Blaupunkt CM147 - User Manual

6 Electrical Connections and Installation @/<?#&*>@! To avoid the aggravation of costly mistakes and serious damage that could makeyou feel this way, please carefully read all of the instructions before you begin. Carefully follow allinstructions. You’ll be glad you did! GENERAL RECOMMENDA...

8 Installation Recommendations • Carefully choose the mounting location so that the unit won’t interfere with normal driving.• Avoid mounting locations where the unit would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would subject to dust, di...

9 to dashboard/center console 2 NISSAN Mounting the Unit in a Japanese Car You may have difficulty mounting this unit in some Japanese cars that have ISO mounting features(side-bracket mounting systems). In this case, consult your Blaupunkt dealer.1 Run a blade along the slits on the back of the fro...

10 Maintenance Removing the Unit Use the Release Keys as shown below. Keep them in a safe place in case you need them in thefuture. Fuse Replacement When replacing the fuse, be sure to use one with the correct amperage, which will be stated on thefuse case. Never use a fuse that has a stated amperag...

12 Specifications Audio Power Specifications Power Output and Total Harmonic Distortion: 13.5 watts per channel minimum continuous averageoutput into 4 ohms, 4 channels driven, from 30-15,000 Hz with no more than 1% total harmonicdistortion. Other Specifications Tuner FMTuning Range: 87.5 - 107.9 MH...

13 Location of Controls 1. REL (Release) Button 2. Mute/Audio Button Mute, Bass, Treble, Balance/Fade AccessName Storing/Deletion/ExitMinute: 00 3. SCA (Scan) ButtonStation Scan,Preset Scan,Track Scan,Disc Scan 4. DIS (Display)/MENU Button Display ChangeMenu AccessDemo Message Off/On (8 second press...

14 Instructions — General Operation See Traffic Safety & Precautions on page 4. “Press” means a momentary press of less than 1/2 second. All presses requiring more than 1/2second are followed by beep. (Beep for all button presses available through Direct SoftwareControl Menu.) “Time Out” When ad...

17 Cassette Tape Player Operation Once playback location change is complete, tape display sequence follows. Cassette Insertion & Eject“LOADING” appears upon insert and cassette play follows. Press Eject for a motorized eject.“EJECT” appears and radio plays. The following indicates what happens w...

20 Changer ResetIn unlikely case of CD changer trouble, reset CD changer by turning unit’s power and/or ignition off,and then power on unit. (See TROUBLESHOOTING on page 23.) Changer Track Program Memory (Skip/Play/Memory) Allows you to play only those tracks you want to hear. Programming a Disc1. I...

24 CD Changer operation Trouble Cause/Solution CD play does not start. • Dusty or defective disc.• The ambient temperature is more than 50 ° C (120 ° F). The disc cannot be loaded or is • The disc is inserted with the printed side downwards. automatically ejected. The sound skips due to vibration. •...