Blaupunkt DAB47 - Manual

65 EN GLISH Adjusting the volume Note: The internal amplifi er can be switched off. If the loudspeakers do not emit any sound, please read the section entitled “Switching the internal amplifi er on/off” in the “Amplifi er” chapter. You can adjust the volume in steps from 0 (off) to 50 (maximum). To inc...

67 EN GLISH Note: The optimum setting for the speed-dependent volume adjustment feature depends on how noise levels develop in your particular vehicle. You will need to test various settings in order to fi nd out which is best suited to your vehicle. Press the or button 6 repeat- edly until “BEEP VOL...

68 DAB mode You can enjoy radio in digital audio quality thanks to DAB ( D igital A udio B roadcast). Note: You need a special DAB antenna in or-der to operate the Nashville DAB 47. This can be a separate DAB roof/win-dow antenna or a DAB/AM/FM com-bination antenna. You can obtain fur-ther informati...

70 Select the setting that you want using the buttons 6 . When you have fi nished making your chang-es, press the MENU•OK button 7 and then the DIS•ESC button 5 to exit the menu. Note: Since this function is not supported by all broadcasters, it is possible that you will not receive any traffi c annou...

71 EN GLISH Manually tuning an ensemble You can also tune into ensembles manually. Press the or button 6 during seek tuning. You can now tune the radio manually using the or button 6 . Selecting programmes After you have tuned into an ensemble, you can select a programme from the ensem-ble. Select a...

72 Notes: Any programmes that were previ-ously stored in this memory bank are deleted in the process. You cannot use the DAB Travelstore feature if the PTY function is acti-vated. Press and hold down the BND•TS but- ton 4 for longer than two seconds. The storing procedure begins. “TRAVEL STORE PLEAS...

73 EN GLISH Assigning a programme type to a station button Select a programme type using the or button 6 . Press and hold the desired station but-ton 1 - 5 : for longer than two sec- onds. The programme type is stored on the se-lected button 1 - 5 : . Setting the DAB waveband With the Nashville DAB4...

75 EN GLISH Press the or button 6 repeat- edly until “R-TXT ON” or “R-TXT OFF” appears on the display. Press the or 6 to switch between “RADIO TXT ON” and “RADIO TXT OFF”. When you have fi nished making your chang-es, press the MENU•OK button 7 and then the DIS•ESC button 5 to exit the menu. Setting ...

76 Radio mode This device is equipped with an RDS radio receiver. Many of the receivable FM stations broadcast a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears on the display as soon as the tuner ...

77 EN GLISH Selecting the waveband / memory bank This device can receive programmes broad-cast over the FM frequency range as well as the MW and LW (AM) wavebands. There are three memory banks available for the FM waveband (FM1, FM2 and FMT) and one for each of the MW and LW wavebands. Five stations...

79 EN GLISH Setting the scanning time Press the MENU•OK button 7 . “TUNER MENU” appears on the display. Press the or button 6 repeatedly until “VARIOUS MENU” appears on the display. Press the MENU•OK button 7 to dis- play the menu. “SCAN TIME” and the currently set time are displayed. Set the scanni...

81 EN GLISH Switching SHARX on/off Press the MENU•OK button 7 . “TUNER MENU” appears on the display. Press the MENU•OK button 7 to dis- play the tuner menu. Press the or button 6 repeatedly until “SHARX” appears on the display. Press the or button 6 to switch SHARX on/off. “SHARX OFF” means automati...

82 Traffi c information Your device is equipped with an RDS-EON receiver. EON stands for E nhanced O ther N etwork. Whenever a traffi c announcement (TA) is broadcast, the system switches automati-cally from a station that does not provide traffi c reports to the appropriate traffi c in-formation statio...

83 EN GLISH You can adjust the sound settings and volume distribution settings for traffi c announcements. For further information, please read the “Sound” chapter. • CD mode You can use this device to play standard au-dio CDs, CD-Rs and CD-RWs with a diame-ter of 12 cm. To avoid problems when play-i...

85 EN GLISH Repeating tracks (REPEAT) If you want to repeat a track, press the RPT 4 button : . “RPT TRK ON” appears briefl y on the dis-play and the RPT symbol is displayed. The track is repeated continuously until you de-activate RPT. Cancelling REPEAT If you want to cancel the repeat function, pre...

