Blaupunkt CR 67 - User Manual

6 Electrical Connections and Installation @/<?#&*>@! To avoid the aggravation of costly mistakes and serious damage that could make youfeel this way, please carefully read all of the instructions before you begin. Carefully follow allinstructions. You’ll be glad you did! GENERAL RECOMMENDA...

8 Installation Recommendations • Carefully choose the mounting location so that the unit won’t interfere with normal driving.• Avoid mounting locations where the unit would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would subject to dust, di...

9 to dashboard/center console Slit BracketSupport BracketSupport to dashboard/center console max. size M5x8 max. size M5x8 max. size M5x8 max. size M5x8 2 NISSAN 2 TOYOTA 1 Mounting the Unit in a Japanese Car You may have difficulty mounting this unit in some Japanese cars that have ISO mounting fea...

10 Maintenance Removing the Unit Use the Release Keys as shown below. Keep them in a safe place in case you need them in thefuture. Fuse Replacement When replacing the fuse, be sure to use one with the correct amperage, which will be stated onthe fuse case. Never use a fuse that has a stated amperag...

11 Specifications Audio Power Specifications Power Output and Total Harmonic Distortion: 5.5 watts per channel minimum continuous averageoutput into 4 ohms, 4 channels driven, from 30-15,000 Hz with no more than 1% total harmonicdistortion. Other Specifications Tuner FMTuning Range: 87.5 - 107.9 MHz...

12 Location of Controls 1. REL (Release) Button 2. PWR (Power) Button 3. Source (and Radio Band) Select 4. Cassette Eject 5. Mute/Audio Button/Clock Adjust:00 6. SCA (Scan) TS (Travel Store) 7. LD (Loudness)/ SENS (Tuning Sensitivity) 8. Cassette Insertion Slot 9. CLK/Display Change 10/11. Tape Prog...

13 Ignition-OnUnit lights up and clock is displayed.Release for Detachable FaceplatePush REL to detach face. Already-inserted cassette remains in unit. Current settings and sourcemode are stored. If power was not switched off before face removed, unit will automatically power-on when face is reattac...

14 Loudness (LD)Press LD to increase sound of low and high frequencies. LOUD icon appears. To cancel, press LDagain. Radio Operation Last Station MemoryEach FM bank and AM band has its own last station memory which holds last-tuned frequency forthat band or bank irrespective of whether that frequenc...

15 seconds to store current frequency. Audio is muted during storage, preset number appears, andbeep acknowledges storage. Preset Station SelectionPress desired Preset Button. Travel StoreThis feature allows you to automatically store stations onto all 5 preset buttons and is especiallyuseful when t...

16 General Trouble Cause/Solution No sound. • Adjust the volume with the + button.• With a two-speaker system set the fader control to the center position. Radio reception Trouble Cause/Solution* Preset stations are not receivable. • The broadcast is too weak. Automatic tuning is not possible. • The...