside the European Union are subject to the warranty terms published by our respective regional agency. The warranty terms can be called up under www.blaupunkt.com or requested directl...
Page 10 - Attaching the control panel
47 EN GLISH Notes: The device is switched off after a time preset by you. For further details, please read the section "Switch-off time (OFF TIMER)" in this chapter. The device remembers the audio source played last for the next switch-on. Any CD already inserted in the device remains there....
Page 11 - Adjusting the volume; Setting the power-on volume
48 Switching on/off There are various ways of switching the de-vice on/off: Switching on/off with the On/Off button For switch-on, press the On/Off but-ton 3 . The device switches on. To switch off the device, press and hold down the On/Off button 3 for longer than two seconds. The device switches o...
Page 12 - Muting during telephone mode
49 EN GLISH Telephone Audio/Navigation Audio Muting during telephone mode If your car sound system is connected with a cell phone or navigation system, "picking" up the phone or a voice output of the navi-gation system automatically mutes the car sound system. The call or the voice output is...
Page 13 - Automatic Sound
50 When you have fi nished making your chang-es, press the ESC/DIS button 5 . Note: You can use the volume control 4 to adjust the volume of telephone calls and navigation announcements whilst you are listening to them. Switching the confi rmation beep on/off The system will output a confi rmation bee...
Page 14 - Adjusting the tuner; BAND
51 EN GLISH Radio mode This device is equipped with an RDS radio receiver. Many of the receivable FM stations broadcast a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears on the display as soon as t...
Page 15 - Tuning into a station; Automatic station seek tuning
52 "OFF" or "ON" is displayed alongside "REG". To switch REGIONAL on/off, press the or button 9 . When you have fi nished making your chang-es, press the ESC/DIS button 5 . Switching the RDS function on/off To switch the RDS functions AF and REGIONAL on or off, press and hold ...
Page 16 - Storing stations; Storing stations manually
53 EN GLISH Press the or button 9 to switch to the next station on the broadcasting network. Note: When using this feature, you will only be able to switch to stations that you have received once before already. To receive the stations, use the Scan or Travelstore function. Setting the sensitivity o...
Page 17 - Listening to stored stations; Starting SCAN; Setting the scanning time
54 Listening to stored stations Select the memory bank or waveband. Press one of the station buttons 1 - 6 8 . The stored station is played if it can be re-ceived. Scanning receivable stations (SCAN) You can use the scan function to play all the receivable stations briefl y. You can set the scanning ...
Page 18 - SOURCE; Confi guring the display
55 EN GLISH type at a later point in time, the radio will automatically switch from the cur-rently tuned station or from CD mode or CD-changer mode to the station whose programme type matches the one you selected. If you do not want this PTY EON switching, disable PTY. First, switch to radio mode us...
Page 19 - TRAF
56 Traffi c information Your device is equipped with an RDS-EON receiver. EON ( E nhanced O ther N etwork) ensures that whenever a traffi c announce-ment (TA) is broadcast, the system switch-es automatically from a station that does not provide traffi c reports to the appropri-ate traffi c information ...
Page 20 - Risk of severe damage; Selecting tracks
57 EN GLISH CD mode You can use this device to play standard au-dio CDs, CD-Rs and CD-RWs with a diame-ter of 12 cm. To avoid problems when play-ing self-burned CDs, you should not burn CDs at speeds greater than 16-speed. Risk of severe damage to the CD drive! CD singles with a diameter of 8 cm and...
Page 22 - Displaying CD text; Switching CD text on/off; Ejecting a CD
59 EN GLISH Displaying CD text Some CDs include CD text. The CD text might contain the names of the artist and the album. The CD text is shown as scrolling text on the display with every track change. Switching CD text on/off Press the MENU/OK button ; . Press the or button < repeatedly until ...