86 Switching CD text on/off Press the MENU•OK button 7 . Press the or button 6 repeatedly until “VARIOUS MENU” appears on the display. Press the MENU•OK button 7 . Press the or button 6 repeatedly until “CD TEXT” or “CD NAME” appears on the display. Use the buttons 6 to switch be- tween the “CD TEXT...

87 EN GLISH Press the or button 6 repeat- edly until “CD NAME EDIT” appears on the display. Press the MENU•OK button 7 . Press and hold down the MENU•OK button 7 . After approx. four sec- onds you will hear a beep and “DELETE NAME” appears on the display. Release the MENU•OK button 7 . The CD name w...

88 MP3 mode You can also use this car sound system to play CD-Rs and CD-RWs that contain MP3 music fi les. Preparing an MP3 CD The various combinations of CD burners, CD burning software and CD blanks may lead to problems arising with the device’s ability to play certain CDs. If problems oc-cur with ...

89 EN GLISH If you like your fi les to be in the correct or-der, you should use burner software that places fi les in alphanumerical order. If your software does not provide this feature you also have the option of sorting the fi les manually. For this purpose, you must en-ter a number in front of each...

90 “TRACK AND DIR MODE”: First line: Directory number and track number. Second line: Playing time. “CLOCK MODE” : First line: Directory number and track number. Second line: Directory name and clock time To switch between the different display op-tions, press the DIS•ESC button 5 . Selecting a direc...

91 EN GLISH MP3 mode Selecting tracks in browse mode Browse mode conveniently allows you to view the tracks contained in a directory and then select a particular track. During MP3 playback, repeatedly press the DIS•ESC button 5 until “MP3 BROWSE MODE” is displayed. Press the or button 6 to display a...

94 SD/MMC mode You can play fi les stored on an SD/MMC ( M ulti- M edia C ard / S ecure D igital) using the Nashville DAB47. You can write data onto the SD/MMC that you want to use with the Nashville DAB47 with the help of a standard SD/MMC card reader and your PC. Note: Please note that when you pre...

96 Press the or button 6 to display all the tracks contained in the directory one after another. If you want to select the currently displayed title, press MENU•OK button 7 . Fast searching (not in MP3 browse mode) To fast search backwards or forwards, press and hold down the or button 6 until fast ...

105 EN GLISH CLOCK time Displaying the time You can make the clock time appear continu-ously in the bottom part of the display while any audio source is activated. For further in-formation, please read the “Confi guring the display” sections in the relevant chapters. Setting the clock automatically Y...

106 Displaying the time continuously when the device is off and the ignition is on To display the time when the device is off and the vehicle ignition is on, press the MENU•OK button 7 . Press the or button 6 repeat- edly until “CLOCK MENU” appears on the display. Press the MENU•OK button 7 . Press ...

107 EN GLISH Setting the left/right volume distribution (balance) To adjust the left/right volume distribution (balance), press the AUD•DEQ button ; . Press the or button 6 repeat- edly until “BALANCE” appears on the display. Press the or button 6 to adjust the balance (right/left). Press the AUD•DE...

108 Equalizer The device features a digital equalizer DEQ+. This means you have three 5-band equal-izers, six sound presets and seven vehicle presets at your disposal. You can confi gure the EQ1 - EQ3 equaliz-ers manually. When doing so you can ad-just (boost or reduce) one frequency of an equalizer ...

109 EN GLISH Press and hold down the AUD•DEQ button ; for longer than two sec- onds. Press the or button 6 repeat- edly until “CAR PRESETS” appears on the display. Press the MENU•OK button 7 . Press the or button 6 repeatedly until the vehicle type that you want is displayed. Press the MENU•OK butto...

111 EN GLISH Press the or button 6 repeated- ly until “ANGLE” appears on the display with the current setting. Press the or button 6 to adjust the viewing angle. When you have fi nished making your chang-es, press the MENU•OK button 7 and then the DIS•ESC button 5 to exit the menu. 쏅 쏅 쏅 Adjusting th...

512 Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim Name: ..................................................................... Typ: .................................................................... Serien-Nr: BP ................................................................ Gerätep...