Page 23 - This chapters; WMA fi; Preparing an MP3 data carrier; Preparing an MP3 CD; Directories
60 MP3/WMA mode You can also use this car sound system to play CD-Rs and CD-RWs as well as USB data carriers that contain MP3 music fi les. You can also play WMA fi les. This chapters deals only with playing MP3 fi les since the operation for MP3 and WMA fi les is identical. Notes: WMA fi les with Digi...
Page 24 - To ensure uninterrupted playback:; Preparing a USB data carrier; Switching to MP3 mode; Activating the MP3 mode of CD
61 EN GLISH If you like your fi les to be in the specifi c or-der, save the fi les on the data carrier in the desired sequence in which you want to play them later. The devices plays back the fi les in the order in which they were physically stored on the data carrier. To play back fi les in this device,...
Page 26 - Fast search; Cancelling MIX
63 EN GLISH Fast search To fast seek tuning backwards or forwards, press and hold down the or button 9 until fast searching backwards/for- wards begins. Random track play (MIX) To play the tracks in the current directory in random order, press the 3 MIX button 8 once or sev- eral times until "MI...
Page 27 - Switching to CD changer mode; Selecting CDs
64 Cancelling Repeat To stop the current track or current direc-tory from being repeated, press the 4 RPT button 8 once or sev- eral times until "RPT OFF" is displayed. The RPT symbol disappears from the dis-play. Interrupting playback (PAUSE) To stop the playback, press the 3 button 8 . ...
Page 28 - Cancelling Repeat
65 EN GLISH Repeating individual tracks or whole CDs (REPEAT) To repeat the current track, press the 4 RPT button 8 once or several times until "RPT TRACK" is dis-played. The display shows the RPT symbol. To repeat the current CD, press the 4 RPT button 8 once or several times until "RPT...
Page 29 - Setting the time
66 Confi guring the display You can choose from various display op-tions in CD changer mode: Track number and playing time Track number and time CD number and track number To switch between the display options, press the ESC/DIS button 5 once or several times until the desired display appears. • • •...
Page 30 - Sound; Note
67 EN GLISH Displaying the time continuously when the device is off and the ignition is on To display the time when the device is off and the vehicle ignition is on, press the MENU/OK button ; . Press the or button < repeatedly until "CLOCK OFF" or "CLOCK ON" ap-pears on the displ...
Page 31 - AUDIO; Adjusting the BASS; AUDIO; Adjusting the TREBLE; AUDIO
68 The following table shows an overview of the setting options: BASS TREBLE MIDDLE Level (GAIN) x x x Frequency (FREQ) x x x Quality factor (QFAC) x – x To adjust the bass and treble levels quickly and conveniently for a simple sound adjust-ment, these settings are located directly in the AUDIO men...
Page 35 - Adjusting X-BASS boost
72 X-BASS X-Bass allows you to increase the bass at low volume. The selected X-Bass setting is effective for all audio sources (radio, CD, CD changer or AUX). For X-BASS, either the basic function X-BASS boost or the equalizer X-BASS (E-XBASS) is available. The basic function allows you to adjust th...
Page 36 - Adjusting the display brightness
73 EN GLISH Equalizer presettings Display Equalizer presettings (PRESETS) This device features an equaliser in which the settings for the music genres "ROCK", "POP" and "CLASSIC" are already pro-grammed. To select an equalizer setting, press the AUDIO button 7 . "BASS"...
Page 39 - Technical data; Amplifi er
76 Factory settings: Volume of traffi c announcements (TA VOL) 30 Power-on volume (ON VOL) LAST VOL Volume of muting (MUTE LEVEL) 0 Volume of telephone/navigation announce-ment (TEL VOL) 25 Seek tuning sensitivity (SENS) HI6 Scan time (SCAN TIME) 10 Programme type (PTY) OFF PTY language (PTY LANG) EN...
Page 41 - BP; Gerätepass
460 Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim Name: ..................................................................... Typ: .................................................................... Serien-Nr: BP ................................................................ Gerätep...
